All
Research
Education
Исследования
Образование
Business
Решения
RU
EN - English
CN - 中文
DE - Deutsch
ES - Español
KR - 한국어
IT - Italiano
FR - Français
PT - Português
TR - Türkçe
JA - 日本語
PL - Polski
RU - Русский
HE - עִברִית
AR - العربية
Войдите в систему
Chapter 20
Pure bending occurs when a prismatic member possesses a plane of symmetry and experiences couples of equal magnitudes acting within that plane. This type ...
Consider a prismatic member subjected to two couples, equal in magnitude but in opposite directions, acting within the symmetric plane of the member. A ...
Consider the deformations of a symmetric prismatic member subjected to equal and opposite couples. As the member bends uniformly, the lines on the wider ...
Consider a bending moment where a symmetric member endures stress within the elastic limit. The longitudinal stress can be expressed using Hooke's ...
When a material is subjected to uniaxial stress, the material undergoes elongation or contraction in the direction of the applied stress. At the same ...
Consider two metallic pipes having an inner radii of 1.5 cm and 1 cm, respectively, and an outer radii of 1.8 cm. If both pipes can withstand a maximum ...
Consider a member of two different materials that have the same cross-sectional area. The equation of stress for such a member is expressed in terms of ...
The equation for stress for a member under pure bending having a plane of symmetry and a uniform cross-section assumes that the stress is evenly ...
For pure bending, when maximum stress exceeds the yield strength of the member's material, it undergoes plastic deformation. The strain at any point ...
Consider a member made up of an elastoplastic material with a rectangular cross-section. Within the elastic limit, the stress distribution across the ...
Consider a member experiencing plastic deformation due to bending and having one plane of symmetry. The stresses are uniformly distributed above and below ...
If a sufficiently large bending moment is applied to an elastoplastic member, plastic zones will develop in the member. Now, if the bending moment is ...
Eccentric axial loading refers to the application of an axial load that is not aligned with the centroidal axis of the member. Consider a member having a ...
Unsymmetric bending occurs when the bending moment is not acting along the plane of the symmetry of the member or if the member does not possess any plane ...
Consider a member with a vertical plane of symmetry subjected to bending couples in a plane at an angle θ with respect to the vertical axis of the ...
Consider a member subjected to equal and opposite eccentric forces. These forces are applied at a horizontal distance of a and a vertical distance of b ...
Consider a curved member having a transverse section symmetric with the y-axis. Its upper and lower surfaces intersect with xy-planes along arcs of ...
For a curved member with a uniform cross-section, the strain equation along the section shows that it varies non-linearly with the distance from the ...
Конфиденциальность
Условия эксплуатации
Политика
СВЯЖИТЕСЬ С НАМИ
РЕКОМЕНДОВАТЬ БИБЛИОТЕКЕ
НОВОСТИ JoVE
JoVE Journal
Подборки методов
JoVE Encyclopedia of Experiments
Архив
JoVE Core
JoVE Science Education
JoVE Lab Manual
JoVE Quiz
JoVE Playlist
АВТОРЫ
Библиотекарь
Доступ
О JoVE
JoVE Sitemap
Авторские права © 2025 MyJoVE Corporation. Все права защищены
