JoVE Journal

Engineering

Author Produced

Masz pełny dostęp do tej treści za pośrednictwem

Nanyang Technological University

Implementation of a Reference Interferometer for Nanodetection

Please note that all translations are automatically generated. Click here for the English version.

9.3K Views

•

16:11 min

•

April 26th, 2014

DOI :

10.3791/51133-v

April 26th, 2014

•

Serge Vincent*¹, Wenyan Yu*¹, Tao Lu¹

¹Department of Electrical and Computer Engineering, University of Victoria

Podsumowanie

A reference interferometer technique, which is designed to remove undesirable laser jitter noise for nanodetection, is utilized for probing an ultra-high quality factor microcavity. Instructions for assembly, setup, and data acquisition are provided, alongside the measurement process for specifying the cavity quality factor.

Przeglądaj więcej filmów

Keywords Reference Interferometer

Fiber Interferometer

Free Spectral Range

Laser Jitter Noise

Polystyrene Nanobeads

Adaptive Curve Fitting

Resonant Wavelength

Split Frequency Shifts

Rozdziały w tym wideo

0:00

Title

1:36

Reference Interferometer Construction

3:57

Fiber Pulling

3:01

Free Spectral Range Measurement

6:46

Preparation and Delivery of Solutions

12:43

System Configuration and Interconnections

14:45

Post-processing of Data

14:06

Nanoparticle Detection

15:32

Conclusion

Powiązane Filmy

article

Analysis of Contact Interfaces for Single GaN Nanowire Devices

9.3K Views

article

Preparation and Use of Photocatalytically Active Segmented Ag|ZnO and Coaxial TiO₂-Ag Nanowires Made by Templated Electrodeposition

21.7K Views

article

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles

11.7K Views

article

Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores

28.0K Views

article

Fabrication Process of Silicone-based Dielectric Elastomer Actuators

33.4K Views

article

Advanced Experimental Methods for Low-temperature Magnetotransport Measurement of Novel Materials

10.5K Views

article

Spark Plasma Sintering Apparatus Used for the Formation of Strontium Titanate Bicrystals

9.8K Views

article

Standardized Method for Measuring Collection Efficiency from Wipe-sampling of Trace Explosives

9.4K Views

article

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method

8.2K Views

article

Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics

7.4K Views

Copyright © 2025 MyJoVE Corporation. Wszelkie prawa zastrzeżone

Używamy plików cookie, aby ulepszyć Twoje wrażenia z korzystania z naszej witryny.

Kontynuując korzystanie z naszej witryny lub klikając „Kontynuuj”, wyrażasz zgodę na akceptację naszych plików cookie.

Dowiedz się więcej