JoVE Journal

Engineering

Masz pełny dostęp do tej treści za pośrednictwem

Nanyang Technological University

Fabrication of Refractive-index-matched Devices for Biomedical Microfluidics

This protocol describes the fabrication of microfluidic devices from MY133-V2000 to eliminate artifacts that often arise in microchannels due to the mismatching refractive indices between microchannel structures and an aqueous solution. This protocol uses an acrylic holder to compress the encapsulated device, improving adhesion both chemically and mechanically.

Rozdziały w tym wideo

0:04

Title

0:45

Fabrication of the MY133 Microchannel

6:50

Testing and Use of the MY133-V2000 Device

7:57

Results: Few if any Artifacts are Observed Near the Microchannel-solution Interface with or without Cells in Close Proximity to the Channel Wall

8:45

Conclusion

Powiązane Filmy

Używamy plików cookie, aby ulepszyć Twoje wrażenia z korzystania z naszej witryny.

Kontynuując korzystanie z naszej witryny lub klikając „Kontynuuj”, wyrażasz zgodę na akceptację naszych plików cookie.