This research was supported by Cornell University. This work made use of the Cornell Center for Materials Research Shared Facilities, which are supported through the NSF MRSEC program (Grant DMR-1120296). S.R.N. acknowledges support by an NSF Graduate Research Fellowship (Grant DGE- 1650441) and Dr. Dave Holowka for assistance with the calcium experiments. Any opinion, findings, and conclusions or recommendations expressed in this material are those of the authors(s) and do not necessarily reflect the views of the National Science Foundation.

NOTE: Concentrated acids and bases are used in this synthesis. Use all appropriate safety practices when performing the reaction including the use of engineering controls (fume hood) and personal protective equipment (PPE) including safety glasses, gloves, lab coat, full length pants, and closed-toe shoes.
1. Preparation of [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]Cl5
<ol>
	<li>Synthesis of [Ru(NH3)5Cl]Cl2 12
	<ol>
		<li>Dissolve 1.00 g of RuCl3&#183;nH2O (40% Ru by weight, 4.1 mmol) in 5 mL of H2O. Cool the dark brown solution to 0 &#176;C in an ice bath. Add 11 mL (0.23 mol) of 80% hydrazine hydrate solution in a dropwise manner. The initial reaction will be vigorous with the evolution gas, resulting in a brown solution. Let the resulting solution stir at room temperature for 16 h; the final solution will be dark red. 
		Caution: Hydrazine is acutely toxic and carcinogenic. Additionally, anhydrous forms of this reagent are explosive. As always, use appropriate PPE and fume hoods when handling. Do not concentrate these solutions to dryness.</li>
		<li>To this solution, add approximately 5-10 mL of concentrated HCl to adjust the pH to 2. At this point, the solution will be yellow-brown in color.</li>
		<li>Heat this solution at 105 &#176;C while stirring for 1-2 h. A yellow solid will precipitate out of solution. When no more precipitate visibly forms, remove from heat.</li>
		<li>Allow the reaction mixture to cool to room temperature, and then place in a 0 &#176;C ice bath for 10 min. Collect the yellow solid by vacuum filtration and wash with 5 mL each of ethanol and diethyl ether.</li>
		<li>Completely dissolve the crude product in 15-25 mL of hot water. Chill 10 mL of a concentrated HCl solution in a filter flask by placing it in an ice bath. Filter the yellow solution into the chilled HCl solution to induce precipitation of a pale yellow pure solid. Filter this precipitate and wash with 5 mL each of 0.5 M HCl, ethanol and ether.</li>
		<li>Characterize the compound using IR spectroscopy. Verify purity by the identification of stretching frequencies at 3226 cm-1, 1604 cm-1, 1297 cm-1, and 801 cm-1. A common minor impurity at 2069 cm-1 is assigned to [Ru(NH3)5N2]Cl3.</li>
	</ol>
	</li>
	<li>Synthesis of [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]Cl5
	<ol>
		<li>Dissolve 100 mg (0.34 mmol) [Ru(NH3)5Cl]Cl2 in 50 mL of 1 M NH4OH in a 200 mL heavy wall round-bottomed pressure vessel. Loosely cap the flask with a stopper and heat the reaction mixture at 75 &#176;C for 6 h. Remove from heat and stir at room temperature for 4 days to yield a dark green solution. 
		Caution! Heating a sealed vessel results in a pressure build-up. Make sure to use appropriate pressure-safe glassware. For this reaction, the purpose of sealing the vessel is to minimize loss of gaseous NH3. Therefore, place the stopper loosely to allow for release of excess pressure.</li>
	</ol>
	</li>
	<li>Purification by cation-exchange chromatography
	<ol>
		<li>In a 25 mL beaker, suspend 5 g cation-exchange resin (e.g., Dowex 50WX2 200-400 mesh (H+ form) in 10 mL 0.1 M HCl.</li>
		<li>Load this slurry into a 10 mL column (10 mm diameter, 15 cm height) affixed with a 50 mL solvent reservoir. Wash the resin with approximately 20-30 mL of 0.1 M HCl, until the eluate is colorless.</li>
		<li>Return to the green reaction solution isolated in step 1.2.1. To this solution, add concentrated HCl to adjust the pH to 2, at which point the solution color changes to brown.</li>
		<li>Load this acidified solution to the cation-exchange resin column prepared in step 1.3.2 by gently pipetting it on top of the resin. Let the eluate completely drain, and continue loading the solution. Repeat this process until the entire solution has been added. The top of the resin will be dark brown/black. The resin will decrease in volume slightly.</li>
		<li>Use glass beads to cover the top of the resin. These will prevent the resin from being disturbed when new solutions are added.</li>
		<li>Elute the column with 20 mL of 1 M HCl.</li>
		<li>Elute the column with an increased HCl concentration of 1.5 M (&#8776; 50 mL). A yellow solution will begin to come off the column. Increase the HCl concentration to 2 M and continue eluting until the eluate is colorless or a very pale green-yellow. A total volume of 150-200 mL will be required for this process.</li>
		<li>Increase the HCl concentration to 2.5 M (20-50 mL). Collect the eluate as fractions in test tubes. Increase to 3 M HCl. The product will elute from the column as a green-brown solution. A red-brown fraction may also begin to come off of the column. As these fractions are oxidized ruthenium red impurities, do not pool with the green-brown fractions.</li>
	</ol>
	</li>
	<li>Characterization and verification of purity of [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]Cl5
	<ol>
		<li>Test all of the fractions from step 1.3.8. by UV-vis spectroscopy. To accomplish this task, add 100 &#181;L of a given fraction into 2 mL of 3 M NH3 and analyze by UV-vis spectroscopy. Fractions containing pure product will have a large absorbance band at 360 nm and a less intense absorbance at 600 nm. Absorbance at 480 or 533 nm is indicative of oxidized ruthenium red and ruthenium red impurities, respectively.</li>
		<li>Pool fractions containing pure product and evaporate the solution to dryness by rotary evaporation. The product will be isolated as a green-brown solid. Yields are typically on the order of 5-15 mg (10-20% yield). Single-crystals, suitable for X-ray diffraction, can be obtained by the vapor diffusion of ethanol into aqueous solutions of the compound.</li>
		<li>To verify purity, analyze the compound by UV-vis spectroscopy in a solution of pH 7.4 phosphate-buffered saline (PBS). Purity may be assessed by taking the ratio of intensity of the 360 nm and 600 nm peaks. This ratio is 31 for a pure compound. For impure compounds, the ratio will be smaller.</li>
		<li>Analyze the sample in the solid-state by IR spectroscopy. Diagnostic bands are at 3234 cm-1, 3151 cm-1, 1618 cm-1, 1313 cm-1, and 815 cm-1. Common impurity bands are seen at 1762 cm-1 and 1400 cm-1, characteristic of NH4Cl. Ruthenium red can be identified by bands at 1404 cm-1, 1300 cm-1, 1037 cm-1 and 800 cm-1.</li>
	</ol>
	</li>
	<li>Evaluation of mitochondrial calcium uptake inhibition by fluorescence spectroscopy 
	Caution! The following procedures use mammalian cells. Work should be carried out in appropriate laminar flow hoods that are certified for biological safety level 2 (BSL2) research. 
	&#8203;NOTE: [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]Cl5 will be referred to as [Ru] in this section
	<ol>
		<li>Make buffered glucose-containing saline solution (BGSS) as the assay media. BGSS is a solution comprising 110 mM KCl, 1 mM KH2PO4, 1 mM MgCl2, 20 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES), 5 mM sodium succinate, 30 &#181;M ethylene glycol-bis(&#946;-aminoethyl ether)-N,N,N&#39;,N&#39;-tetraacetic acid (EGTA). Combine everything except the EGTA, adjust pH to 7.4. Add EGTA and readjust pH to 7.4. For 50 mL of assay media add 0.5 mL of 1 mg/mL glucose.</li>
		<li>Culture HeLa cells in 500 cm2 Petri dishes in Dulbecco&#39;s Modified Eagle Medium (DMEM) with 10% fetal bovine serum (FBS) in a humidified incubator with 5% CO2 at 37 &#176;C. Amplify HeLa cells growing in a 100 mm Petri dish by seeding them in a 500 cm2 petri dish. The total media volume in the large dish is 115 mL. Each large dish will yield approximately 18 million cells, enough for two fluorescence spectroscopy experiments.
		<ol>
			<li>Grow the cells until they reach 90-95% confluency. Remove media, and rinse the cells with 15 mL pH 7.4 PBS. Add 15 mL of 1 mM ethylenediaminetetraacetic acid (EDTA) in PBS and incubate for 10 min to detach the cells. Transfer the cells to 14 mL round bottom falcon tubes</li>
		</ol>
		</li>
		<li>Count cells using trypan blue and a hemocytometer with an inverted microscope, and calculate the total number of cells and the volume of media needed to reach 7.5 million cells per 1.8 mL volume of medium. Centrifuge the cells for 10 min at 5310 &#215; g. Decant the supernatant and add the calculated volume of BGSS. Resuspend cells gently.
		<ol>
			<li>For this assay, prepare stock solutions of 40 mM digitonin in dimethyl sulfoxide (DMSO), 1 mM Calcium Green-5N in H2O, and 10 mM CaCl2 in H2O. [Ru] stock solutions, prepared in pure water, can range from 1-3 mM. 
			&#8203;NOTE: Calcium Green-5N is light-sensitive. Store in the dark and minimize light exposure.</li>
		</ol>
		</li>
		<li>Setup the fluorimeter to excite at 506 nm and read the emission at 532 nm with the cuvette-holder controlled at 37 &#176;C. Prepare an acrylic cuvette with a stir bar or wheel, 1.8 mL cell suspension from 1.5.2 above, 1.8 &#181;L digitonin solution, 3.6 &#181;L Calcium Green-5N (solution), and 9 &#181;L [Ru] (for 1 mM stock solution, 5 &#181;M final concentration). Incubate cells for 15 min in the fluorimeter.
		<ol>
			<li>Read the data as the excitation/emission ratio instead of the raw absorption. This practice minimizes errors associated with fluctuations in the light source intensity.</li>
			<li>Carry out the first sample analysis in the absence of [Ru] to measure the effect of the addition of CaCl2 on the response of the cells.</li>
			<li>Begin analysis on the fluorimeter with the settings described in 1.5.4. Wait approximately 2 minutes to establish a stable emission baseline, and then add 1.8 &#181;L of CaCl2 (10 &#181;M final concentration). The emission intensity will increase immediately upon the addition of the CaCl2, and will then decay over the course of minutes as the calcium ions enter the mitochondria. Wait until the decay has finished (&#8776;5 min). Add additional calcium boluses to determine the mitochondrial calcium uptake response of cells not treated with [Ru].</li>
		</ol>
		</li>
		<li>In another cuvette containing 5 &#181;M [Ru], repeat the experiment as described above in 1.5.4.3. In the presence of the inhibitor, emission intensity will increase, but not decay. This observation signifies blocked mitochondrial calcium uptake.</li>
	</ol>
	</li>
</ol>

<ol>
	<li>De Stefani, D., Rizzuto, R., Pozzan, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Enjoy+the+trip:+Calcium+in+mitochondria+back+and+forth.">Enjoy the trip: Calcium in mitochondria back and forth.</a> Annu. Rev. Biochem. 85, 161-192 (2016).</li><li>Contreras, L., Drago, I., Zampese, E., Pozzan, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mitochondria:+the+calcium+connection.">Mitochondria: the calcium connection.</a> Biochim. Biophys. Acta. 1797 (6-7), 607-618 (2010).</li><li>Giorgi, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mitochondrial+calcium+homeostasis+as+potential+target+for+mitochondrial+medicine.">Mitochondrial calcium homeostasis as potential target for mitochondrial medicine.</a> Mitochondrion. 12 (1), 77-85 (2012).</li><li>De Stefani, D., Raffaello, A., Teardo, E., Szab&#242;, I., Rizzuto, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+forty-kilodalton+protein+of+the+inner+membrane+is+the+mitochondrial+calcium+uniporter.">A forty-kilodalton protein of the inner membrane is the mitochondrial calcium uniporter.</a> Nature. 476 (7360), 336-340 (2011).</li><li>Baughman, J. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrative+genomics+identifies+MCU+as+an+essential+component+of+the+mitochondrial+calcium+uniporter.">Integrative genomics identifies MCU as an essential component of the mitochondrial calcium uniporter.</a> Nature. 476 (7360), 341-356 (2011).</li><li>Kamer, K. J., Mootha, V. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+molecular+era+of+the+mitochondrial+calcium+uniporter.">The molecular era of the mitochondrial calcium uniporter.</a> Nat. Rev. Mol. Cell Biol. 16 (9), 545-553 (2015).</li><li>Ying, W. -. L., Emerson, J., Clarke, M. J., Sanadi, D. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inhibition+of+mitochondrial+calcium+ion+transport+by+an+oxo-bridged+dinuclear+ruthenium+ammine+complex.">Inhibition of mitochondrial calcium ion transport by an oxo-bridged dinuclear ruthenium ammine complex.</a> Biochemistry. 30 (20), 4949-4952 (1991).</li><li>Emerson, J., Clarke, M. J., Ying, W. -. L., Sanadi, D. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+component+of+"ruthenium+red"+responsible+for+inhibition+of+mitochondrial+calcium+ion+transport.+Spectra,+electrochemistry,+and+aquation+kinetics.+Crystal+structure+of+&#181;-O-[(HCO2)(NH3)4Ru]2Cl3.">The component of "ruthenium red" responsible for inhibition of mitochondrial calcium ion transport. Spectra, electrochemistry, and aquation kinetics. Crystal structure of &#181;-O-[(HCO2)(NH3)4Ru]2Cl3.</a> J. Am. Chem. Soc. 115 (25), 11799-11805 (1993).</li><li>Matlib, M. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oxygen-bridged+Dinuclear+Ruthenium+Amine+Complex+Specifically+Inhibits+Ca2++Uptake+into+Mitochondria+in+Vitro+and+in+Situ+in+Single+Cardiac+Myocytes.">Oxygen-bridged Dinuclear Ruthenium Amine Complex Specifically Inhibits Ca2+ Uptake into Mitochondria in Vitro and in Situ in Single Cardiac Myocytes.</a> J. Biol. Chem. 273 (17), 10223-10231 (1998).</li><li>Oxenoid, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Architecture+of+the+mitochondrial+calcium+uniporter.">Architecture of the mitochondrial calcium uniporter.</a> Nature. 533 (7602), 269-273 (2016).</li><li>Nathan, S. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthetic+Methods+for+the+Preparation+of+a+Functional+Analogue+of+Ru360,+a+Potent+Inhibitor+of+Mitochondrial+Calcium+Uptake.">Synthetic Methods for the Preparation of a Functional Analogue of Ru360, a Potent Inhibitor of Mitochondrial Calcium Uptake.</a> Inorg Chem. 56 (6), 3123-3126 (2017).</li><li>Allen, A. D., Senoff, C. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+and+infrared+spectra+of+some+ammine+complexes+of+ruthenium(II)+and+ruthenium(III).">Preparation and infrared spectra of some ammine complexes of ruthenium(II) and ruthenium(III).</a> Can. J. Chem. 45 (12), 1337-1341 (1967).</li><li>Murphy, A. N., Bredesen, D. E., Cortopassi, G., Wang, E., Fiskum, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bcl-2+potentiates+the+maximal+calcium+uptake+capacity+of+neural+cell+mitochondria.">Bcl-2 potentiates the maximal calcium uptake capacity of neural cell mitochondria.</a> Proc. Natl. Acad. Sci. USA. 93 (18), 9893-9898 (1996).</li><li>Deak, A. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessment+of+mitochondrial+Ca&#8314;+uptake.">Assessment of mitochondrial Ca&#8314; uptake.</a> Meth. Molec. Biol. 1264, 421-439 (2015).</li></ol>

The authors have nothing to disclose

The mitochondrial calcium uptake inhibitor [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]Cl5 can be synthesized from [Ru(NH3)5Cl]Cl2, a well known ruthenium(III) starting material, as described in this procedure. The synthesis of [Ru(NH3)5Cl]Cl2 is readily achieved with little difficulty. After stirring RuCl3 for 16 h in hydrazine hydrate, the pH of the solution should be adjus...

Mitochondrial calcium is a key regulator for a number of processes that are critical to normal cell function, including energy production and apoptosis.1,2,3 The mitochondrial calcium uniporter (MCU), an ion transporter protein that resides on the inner mitochondrial membrane, regulates the influx of calcium ions into the mitochondria.4,5,6 Chemical inhibitors of the MCU are valuable tools for continuing efforts to study the function and cellular roles of this transport protein and mitochondrial calcium. The compound [(HCO2)(NH3)4Ru(&#181;-O)Ru(NH3)4(O2CH)]3+, Ru360, is one of the only known selective inhibitors for the MCU with a reported Kd value of 24 &#181;M.7,8,9,10 This complex is a common impurity found in commercial formulations of ruthenium red (RuRed), a triruthenium di-&#181;-oxo bridged hexacation of the formula [(NH3)5Ru(&#181;-O)Ru(NH3)4(&#181;-O)Ru(NH3)5)]6+, which has also been used as a calcium uptake inhibitor. Although Ru360 is commercially available, it is very costly. Moreover, the synthesis and isolation of Ru360 is challenged by difficult purification procedures and ambiguous characterization methods.
We have recently reported alternative procedures to access a Ru360 analogue, [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]Cl5.11 This compound inhibits the MCU with high affinity, similar to Ru360. In this protocol, we will describe our most effective synthesis of this compound, which commences from [Ru(NH3)5Cl]Cl2. Purification of the product using strongly acidic cation-exchange resin is detailed, along with common pitfalls for this procedure. We also present methods for characterization and assessment of compound purity, and delineate a simple approach to test its efficacy in blocking mitochondrial calcium uptake.

<table style="border-collapse:collapse;width:663pt" width="884">
	<colgroup>
		<col style="width:182pt" width="243" />
		<col style="width:227pt" width="302" />
		<col style="width:129pt" width="172" />
		<col style="width:125pt" width="167" />
	</colgroup>
	<tbody>
		<tr height="23" style="height:17.25pt">
			<td class="xl69" height="23" style="width:182pt;height:17.25pt" width="243">Ruthenium Trichloride hydrate</td>
			<td class="xl69" style="width:227pt" width="302">Pressure Chemical</td>
			<td class="xl69" style="width:129pt" width="172">3750</td>
			<td class="xl70" style="width:125pt" width="167"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">Concentrated hydrochloric acid</td>
			<td class="xl69" style="width:227pt" width="302">J.T. Baker</td>
			<td class="xl69" style="width:129pt" width="172">9535</td>
			<td class="xl70"></td>
		</tr>
		<tr height="22" style="height:16.5pt">
			<td class="xl69" height="22" style="width:182pt;height:16.5pt" width="243">Concentrated ammonium hydroxide</td>
			<td class="xl71" style="width:227pt" width="302">Mallinckrodt Chemical Works</td>
			<td class="xl71" style="width:129pt" width="172">A669C-2 1</td>
			<td class="xl70"></td>
		</tr>
		<tr height="24" style="height:18.0pt">
			<td class="xl69" height="24" style="width:182pt;height:18.0pt" width="243">Dowex 50 WX2 200-400 Mesh</td>
			<td class="xl69" style="width:227pt" width="302">Alfa Aesar</td>
			<td class="xl69" style="width:129pt" width="172">13945</td>
			<td class="xl70"></td>
		</tr>
		<tr height="25" style="height:18.75pt">
			<td class="xl69" height="25" style="width:182pt;height:18.75pt" width="243">Calcium Green 5N</td>
			<td class="xl69" style="width:227pt" width="302">Invitrogen</td>
			<td class="xl69" style="width:129pt" width="172">C3737</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">Digitonin</td>
			<td class="xl69" style="width:227pt" width="302">Aldrich</td>
			<td class="xl71" style="width:129pt" width="172">260746</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">DMSO</td>
			<td class="xl69" style="width:227pt" width="302">Aldrich</td>
			<td class="xl69" style="width:129pt" width="172">471267</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">EGTA</td>
			<td class="xl69" style="width:227pt" width="302">Aldrich</td>
			<td class="xl69" style="width:129pt" width="172">E3889</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">KCl</td>
			<td class="xl69" style="width:227pt" width="302">USB</td>
			<td class="xl69" style="width:129pt" width="172">20598</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">KH2PO4</td>
			<td class="xl69" style="width:227pt" width="302">Aldrich</td>
			<td class="xl69" style="width:129pt" width="172">P3786</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">MgCl2</td>
			<td class="xl77" style="width:227pt" width="302">Fisher Scientific</td>
			<td class="xl69" style="width:129pt" width="172">M33-500</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">HEPES</td>
			<td class="xl69" style="width:227pt" width="302">Fluka</td>
			<td class="xl69" style="width:129pt" width="172">54466</td>
			<td class="xl70"></td>
		</tr>
		<tr height="22" style="height:16.5pt">
			<td class="xl69" height="22" style="width:182pt;height:16.5pt" width="243">Sodium Succinate</td>
			<td class="xl69" style="width:227pt" width="302">Alfa Aesar</td>
			<td class="xl69" style="width:129pt" width="172">33386</td>
			<td class="xl70"></td>
		</tr>
		<tr height="22" style="height:16.5pt">
			<td class="xl69" height="22" style="width:182pt;height:16.5pt" width="243">EDTA</td>
			<td class="xl69" style="width:227pt" width="302">J.T. Baker</td>
			<td class="xl69" style="width:129pt" width="172">8993-01</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">Glucose</td>
			<td class="xl69" style="width:227pt" width="302">Aldrich</td>
			<td class="xl69" style="width:129pt" width="172">G5000</td>
			<td class="xl70"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl69" height="21" style="width:182pt;height:15.75pt" width="243">200 Round bottom flask</td>
			<td class="xl69" style="width:227pt" width="302">ChemGlass</td>
			<td class="xl75">CG-1506-14</td>
			<td class="xl74" style="width:125pt" width="167"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">Glass stopper</td>
			<td class="xl65" style="width:227pt" width="302">ChemGlass</td>
			<td class="xl65" style="width:129pt" width="172">CG-3000-05</td>
			<td class="xl68"></td>
		</tr>
		<tr height="42" style="height:31.5pt">
			<td class="xl65" height="42" style="width:182pt;height:31.5pt" width="243">10 mm x 15 cm glass column with reservoirs</td>
			<td class="xl77" style="width:227pt" width="302">Custom - similar to Chemglass columns</td>
			<td class="xl77" style="width:129pt" width="172">Similar to CG-1203-20</td>
			<td class="xl68"></td>
		</tr>
		<tr height="20" style="height:15.0pt">
			<td class="xl65" height="20" style="width:182pt;height:15.0pt" width="243">DMEM</td>
			<td class="xl77" style="width:227pt" width="302">Corning</td>
			<td class="xl77" style="width:129pt" width="172">10-017-CV</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">FBS</td>
			<td class="xl77" style="width:227pt" width="302">Gibco</td>
			<td class="xl69" style="width:129pt" width="172">10437028</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">PBS</td>
			<td class="xl77" style="width:227pt" width="302">Corning</td>
			<td class="xl69" style="width:129pt" width="172">21-040-CV</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">Round bottom Falcon tubes</td>
			<td class="xl77" style="width:227pt" width="302">Fisher Scientific</td>
			<td class="xl69" style="width:129pt" width="172">14-959-11B&#160;</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">500 cm2 petri dishes</td>
			<td class="xl65" style="width:227pt" width="302">Corning</td>
			<td class="xl76" style="width:129pt" width="172">431110</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">Trypan blue</td>
			<td class="xl65" style="width:227pt" width="302">ThermoFisher Scientific</td>
			<td class="xl76" style="width:129pt" width="172">15250061</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">Hemacytometer</td>
			<td class="xl65" style="width:227pt" width="302">Aldrich</td>
			<td class="xl76" style="width:129pt" width="172">Z359629</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">Acrylic Cuvettes</td>
			<td class="xl65" style="width:227pt" width="302">VWR&#160;</td>
			<td class="xl76" style="width:129pt" width="172">58017-875</td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl72" height="21" style="width:182pt;height:15.75pt" width="243">UV-Vis spectrometer</td>
			<td class="xl68">Agilent Model Cary 8454&#160;</td>
			<td class="xl65" style="width:129pt" width="172"></td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl72" height="21" style="width:182pt;height:15.75pt" width="243">Spectrofluorimeter</td>
			<td class="xl68">SLM Model 8100C</td>
			<td class="xl65" style="width:129pt" width="172"></td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl72" height="21" style="width:182pt;height:15.75pt" width="243">IR spectrometer</td>
			<td class="xl68">Bruker Hyprion FTIR with ATR attachment</td>
			<td class="xl65" style="width:129pt" width="172"></td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">Centrifuge</td>
			<td class="xl65" style="width:227pt" width="302">ALC Model PM140R</td>
			<td class="xl65" style="width:129pt" width="172"></td>
			<td class="xl68"></td>
		</tr>
		<tr height="21" style="height:15.75pt">
			<td class="xl65" height="21" style="width:182pt;height:15.75pt" width="243">Inverted light microscope</td>
			<td class="xl65" style="width:227pt" width="302">VWR&#160;</td>
			<td class="xl65" style="width:129pt" width="172">89404-462</td>
			<td class="xl68"></td>
		</tr>
	</tbody>
</table>

synthesis and evaluation of a ruthenium-based mitochondrial calcium uptake inhibitor

We detail the synthesis and purification of a mitochondrial calcium uptake inhibitor, [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]5+. The optimized synthesis of this compound commences from [Ru(NH3)5Cl]Cl2 in 1 M NH4OH in a closed container, yielding a green solution. Purification is accomplished with cation-exchange chromatography. This compound is characterized and verified to be pure by UV-vis and IR spectroscopy. The mitochondrial calcium uptake inhibitory properties are assessed in permeabilized HeLa cells by fluorescence spectroscopy.

This method describes a synthesis of the mitochondrial calcium uptake inhibitor [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]Cl5 starting from [Ru(NH3)5Cl]Cl2, a well known ruthenium(III) starting material. [Ru(NH3)5Cl]Cl2 is characterized by IR spectroscopy, with vibrational modes at 3200 cm-1, 1608 cm-1, 1298 cm-1, and 7...

Watch this Scientific Journal Video about Synthesis and Evaluation of a Ruthenium-based Mitochondrial Calcium Uptake Inhibitor at JoVE.com

Synthesis and Evaluation of a Ruthenium-based Mitochondrial Calcium Uptake Inhibitor

A protocol for the synthesis, purification, and characterization of a ruthenium-based inhibitor of mitochondrial calcium uptake is presented. A procedure to evaluate its efficacy in permeabilized mammalian cells is demonstrated.

We detail the synthesis and purification of a mitochondrial calcium uptake inhibitor, [(OH2)(NH3)4Ru(&#181;-O)Ru(NH3)4(OH2)]5+. The optimized synthesis of ...

synthesis-evaluation-ruthenium-based-mitochondrial-calcium-uptake

Research

JoVE Journal

Chemistry

7.8K Views.  Cornell University. A protocol for the synthesis, purification, and characterization of a ruthenium-based inhibitor of mitochondrial calcium uptake is presented. A procedure to evaluate its efficacy in permeabilized mammalian cells is demonstrated.

Video: Synthesis and Evaluation of a Ruthenium-based Mitochondrial Calcium Uptake Inhibitor

Preparation and Use of Samarium Diiodide (SmI2) in Organic Synthesis: The Mechanistic Role of HMPA and Ni(II) Salts in the Samarium Barbier Reaction

Although initially considered an esoteric reagent, SmI2 has become a common tool for synthetic organic chemists. SmI2 is generated through the addition of molecular iodine to samarium metal in THF.1,2-3 It is a mild and selective single electron reductant and its versatility is a result of its ability to initiate a wide range of reductions including C-C bond-forming and cascade or sequential reactions. SmI2 can reduce a variety of functional groups including sulfoxides and sulfones, phosphine oxides, epoxides, alkyl and aryl halides, carbonyls, and conjugated double bonds.2-12 One of the fascinating features of SmI-2-mediated reactions is the ability to manipulate the outcome of reactions through the selective use of cosolvents or additives. In most instances, additives are essential in controlling the rate of reduction and the chemo- or stereoselectivity of reactions.13-14 Additives commonly utilized to fine tune the reactivity of SmI2 can be classified into three major groups: (1) Lewis bases (HMPA, other electron-donor ligands, chelating ethers, etc.), (2) proton sources (alcohols, water etc.), and (3) inorganic additives (Ni(acac)2, FeCl3, etc).3
Understanding the mechanism of SmI2 reactions and the role of the additives enables utilization of the full potential of the reagent in organic synthesis. The Sm-Barbier reaction is chosen to illustrate the synthetic importance and mechanistic role of two common additives: HMPA and Ni(II) in this reaction. The Sm-Barbier reaction is similar to the traditional Grignard reaction with the only difference being that the alkyl halide, carbonyl, and Sm reductant are mixed simultaneously in one pot.1,15 Examples of Sm-mediated Barbier reactions with a range of coupling partners have been reported,1,3,7,10,12 and have been utilized in key steps of the synthesis of large natural products.16,17 Previous studies on the effect of additives on SmI2 reactions have shown that HMPA enhances the reduction potential of SmI2 by coordinating to the samarium metal center, producing a more powerful,13-14,18 sterically encumbered reductant19-21 and in some cases playing an integral role in post electron-transfer steps facilitating subsequent bond-forming events.22 In the Sm-Barbier reaction, HMPA has been shown to additionally activate the alkyl halide by forming a complex in a pre-equilibrium step.23
Ni(II) salts are a catalytic additive used frequently in Sm-mediated transformations.24-27 Though critical for success, the mechanistic role of Ni(II) was not known in these reactions. Recently it has been shown that SmI2 reduces Ni(II) to Ni(0), and the reaction is then carried out through organometallic Ni(0) chemistry.28
These mechanistic studies highlight that although the same Barbier product is obtained, the use of different additives in the SmI2 reaction drastically alters the mechanistic pathway of the reaction. The protocol for running these SmI2-initiated reactions is described.

Preparation and Use of Samarium Diiodide SmI2 in Organic Synthesis: The Mechanistic Role of HMPA and NiII Salts in the Samarium Barbier Reaction

A straightforward procedure for the preparation of samarium diiodide (SmI2) in THF is described. The role of two main additives namely hexamethylphosphoramide (HMPA) and Ni(acac)2 in Sm mediated reactions is demonstrated in the Sm-Barbier reaction.

Although initially considered an esoteric reagent, SmI2 has become a common tool for synthetic organic chemists. SmI2 is generated through the addition of ...

Seeded Synthesis of CdSe/CdS Rod and Tetrapod Nanocrystals

We demonstrate a method for the synthesis of multicomponent nanostructures consisting of CdS and CdSe with rod and tetrapod morphologies. A seeded synthesis strategy is used in which spherical seeds of CdSe are prepared first using a hot-injection technique. By controlling the crystal structure of the seed to be either wurtzite or zinc-blende, the subsequent hot-injection growth of CdS off of the seed results in either a rod-shaped or tetrapod-shaped nanocrystal, respectively. The phase and morphology of the synthesized nanocrystals are confirmed using X-ray diffraction and transmission electron microscopy, demonstrating that the nanocrystals are phase-pure and have a consistent morphology. The extinction coefficient and quantum yield of the synthesized nanocrystals are calculated using UV-Vis absorption spectroscopy and photoluminescence spectroscopy. The rods and tetrapods exhibit extinction coefficients and quantum yields that are higher than that of the bare seeds. This synthesis demonstrates the precise arrangement of materials that can be achieved at the nanoscale by using a seeded synthetic approach.

A protocol for the seeded synthesis of rod-shaped and tetrapod-shaped multicomponent nanostructures consisting of CdS and CdSe is presented.

We demonstrate a method for the synthesis of multicomponent nanostructures consisting of CdS and CdSe with rod and tetrapod morphologies. A seeded ...

Anticancer Metal Complexes: Synthesis and Cytotoxicity Evaluation by the MTT Assay

Titanium (IV) and vanadium (V) complexes are highly potent anticancer agents. A challenge in their synthesis refers to their hydrolytic instability; therefore their preparation should be conducted under an inert atmosphere. Evaluation of the anticancer activity of these complexes can be achieved by the MTT assay.
The MTT assay is a colorimetric viability assay based on enzymatic reduction of the MTT molecule to formazan when it is exposed to viable cells. The outcome of the reduction is a color change of the MTT molecule. Absorbance measurements relative to a control determine the percentage of remaining viable cancer cells following their treatment with varying concentrations of a tested compound, which is translated to the compound anticancer activity and its IC50 values. The MTT assay is widely common in cytotoxicity studies due to its accuracy, rapidity, and relative simplicity.
Herein we present a detailed protocol for the synthesis of air sensitive metal based drugs and cell viability measurements, including preparation of the cell plates, incubation of the compounds with the cells, viability measurements using the MTT assay, and determination of IC50 values.

A method for synthesis of air-sensitive titanium and vanadium anticancer agents is described, along with the evaluation of their cytotoxic activity towards human cancer cell line by the MTT Assay.

Titanium (IV) and vanadium (V) complexes are highly potent anticancer agents. A challenge in their synthesis refers to their hydrolytic instability; ...

Synthesis and Purification of Iodoaziridines Involving Quantitative Selection of the Optimal Stationary Phase for Chromatography

The highly diastereoselective preparation of cis-N-Ts-iodoaziridines through reaction of diiodomethyllithium with N-Ts aldimines is described. Diiodomethyllithium is prepared by the deprotonation of diiodomethane with LiHMDS, in a THF/diethyl ether mixture, at -78 &#176;C in the dark. These conditions are essential for the stability of the LiCHI2 reagent generated. The subsequent dropwise addition of N-Ts aldimines to the preformed diiodomethyllithium solution affords an amino-diiodide intermediate, which is not isolated. Rapid warming of the reaction mixture to 0 &#176;C promotes cyclization to afford iodoaziridines with exclusive cis-diastereoselectivity. The addition and cyclization stages of the reaction are mediated in one reaction flask by careful temperature control.
Due to the sensitivity of the iodoaziridines to purification, assessment of suitable methods of purification is required. A protocol to assess the stability of sensitive compounds to stationary phases for column chromatography is described. This method is suitable to apply to new iodoaziridines, or other potentially sensitive novel compounds. Consequently this method may find application in range of synthetic projects. The procedure involves firstly the assessment of the reaction yield, prior to purification, by 1H NMR spectroscopy with comparison to an internal standard. Portions of impure product mixture are then exposed to slurries of various stationary phases appropriate for chromatography, in a solvent system suitable as the eluent in flash chromatography. After stirring for 30 min to mimic chromatography, followed by filtering, the samples are analyzed by 1H NMR spectroscopy. Calculated yields for each stationary phase are then compared to that initially obtained from the crude reaction mixture. The results obtained provide a quantitative assessment of the stability of the compound to the different stationary phases; hence the optimal can be selected. The choice of basic alumina, modified to activity IV, as a suitable stationary phase has allowed isolation of certain iodoaziridines in excellent yield and purity.

A protocol for the diastereoselective one-pot preparation of cis-N-Ts-iodoaziridines is described. The generation of diiodomethyllithium, addition to N-Ts aldimines and cyclization of the amino gem-diiodide intermediate to iodoaziridines is demonstrated. Also included is a protocol to rapidly and quantitatively assess the most appropriate stationary phase for purification by chromatography.

The highly diastereoselective preparation of cis-N-Ts-iodoaziridines through reaction of diiodomethyllithium with N-Ts aldimines is described. ...

Synthesis and Characterization of Functionalized Metal-organic Frameworks

Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and technological applications. Their signature property is their ultrahigh porosity, which however imparts a series of challenges when it comes to both constructing them and working with them. Securing desired MOF chemical and physical functionality by linker/node assembly into a highly porous framework of choice can pose difficulties, as less porous and more thermodynamically stable congeners (e.g., other crystalline polymorphs, catenated analogues) are often preferentially obtained by conventional synthesis methods. Once the desired product is obtained, its characterization often requires specialized techniques that address complications potentially arising from, for example, guest-molecule loss or preferential orientation of microcrystallites. Finally, accessing the large voids inside the MOFs for use in applications that involve gases can be problematic, as frameworks may be subject to collapse during removal of solvent molecules (remnants of solvothermal synthesis). In this paper, we describe synthesis and characterization methods routinely utilized in our lab either to solve or circumvent these issues. The methods include solvent-assisted linker exchange, powder X-ray diffraction in capillaries, and materials activation (cavity evacuation) by supercritical CO2 drying. Finally, we provide a protocol for determining a suitable pressure region for applying the Brunauer-Emmett-Teller analysis to nitrogen isotherms, so as to estimate surface area of MOFs with good accuracy.

Synthesis, activation, and characterization of intentionally designed metal-organic framework materials is challenging, especially when building blocks are incompatible or unwanted polymorphs are thermodynamically favored over desired forms. We describe how applications of solvent-assisted linker exchange, powder X-ray diffraction in capillaries and activation via supercritical CO2 drying, can address some of these challenges.

Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and ...

Synthesis and Exfoliation of Discotic Zirconium Phosphates to Obtain Colloidal Liquid Crystals

Due to their abundance in natural clay and potential applications in advanced materials, discotic nanoparticles are of interest to scientists and engineers. Growth of such anisotropic nanocrystals through a simple chemical method is a challenging task. In this study, we fabricate discotic nanodisks of zirconium phosphate [Zr(HPO4)2&#183;H2O] as a model material using hydrothermal, reflux and microwave-assisted methods. Growth of crystals is controlled by duration time, temperature, and concentration of reacting species. The novelty of the adopted methods is that discotic crystals of size ranging from hundred nanometers to few micrometers can be obtained while keeping the polydispersity well within control. The layered discotic crystals are converted to monolayers by exfoliation with tetra-(n)-butyl ammonium hydroxide [(C4H9)4NOH, TBAOH]. Exfoliated disks show isotropic and nematic liquid crystal phases. Size and polydispersity of disk suspensions is highly important in deciding their phase behavior.

A two dimensional model material of discotic zirconium phosphate was developed. The inorganic crystal with lamellar structure was synthesized by hydrothermal, reflux, and microwave-assisted methods. On exfoliation with organic molecules, layered crystals can be converted to monolayers, and nematic liquid crystal phase was formed at sufficient concentration of monolayers.

Due to their abundance in natural clay and potential applications in advanced materials, discotic nanoparticles are of interest to scientists and ...

Synthesis and Structure Determination of &#181;-Conotoxin PIIIA Isomers with Different Disulfide Connectivities

Peptides with a high number of cysteines are usually influenced regarding the three-dimensional structure by their disulfide connectivity. It is thus highly important to avoid undesired disulfide bond formation during peptide synthesis, because it may result in a completely different peptide structure, and consequently altered bioactivity. However, the correct formation of multiple disulfide bonds in a peptide is difficult to obtain by using standard self-folding methods such as conventional buffer oxidation protocols, because several disulfide connectivities can be formed. This protocol represents an advanced strategy required for the targeted synthesis of multiple disulfide-bridged peptides which cannot be synthesized via buffer oxidation in high quality and quantity. The study demonstrates the application of a distinct protecting group strategy for the synthesis of all possible 3-disulfide-bonded peptide isomers of &#181;-conotoxin PIIIA in a targeted way. The peptides are prepared by Fmoc-based solid phase peptide synthesis using a protecting group strategy for defined disulfide bond formation. The respective pairs of cysteines are protected with trityl (Trt), acetamidomethyl (Acm), and tert-butyl (tBu) protecting groups to make sure that during every oxidation step only the required cysteines are deprotected and linked. In addition to the targeted synthesis, a combination of several analytical methods is used to clarify the correct folding and generation of the desired peptide structures. The comparison of the different 3-disulfide-bonded isomers indicates the importance of accurate determination and knowledge of the disulfide connectivity for the calculation of the three-dimensional structure and for interpretation of the biological activity of the peptide isomers. The analytical characterization includes the exact disulfide bond elucidation via tandem mass spectrometry (MS/MS) analysis which is performed with partially reduced and alkylated derivatives of the intact peptide isomer produced by an adapted protocol. Furthermore, the peptide structures are determined using 2D nuclear magnetic resonance (NMR) experiments and the knowledge obtained from MS/MS analysis.

Cysteine-rich peptides fold into distinct three-dimensional structures depending on their disulfide connectivity. Targeted synthesis of individual disulfide isomers is required when buffer oxidation does not lead to the desired disulfide connectivity. The protocol deals with the selective synthesis of 3-disulfide-bonded peptides and their structural analysis using NMR and MS/MS studies.

Peptides with a high number of cysteines are usually influenced regarding the three-dimensional structure by their disulfide connectivity. It is thus ...

Solid-phase Synthesis of [4.4] Spirocyclic Oximes

A convenient synthetic route for spirocyclic heterocycles is well sought after due to the molecule&#39;s potential use in biological systems. By means of solid-phase synthesis, regenerating Michael (REM) linker strategies, and 1,3-dipolar cycloaddition, a library of structurally similar heterocycles, both with and without a spirocyclic center, can be constructed. The main advantages of the solid-support synthesis are as follows: first, each reaction step can be driven to completion using a large excess of reagents resulting in high yields; next, the use of commercially available starting materials and reagents keep the costs low; finally, the reaction steps are easy to purify via simple filtration. The REM linker strategy is attractive because of its recyclability and traceless nature. Once a reaction scheme is completed, the linker can be reused multiple times. In a typical solid-phase synthesis, the product contains either a part of or the whole linker, which can prove undesirable. The REM linker is &#34;traceless&#34; and the point of attachment between the product and the polymer is indistinguishable. The high diastereoselectivity of the intramolecular 1,3-dipolar cycloaddition is well documented. Limited by the insolubility of the solid support, the reaction progression can only be monitored by a change in the functional groups (if any) via infrared (IR) spectroscopy. Thus, the structural identification of intermediates cannot be characterized by conventional nuclear magnetic resonance (NMR) spectroscopy. Other limitations to this method stem from the compatibilities of the polymer/linker to the desired chemical reaction scheme. Herein we report a protocol that allows for the convenient production of spirocyclic heterocycles that, with simple modifications, can be automated with high-throughput techniques.

Here we present a protocol to demonstrate an efficient method for the synthesis of spirocyclic heterocycles. The five-step process utilizes solid-phase synthesis and regenerating Michael linker strategies. Generally difficult to synthesize, we present a customizable method for the synthesis of spirocyclic molecules otherwise inaccessible to other modern approaches.

A convenient synthetic route for spirocyclic heterocycles is well sought after due to the molecule&#39;s potential use in biological systems. By means of ...

Synthesis of Esters Via a Greener Steglich Esterification in Acetonitrile

The Steglich esterification is a widely-used reaction for the synthesis of esters from carboxylic acids and alcohols. While efficient and mild, the reaction is commonly performed using chlorinated or amide solvent systems, which are hazardous to human health and the environment. Our methodology utilizes acetonitrile as a greener and less hazardous solvent system. This protocol exhibits rates and yields that are comparable to traditional solvent systems and employs an extraction and wash sequence that eliminates the need for the purification of the ester product via column chromatography. This general method can be used to couple a variety of carboxylic acids with 1&#176; and 2&#176; aliphatic alcohols, benzylic and allylic alcohols, and phenols to obtain pure esters in high yields. The goal of the protocol detailed here is to provide a greener alternative to a common esterification reaction, which could serve useful for ester synthesis in both academic and industrial applications.

A modified Steglich esterification reaction was used to synthesize a small library of ester derivatives with primary and secondary alcohols. The methodology uses a non-halogenated and greener solvent, acetonitrile, and enables product isolation in high yields without the need for chromatographic purification.

The Steglich esterification is a widely-used reaction for the synthesis of esters from carboxylic acids and alcohols. While efficient and mild, the ...

Synthesis Method for Cellulose Nanofiber Biotemplated Palladium Composite Aerogels

Here, a method to synthesize cellulose nanofiber biotemplated palladium composite aerogels is presented. Noble metal aerogel synthesis methods often result in fragile aerogels with poor shape control. The use of carboxymethylated cellulose nanofibers (CNFs) to form a covalently bonded hydrogel allows for the reduction of metal ions such as palladium on the CNFs with control over both nanostructure and macroscopic aerogel monolith shape after supercritical drying. Crosslinking the carboxymethylated cellulose nanofibers is achieved using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) in the presence of ethylenediamine. The CNF hydrogels maintain their shape throughout synthesis steps including covalent crosslinking, equilibration with precursor ions, metal reduction with high concentration reducing agent, rinsing in water, ethanol solvent exchange, and CO2 supercritical drying. Varying the precursor palladium ion concentration allows for control over the metal content in the final aerogel composite through a direct ion chemical reduction rather than relying on the relatively slow coalescence of pre-formed nanoparticles used in other sol-gel techniques. With diffusion as the basis to introduce and remove chemical species into and out of the hydrogel, this method is suitable for smaller bulk geometries and thin films. Characterization of the cellulose nanofiber-palladium composite aerogels with scanning electron microscopy, X-ray diffractometry, thermal gravimetric analysis, nitrogen gas adsorption, electrochemical impedance spectroscopy, and cyclic voltammetry indicates a high surface area, metallized palladium porous structure.

A synthesis method for cellulose nanofiber biotemplated palladium composite aerogels is presented.The resulting composite aerogel materials offer potential for catalysis, sensing, and hydrogen gas storage applications.

Here, a method to synthesize cellulose nanofiber biotemplated palladium composite aerogels is presented. Noble metal aerogel synthesis methods often ...