Dr. Kerwyn Casey Huang, Dr. Andr&#233;s Aranda-D&#237;az, Ted Cooper, and members of the Ludington lab gave valuable input on the development of this protocol. Funding was provided by NSF IOS grant 2032985, NIH grant DP5OD017851, a Carnegie Institution of Canada grant, and the Carnegie Institute for Science&#39;s Endowment.

1. Fly colonization
NOTE: This method is suitable for quantitative analysis of flies with a culturable gut microbiome by growth plating of CFUs. A detailed protocol for rearing gnotobiotic flies has been previously published12.
<ol>
	<li>Establish stable colonization by a commensal bacterial species.
	<ol>
		<li>Prepare a fresh bacterial culture, pellet by centrifugation at 400 x g for 3 min at room temperature, and resuspend the cell pellet in PBS to an OD600 of 1.0. For this protocol, Lactiplantibacillus plantarum (previously known as Lactobacillus plantarum) was grown overnight to an OD600 of 2.0.</li>
		<li>Pipette 100 &#181;L onto the food in a fly vial (see Table of Materials). Spread evenly and allow the liquid to absorb for 15-30 min.</li>
		<li>Transfer 20 germ-free flies into this vial using the standard vial to vial flipping technique34. Each fly will eat a roughly equal quantity of the bacterial dose35. Alternatively, germ-free eggs can be added.</li>
		<li>Transfer the flies to fresh sterile food daily for 3 days. Do all this in a biosafety cabinet and use sterile technique (Figure 1A-1).</li>
	</ol>
	</li>
	<li>Prior to measuring CFU load, transfer the flies to a vial containing sterile agar-water for 4 h to clear transient bacteria from the gut. The agar-water vials provide a source of moisture for the fly but no nutrition for the fly or bacteria on the surface. They are prepared in the same sterile fly vials as with standard food but contain only deionized water and 1.5% agar.</li>
</ol>
2. Homogenizing flies individually in a 96-well PCR plate
<ol>
	<li>Prepare bead beater plates in advance.
	<ol>
		<li>Pour 0.5 &#181;m glass beads (see Table of Materials) onto the bead measuring tray (3D printed with the help of Supplemental Coding File 1 S1-bead-measurer.stl). Spread the beads on the tray so that all the wells are full and level, and then brush off excess beads into a conical tube to recover them.</li>
		<li>Place a semi-skirted PCR plate (see Table of Materials) upside down on the measuring tray and align it with the wells by fitting it into the indentation on the measuring tray. Then, quickly flip it over to transfer the beads.</li>
		<li>Remove excess beads from the PCR plate surface and cover it with foil. Inspect the PCR plate to ensure that all the wells contain beads. Use a weigh scoop if required to add beads to a single well. If static electricity is causing beads to stick on the plate surfaces, wipe or spray the back of the measuring tray and PCR plate with 70% ethanol.</li>
		<li>Cover with aluminum foil. Many plates can be prepared in this way and then autoclaved and stored for later use. When ready for use, add 100 &#181;L of PBS to each well using the 96-channel pipettor (see Table of Materials).</li>
	</ol>
	</li>
	<li>Surface-sterilize the microbe-colonized flies (see step 1) with 70% ethanol before homogenization.
	<ol>
		<li>Anesthetize the flies with 100% CO2 for 5 s. Transfer anesthetized flies from the vial into a 1.5 mL microcentrifuge tube using a small funnel (Figure 1A-2). In this study, 25 flies were typically added per tube.</li>
		<li>Immediately spray ~1 mL of 70% ethanol into the tube, close the tube and mix by inversion for 10 s. Then, aspirate the ethanol with a P1000 pipette, being careful not to aspirate any flies. Repeat once again with ethanol, then twice with sterile PBS (Figure 1A-3).</li>
	</ol>
	</li>
	<li>After the final PBS wash, close the tube and, with the cap side down, tap it hard a few times on the bench so the flies go into the cap.</li>
	<li>Open the tube and dispense flies into the wells using forceps (Figure 1A-4). Place one fly in each well (Figure 1A-5). Keep the plate on ice while loading to keep the flies anesthetized.</li>
	<li>Seal the plate using Thermal Bond heat sealing foil (see Table of Materials).
	<ol>
		<li>First, remove any stray beads that are close to the wells as these can cause leakage in the foil seal. Make sure the dull side of the foil is oriented down on the plate and the shiny side up toward the heat sealer. Press the heat sealer (see Table of Materials) down firmly for 5 s (Figure 1A-6). Burnish with the hand applicator (see Table of Materials) to secure the foil. 
		NOTE: Poor sealing is a cause of sample loss.</li>
	</ol>
	</li>
	<li>Secure the plate in the plate shaker. Homogenize for 5 min (Figure 1A-7). Spin down the bead plate for 30 s in a mini-plate spinner (see Table of Materials) at 350 x g to remove liquid from the sealing foil.</li>
	<li>Remove the foil while holding the plate so as not to splash droplets of fly homogenate out of the wells.</li>
</ol>
3. Serial dilution of fly homogenate and spotting onto CFU plates
<ol>
	<li>Place four rectangular MRS agar growth plates (see Table of Materials) in the biosafety cabinet and remove their lids. In this protocol, MRS agar was used for the growth of L. plantarum.&#160;Leave these plates to dry for at least 10 min (20 min if they are freshly poured or cold from storage). 
	NOTE: If the plates are wet, the droplets from the 96-well plate will run together and ruin the counts.</li>
	<li>Prepare three dilution plates by adding 100 &#181;L of PBS to each well of a sterile 96-well plate using a 96-channel pipettor. Load a rack of P20 tips onto the 96-channel pipettor.</li>
	<li>Make a 1:10 dilution by aspirating 11.1 &#181;L of homogenate from the sample plate prepared in section 2 (Figure 1A-8). Be sure to draw from the middle of the wells rather than the bottom of the wells because the fly homogenate and glass beads will clog the pipettes. The beads sink, and the fly particulates float, leaving the middle layer mostly clear.</li>
	<li>Dispense the 11.1 &#181;L into the first dilution plate, which already contains 100 &#181;L of sterile PBS per well. Keep the dilution plate on the plate shaker for 10 s at 600 rpm. Mix again by pipetting up and down for five cycles. Transfer 11.1 &#181;L from the first dilution plate to the second dilution plate, and repeat the mixing steps for the next two dilution plates.</li>
	<li>Perform dilution series plating as described below.
	<ol>
		<li>Retrieve the growth plates from the biosafety cabinet.</li>
		<li>Starting with the most dilute plate, spot 2 &#181;L from each well onto the agar plates using the 96-well pipettor (Figure 1A-9).
		<ol>
			<li>Lower the pipettor head slowly onto the plate, taking care not to stab into the agar. Examine the plate carefully and ensure all the spots have been dispensed; if not, manually add 2 &#181;L to the appropriate position. Check that the liquid spots quickly soak into the agar and do not run together.</li>
			<li>If the spots run together, dry a new set of fresh agar plates for a longer period and redo the spotting. If there are multiple plate types (e.g., different media or with antibiotics), spot those too. Dispense any remaining solution back into the dilution plate and proceed to the next higher concentration. 
			NOTE: When spotting dilutions, mix the next dilution five times to ensure that the contents of the pipette tips are cleared of the previous dilution. The dilution plates can be stored &#62;8 h at 4 &#176;C without affecting the colony counts35.</li>
		</ol>
		</li>
	</ol>
	</li>
	<li>Repeat the plating process as described in step 3.5 for the remaining dilution plates, progressing from most dilute to most concentrated until the plate with the original homogenate.</li>
	<li>When all the liquid has been absorbed into the agar, invert the plates and place them in the incubator (Figure 1A-10). For Lactiplantibacillus and Acetobacter from Drosophila, the optimal temperature is 30 &#176;C on MRS media. Incubate until the colonies have reached optimal size: colonies are large enough to clearly see them but not so large that they merge or interfere with one another&#39;s growth (see the representative results for quantification of the optimal size). 
	NOTE: Optimal growth conditions are strain-dependent and must be determined empirically. For Lactiplantibacillus from Drosophila, the optimal time of incubation is 26 h to 30 h on MRS agar. For Acetobacter from Drosophila, the optimal time of incubation is 30 h to 48 h on MRS depending on the strain.</li>
	<li>After incubation, store the plates at 4 &#176;C if required until ready for counting.</li>
</ol>
4. Quantification of CFUs
<ol>
	<li>Quantify CFUs by photographing the plates and then counting the colonies using automated software, as detailed below. If the plates were stored at 4 &#176;C, first allow them to reach room temperature so there is no condensation on the plates, which produces glare.</li>
	<li>Organize the plates in a logical sequence and keep them in that order while photographing &#8212; it makes it easier to name the files. Orient all the plates so that A1 is in the upper left corner for all the plates. It is recommended to label the A1 corner with a unique ID to ensure no mix up of the photos. Stack each dilution series in order.</li>
	<li>Remove the plate lid and place the plate on the stage with A1 oriented in the correct corner. Designs are included for the plate photo box (Supplemental File 1, Supplemental File 2), which is optimized for photographing these tray plates and includes lighting and filter options to image fluorescent colonies.</li>
	<li>Image the plates. Use the camera (see Table of Materials) with manual settings to achieve a consistent exposure level between plates. A long focal length setting is recommended to minimize perspective distortion. Capture the photo using a remote shutter to minimize blur from camera shake.</li>
	<li>Transfer the images to a computer and rename them, including the experiment name, the type of media, the dilution factor, and any other pertinent details. Some operating systems (see Table of Materials) have a useful batch renaming feature in Finder by right-clicking on a selection of files.</li>
</ol>
5. Automated colony counting using the Count-On-It suite (Supplemental File 3)
<ol>
	<li>Crop the images using the provided Croptacular plugin (Supplemental Coding File 2) for ImageJ. This plugin helps to divide the image into an orderly array of subregions (e.g., 8 x 12 for a 96-well plate). The subregions will be counted individually. 
	NOTE: A separate plugin for counting circular plates called Circus is described in the Supplemental Coding File 3 Circus_.ijm.
	<ol>
		<li>Organize the images to be processed for quantification into a folder. Choose filenames that distinguish the plates, as these filenames become column titles for each set of counts . Within this folder, make subfolders named &#34;cropped&#34; and &#34;receipts&#34; .</li>
		<li>Launch Croptacular,&#160;and click OK to start cropping. 
		NOTE:The default settings are displayed and are usually sufficient. Depending on the resolution of the image, the lighting, the spot size, etc., it can be helpful to adjust the base parameters.</li>
		<li>If the image is already straight, simply press Space. Otherwise, straighten the image by drawing a line along an edge that should become horizontal. Redraw the line as many times as needed if the image still does not appear straightened.</li>
		<li>Next, draw a boundary box of the area for which counting is to be done. Adjust the size and proportion until all the spots are within their cells. Drag the cursor outside the boundary box to refresh the grid. When the grid looks good, press Space.</li>
		<li>Ensure that the next image automatically rotates to the same angle as the first one; the plugin assumes all the photos are aligned the same. If this is accurate, press Space to continue. Otherwise, straighten the image as before. The grid also recalls the same position as the previous image; adjust if necessary, and then press Space.</li>
	</ol>
	</li>
	<li>Enumerate the colonies on the plates using the provided Count-On-It: Gridiron plugin for ImageJ (Supplemental Coding File 4). Detailed instructions for installing and using the plugin are included in Supplemental File 3.
	<ol>
		<li>Launch Count-On-It &#62; Gridiron. Use the same grid settings as with Croptacular. Users can batch an entire folder, analyze a single image, or start from the current image.</li>
		<li>Set the threshold based on an upper and a lower pixel intensity value. Make the threshold as stringent as possible while still selecting all the colonies. Ideally, there will be some space between the selected colonies, but the software is capable of segmenting the blobs to a degree. Click OK on the &#34;Action Required&#34; dialogue box when the threshold is satisfactory .</li>
		<li>To inspect the results, zoom in and look more closely at the colony counts. Clicking cancel will abort the plugin. Click OK to continue.</li>
		<li>On the first image, ensure that the option is given to proceed or return to the setup menu, for example, to change the minimum colony size. To proceed with the batch process, click OK. Then, select a folder to keep the receipts and results table. Use the &#34;receipts&#34; folder or create a new folder.</li>
		<li>After the first image, the next images will default to the same threshold as the previous settings. Click OK to use these settings or adjust the settings. If the photos are consistent and the setting is accurate, Click OK on the &#34;Action Required&#34; dialogue box. 
		NOTE: Once all the images in the batch are completed, the results table saves automatically in the same folder as the receipts.</li>
		<li>Review the count receipts that are produced by the software and manually correct any counting errors. The ImageJ plug-in is statistically accurate, but errors do occur. Proof the receipts to examine outliers and identify miscounts. The software saves the CFU data as a .csv file in the same folder as the receipts.</li>
	</ol>
	</li>
	<li>Analyze the data using the user-preferred software.</li>
</ol>

<ol>
	<li>McFall-Ngai, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Animals+in+a+bacterial+world,+a+new+imperative+for+the+life+sciences.">Animals in a bacterial world, a new imperative for the life sciences.</a> Proceedings of the National Academy of Sciences. 110 (9), 3229-3236 (2013).</li><li>Shepherd, E. S., Deloache, W. C., Pruss, K. M., Whitaker, W. R., Sonnenburg, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+exclusive+metabolic+niche+enables+strain+engraftment+in+the+gut+microbiota.">An exclusive metabolic niche enables strain engraftment in the gut microbiota.</a> Nature. 557 (7705), 434-438 (2018).</li><li>Taur, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intestinal+domination+and+the+risk+of+bacteremia+in+patients+undergoing+allogeneic+hematopoietic+stem+cell+transplantation.">Intestinal domination and the risk of bacteremia in patients undergoing allogeneic hematopoietic stem cell transplantation.</a> Clinical Infectious Diseases. 55 (7), 905-914 (2012).</li><li>Buffie, C. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Precision+microbiome+reconstitution+restores+bile+acid+mediated+resistance+to+Clostridium+difficile.">Precision microbiome reconstitution restores bile acid mediated resistance to Clostridium difficile.</a> Nature. 517 (7533), 205-208 (2015).</li><li>Callahan, B. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DADA2:+High-resolution+sample+inference+from+Illumina+amplicon+data.">DADA2: High-resolution sample inference from Illumina amplicon data.</a> Nature Methods. 13 (7), 581-583 (2016).</li><li>Vandeputte, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Temporal+variability+in+quantitative+human+gut+microbiome+profiles+and+implications+for+clinical+research.">Temporal variability in quantitative human gut microbiome profiles and implications for clinical research.</a> Nature Communications. 12 (1), 6740 (2021).</li><li>D'hoe, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrated+culturing,+modeling+and+transcriptomics+uncovers+complex+interactions+and+emergent+behavior+in+a+three-species+synthetic+gut+community.">Integrated culturing, modeling and transcriptomics uncovers complex interactions and emergent behavior in a three-species synthetic gut community.</a> eLife. 7, 2892 (2018).</li><li>Ludington, W. B., Ja, W. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Drosophila+as+a+model+for+the+gut+microbiome.">Drosophila as a model for the gut microbiome.</a> PLoS Pathogens. 16 (4), 1008398 (2020).</li><li>Chandler, J. A., Lang, J. M., Bhatnagar, S., Eisen, J. A., Kopp, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bacterial+communities+of+diverse+Drosophila+species:+Ecological+context+of+a+host-microbe+model+system.">Bacterial communities of diverse Drosophila species: Ecological context of a host-microbe model system.</a> PLoS Genetics. 7 (9), 1002272 (2011).</li><li>Pais, I. S., Valente, R. S., Sporniak, M., Teixeira, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Drosophila+melanogaster+establishes+a+species-specific+mutualistic+interaction+with+stable+gut-colonizing+bacteria.">Drosophila melanogaster establishes a species-specific mutualistic interaction with stable gut-colonizing bacteria.</a> PLoS Biology. 16 (7), 2005710 (2018).</li><li>Adair, K. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Host+determinants+of+among-species+variation+in+microbiome+composition+in+drosophilid+flies.">Host determinants of among-species variation in microbiome composition in drosophilid flies.</a> The ISME Journal. 14, 217-229 (2019).</li><li>Koyle, M. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rearing+the+fruit+fly+Drosophila+melanogaster+under+axenic+and+gnotobiotic+conditions.">Rearing the fruit fly Drosophila melanogaster under axenic and gnotobiotic conditions.</a> Journal of Visualized Experiments. (113), e54219 (2016).</li><li>Lesperance, D. N. A., Broderick, N. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microbiomes+as+modulators+of+Drosophila+melanogaster+homeostasis+and+disease.">Microbiomes as modulators of Drosophila melanogaster homeostasis and disease.</a> Current Opinion in Insect Science. 39, 84-90 (2020).</li><li>Grenier, T., Leulier, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=How+commensal+microbes+shape+the+physiology+of+Drosophila+melanogaster.">How commensal microbes shape the physiology of Drosophila melanogaster.</a> Current Opinion in Insect Science. 41, 92-99 (2020).</li><li>Broderick, N. A., Lemaitre, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gut-associated+microbes+of+Drosophila+melanogaster.">Gut-associated microbes of Drosophila melanogaster.</a> Gut Microbes. 3 (4), 307-321 (2012).</li><li>Tkacz, A., Hortala, M., Poole, P. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Absolute+quantitation+of+microbiota+abundance+in+environmental+samples.">Absolute quantitation of microbiota abundance in environmental samples.</a> Microbiome. 6 (1), 110 (2018).</li><li>T&#233;fit, M. A., Gillet, B., Joncour, P., Hughes, S., Leulier, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stable+association+of+a+Drosophila-derived+microbiota+with+its+animal+partner+and+the+nutritional+environment+throughout+a+fly+population's+life+cycle.">Stable association of a Drosophila-derived microbiota with its animal partner and the nutritional environment throughout a fly population's life cycle.</a> Journal of Insect Physiology. 106, 2-12 (2017).</li><li>Ryu, J. -. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Innate+immune+homeostasis+by+the+homeobox+gene+caudal+and+commensal-gut+mutualism+in+Drosophila.">Innate immune homeostasis by the homeobox gene caudal and commensal-gut mutualism in Drosophila.</a> Science. 319 (5864), 777-782 (2008).</li><li>Sieuwerts, S., De Bok, F. A. M., Mols, E., De Vos, W. M., Van Hylckama Vlieg, J. E. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+simple+and+fast+method+for+determining+colony+forming+units.">A simple and fast method for determining colony forming units.</a> Letters in Applied Microbiology. 47 (4), 275-278 (2008).</li><li>Eckburg, P. B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diversity+of+the+human+intestinal+microbial+flora.">Diversity of the human intestinal microbial flora.</a> Science. 308 (5728), 1635-1638 (2005).</li><li>Newell, P. D., Douglas, A. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Interspecies+interactions+determine+the+impact+of+the+gut+microbiota+on+nutrient+allocation+in+Drosophila+melanogaster.">Interspecies interactions determine the impact of the gut microbiota on nutrient allocation in Drosophila melanogaster.</a> Applied and Environmental Microbiology. 80 (2), 788-796 (2013).</li><li>Costello, E. K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bacterial+community+variation+in+human+body+habitats+across+space+and+time.">Bacterial community variation in human body habitats across space and time.</a> Science. 326 (5960), 1694-1697 (2009).</li><li>Fadrosh, D. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+improved+dual-indexing+approach+for+multiplexed+16S+rRNA+gene+sequencing+on+the+Illumina+MiSeq+platform.">An improved dual-indexing approach for multiplexed 16S rRNA gene sequencing on the Illumina MiSeq platform.</a> Microbiome. 2 (1), 6 (2014).</li><li>Vega, N. M., Ludington, W. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+a+parts+list+to+assembly+instructions+and+an+operating+manual:+How+small+host+models+can+re-write+microbiome+theory.">From a parts list to assembly instructions and an operating manual: How small host models can re-write microbiome theory.</a> Current Opinion in Microbiology. 64, 146-151 (2021).</li><li>Samuel, B. S., Rowedder, H., Braendle, C., F&#233;lix, M. -. A., Ruvkun, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Caenorhabditis+elegans+responses+to+bacteria+from+its+natural+habitats.">Caenorhabditis elegans responses to bacteria from its natural habitats.</a> Proceedings of the National Academy of Sciences of the United States of America. 113 (27), 3941-3949 (2016).</li><li>Berg, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assembly+of+the+Caenorhabditis+elegans+gut+microbiota+from+diverse+soil+microbial+environments.">Assembly of the Caenorhabditis elegans gut microbiota from diverse soil microbial environments.</a> The ISME Journal. 10, 1998-2009 (2016).</li><li>Sundarraman, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Higher-order+interactions+dampen+pairwise+competition+in+the+zebrafish+gut+microbiome.">Higher-order interactions dampen pairwise competition in the zebrafish gut microbiome.</a> mBio. 11 (5), 1-15 (2020).</li><li>Douglas, A. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simple+animal+models+for+microbiome+research.">Simple animal models for microbiome research.</a> Nature Reviews Microbiology. 17, 764-775 (2019).</li><li>Friedman, J., Higgins, L. M., Gore, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Community+structure+follows+simple+assembly+rules+in+microbial+microcosms.">Community structure follows simple assembly rules in microbial microcosms.</a> Nature Ecology &amp; Evolution. 1, 0109 (2017).</li><li>Gilchrist, J. E., Campbell, J. E., Donnelly, C. B., Peeler, J. T., Delaney, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spiral+plate+method+for+bacterial+determination.">Spiral plate method for bacterial determination.</a> Applied Microbiology. 25 (2), 244-252 (1973).</li><li>Thomas, P., Sekhar, A. C., Upreti, R., Mujawar, M. M., Pasha, S. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimization+of+single+plate-serial+dilution+spotting+(SP-SDS)+with+sample+anchoring+as+an+assured+method+for+bacterial+and+yeast+cfu+enumeration+and+single+colony+isolation+from+diverse+samples.">Optimization of single plate-serial dilution spotting (SP-SDS) with sample anchoring as an assured method for bacterial and yeast cfu enumeration and single colony isolation from diverse samples.</a> Biotechnology Reports. 8, 45-55 (2015).</li><li>Nu&#241;ez, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Low+cost+and+open+source+multi-fluorescence+imaging+system+for+teaching+and+research+in+biology+and+bioengineering.">Low cost and open source multi-fluorescence imaging system for teaching and research in biology and bioengineering.</a> PLoS One. 12 (11), 0187163 (2017).</li><li>Putman, M., Burton, R., Nahm, M. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simplified+method+to+automatically+count+bacterial+colony+forming+unit.">Simplified method to automatically count bacterial colony forming unit.</a> Journal of Immunological Methods. 302 (1-2), 99-102 (2005).</li><li>Ashburner, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Drosophila. A Laboratory Handbook. , (1989).</li><li>Dodge, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+gut+commensal+niche+regulates+stable+association+of+a+multispecies+microbiota.">A gut commensal niche regulates stable association of a multispecies microbiota.</a> bioRxiv. , (2021).</li><li>Obadia, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Probabilistic+invasion+underlies+natural+gut+microbiome+stability.">Probabilistic invasion underlies natural gut microbiome stability.</a> Current Biology. 27 (13), 1999-2006 (2017).</li><li>Vega, N. M., Gore, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stochastic+assembly+produces+heterogeneous+communities+in+the+Caenorhabditis+elegans+intestine.">Stochastic assembly produces heterogeneous communities in the Caenorhabditis elegans intestine.</a> PLoS Biology. 15 (3), 2000633 (2017).</li><li>Jaime, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+high-throughput+WAFFL+system+for+treating+and+monitoring+individual+Drosophila+melanogaster+adults.">The high-throughput WAFFL system for treating and monitoring individual Drosophila melanogaster adults.</a> bioRxiv. , (2018).</li><li>Ren, C., Webster, P., Finkel, S. E., Tower, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Increased+internal+and+external+bacterial+load+during+Drosophila+aging+without+life-span+trade-off.">Increased internal and external bacterial load during Drosophila aging without life-span trade-off.</a> Cell Metabolism. 6 (2), 144-152 (2007).</li></ol>

The authors have nothing to disclose.

The detailed techniques presented here enable a &#62;100-fold increase in the number of samples that can be evaluated in a CFU counting experiment. This technique advances existing methods for microbiome experiments in Drosophila12,35,36 by using the 96-well plate format to assay individual flies. Furthermore, it applies a more efficient spot plating method19,31 and an automated workflow with a photography and colony counting platform. The significance of this method for Drosophila is to standardize experiments to the 96-well plate format, which enables the simultaneous handling of a large number of biological replicates with automation to achieve high-throughput quantification of CFUs.
The 96-well platform shows that increased frequency of transfer and the &#34;clearing&#34; of transient bacteria causes a significant reduction in both the mean abundance and the variation between samples (Figure 1B,C), demonstrating the stringency of this improved protocol. One limitation of co-housing flies is the horizontal transfer of bacteria between flies. A proposed solution is to keep flies individually in a 96-well plate format, such as the Whole Animal Feeding Flat38.
Although a significant reduction in bacterial load was not observed when flies were washed in ethanol, these flies had only been kept in the presence of external bacteria for 3 days. Housing for longer time periods could allow a greater bacterial load to accumulate39. Therefore, washing in ethanol is still recommended.
Transferring flies into the 96-well plate is the critical first step for setting up the workflow (Figure 1A). Once the flies are washed, they are distributed into the wells one at a time. A plate chart is useful at this stage to note which conditions are present in each well and add any notes such as &#34;fly was lost&#34;. Homogenization is another critical step with some important caveats. Bacteria survive the homogenization process when in the presence of a fly (Figure 1D,E), and presumably, this principle is also true when the bacteria are inside the fly&#39;s gut. However, bacteria are also killed when they are homogenized in bead beater plates alone, demonstrating that the homogenization can kill the bacterial cells in certain circumstances, a limitation which may be important if one is homogenizing dissected guts, for example. Notably, the loss of CFUs when homogenizing is dependent on the number of CFUs in the sample, and the loss is minimal when ~105 CFUs per well are used. Further preservation of CFUs can be achieved by stopping homogenization halfway through and cooling the plate on ice.
Homogenization was performed for 5 min in this protocol based on control experiments where a known number of CFUs were mixed with a germ-free fly, and this worked empirically for fly bacteria. Less beating caused larger fly parts to be present, which interferes with pipetting, while significantly longer homogenization times of ~10 min made CFU counts more variable. The smaller volume and angled shape of conical plate wells were observed to reduce the efficiency of bead beating as compared to cylindrical 2 mL tubes. Many variations on this general approach are possible, including which bacterial strains, which bead beating container, which beads, and which fly genotype are used. Individual user cases need to use positive controls to establish their approach.
The spot plating method was employed in a specific way: 1:2 dilutions of L. plantarum WF in PBS were spotted onto MRS plates and incubated at 30 &#176;C for 2 days (shorter incubation times may be implemented to generate smaller colony sizes). The method requires some up-front investment in equipment, primarily the bead beater and the 96-channel pipettor (Figure 2A), which is necessary for both the dilution series and spot plating. However, less expensive options are available, including a 96-well plate replicator with slotted pins. The dilution series is a critical step that affects the accuracy of the CFU counting results. In terms of failure modes, it is possible to clog the pipette tips with fly parts or glass beads and for the pipette tips to not seal properly onto the pipettor or to fail for some other reason. All these problems result in undercounting of the affected wells and should be monitored. Adequate mixing at each step of the dilution series is also crucial. Each dilution should be mixed thoroughly either by putting the plate on a plate shaker or by pipetting up and down 15-20 times, which also serves to rinse the tips. By spotting from the most dilute to least dilute plate, the tips can be reused for the whole dilution series. With 1:2 dilutions, counting is accurate over a range of 2-25 colonies, spanning an order of magnitude (Figure 2C). Therefore, 1:10 dilutions save time and materials. Another variable that can be taken advantage of is incubation time, which can be adjusted to produce smaller colonies and, thus, increase the range of countable spots by preventing the merging of adjacent colonies.
A quality photo of the plate is essential as it becomes the raw source data from which the CFUs are analyzed and can be archived indefinitely. The FluoroBox is designed to produce photos of the plates with uniform light intensity, which minimizes glare on the agar surface. Additionally, the design is capable of selectively photographing fluorescent colonies using single-color LED lights and colored photo filters (Figure 3A). The construction of a setup like the FluoroBox, with controlled lighting and camera settings, can greatly increase the reproducibility of CFU images, which is important for automated analysis. Colony morphologies, fluorescence intensity, and the effects of time or density on colony growth are just a few of the properties that can be analyzed using the photographs. The photo box can be constructed without the color filters and single-color lights if no fluorescent bacteria are used, reducing the cost and complexity. Different excitation lights and emission filters could be substituted for the ones recommended here if a different fluorophore is used by a lab. A camera that is connected to a tablet over WiFi using an app is useful both for the automated shutter feature to prevent shaking and for ease of data transfer. Images can be transferred to the tablet and then to a laptop using wireless file transfer software. Recommended cameras with these capabilities are indicated in the Table of Materials.
Count-On-It is a plug-in written in ImageJ. The automated CFU counting software segments the plate image into a uniform 96-well grid, counts the colonies in each grid cell, and batches the results into a simple spreadsheet. As there is always variation in the position of the spot grid on the plate and in the photo, the user must manually conform the grid to the photo using the Croptacular plug-in. This also helps exclude areas near the plate edge, which have glare. Setting the threshold is key to getting the most accurate CFU count from the image. If the threshold is set too high, the colonies will merge; if the threshold is set too low, the colonies will be excluded. Once the threshold is set, the macro applies gaussian blur to soften the edges and reduce aliasing, the watershed filter divides overlapping colonies, and the blobs are counted using analyze particles. 
Sometimes, the density of colonies is too high in a particular spot. Count-On-It provides a way to deal with this. To estimate the number of colonies in a grid cell with partially merged colonies, first the average area of a circular blob from the entire plate is taken as Cavg. Then, the area of blob A1 is divided by the average area of a circular blob A1/Cavg. This number is rounded to the nearest integer, and that is the estimate for how many colonies are in a blob. This function is one reason why the threshold can influence the counting results: the relative average colony area versus a merged blob area will be different depending on how the threshold affected merged blobs.
The methods presented have several limitations. These include the need for equipment to dispense liquid media accurately from 96-well plates. This equipment, either a 96-channel pipettor or a slotted replicator pin tool, can cost thousands of dollars to obtain. Cheaper alternatives exist but are less accurate. Automated counting via Count-On-It also presents some limitations. For instance, if two colony types in a mixed population were delimited based on size alone, blob counting would not be able to assign colonies to the correct type. In this case, spots with blobs would need to be eliminated from counts. Further differentiation of colonies based on morphology would be a valuable extension of the method that is not currently implemented. The use of selective media including strain-specific nutrients and antibiotics simplifies the need for complex image analysis.
Maintaining fruit fly&#160;experiments in 96-well plates multiplies the number of samples and conditions that can be tested in a single experiment and can facilitate high-throughput screens in Drosophila-bacteria association phenotypes. We envision that this method can be extended by using selective media to differentiate many bacterial strains in complex mixtures. The method is not limited to the study of the fly microbiome. Quantification of CFUs is common in many applications of microbiology, from coliform counts in drinking water to the identification of pathogens. The CFU plating system presented here enables high-throughput screens, as well as automated acquisition, processing, storage, and delivery of results.

The relationship between intestinal microbiota and their animal host is increasingly at the forefront of biological studies1, which show that the strain composition of the microbiome is important for host physiology2,3,4. The pace of discovery has been limited by confounding factors such as high natural inter-individual variation and high diversity of colonizing bacteria5,6,7. The fruit fly, Drosophila melanogaster, has emerged as a promising model due to its naturally low-diversity microbiome, ease of handling, and robust host genetics8,9,10,11. Flies can be made germ-free and re-associated with a defined microbiota12, and it has been shown that the flora influence fly physiological traits13,14. The innate flora consists of a limited set of bacteria that are all culturable, and close relatives of these are also endogenous to the mammalian gut, including Lactobacilli, Proteobacteria, and Enterococci15.
Studying the influence of the microbiome on host traits requires quantification of the microbiome in terms of both which species are present and their absolute abundances16. The predominant ways of analyzing the fly microbiome are colony forming unit (CFU) counts17, 16S rRNA gene amplicon sequencing9, and qPCR of the 16S rRNA gene18. CFU counts can be obtained without expensive reagents, and they confirm the viability of the bacterial cells19. The 16S techniques including qPCR have advantages in that taxonomic identities of microbes can be ascertained without regard to their growth requirements or colony morphologies20.
In the case where experiments use flies with a defined microbiome of known bacteria (gnotobiotic flies), CFU counts have particular advantages over sequencing21. Sequencing is expensive, requiring DNA extraction, PCR-based library preparation, and high-throughput sequencing to obtain relative abundances22. Due to the high cost, high-throughput sequencing methods typically need to be performed in bulk to reduce the per-sample price23. Further methods such as qPCR are required to obtain absolute abundances16. In contrast, CFU counts are fast and cheap and give the absolute numbers of viable cells. Drosophila8 and other small microbiome models24, including the worm, Caenorhabditis elegans25,26, and the larval zebrafish, Danio rerio, grown gnotobiotically27,&#160;have a limited range of bacteria, which have known growth characteristics28. In these cases, particularly with gnotobiotic animals, CFU counting can differentiate all the species of bacteria within the multispecies gut communities21,27,29. Higher-throughput CFU counting methods would further improve the cost-effectiveness and speed of measuring the composition of the microbiome and could be applied to many other microbiology experiments.
Counting CFUs by serial dilution plating of a bacterial suspension on agar-based growth media is a standard method across the field of microbiology. The colonies that grow on the plates are then counted manually. The dilutions allow the researcher to select a density of colonies that is countable (e.g., ~100 CFUs per plate), meaning the colonies are not growing into one another and can be counted in a reasonable amount of time. Most microbiologists use essentially the same CFU counting method developed 140 years ago in the lab of Robert Koch, and for many applications, this method is still adequate. However, a problem arises when seeking to quantify a large number of samples. A single sample may require plating 1 to 10 serial dilutions of the sample to obtain countable CFUs, so experiments involving more than a few dozen samples become taxing. Various methods have been developed to increase the efficiency of CFU enumeration. Automated spiral plating eliminates the need for serial dilutions30, making only one plate necessary for CFU counting but increasing the time to plate the sample. Single plate-serial dilution spotting (SP-SDS) allows &#65279;CFU estimations from fewer plates per sample31. These methods are an improvement on the traditional spread-plating method but still require handling and plating of bacterial samples singly and are, thus, not ideal for high throughput. Handling samples in 96-well plates and spot plating those 96 samples on rectangular agar plates greatly improves the throughput of samples19.
Microbiomes are typically composed of multiple strains and species. While species can often be distinguished by colony morphology or growth media, fluorescence can be employed to further distinguish different types of bacteria and their growth traits32. For instance, different genotypes of the same species can be labeled with different genetically-encoded fluorescent proteins. Plate imaging methods that incorporate fluorescence allow researchers to take advantage of these genetic techniques in CFU-based assays32. Incorporating fluorescence into high-throughput CFU counting methods would further enhance their utility.
Counting CFUs manually becomes cumbersome when there is a large number of samples. Automated counting of CFUs can be conducted by photographing the plate and processing the image using specialized software33. Sieuwerts et al. combined the improved plating efficiency of spot-plating with automated colony counting using conventional digital photography and ImageJ software19.
A high-throughput method to screen the phenotypes of specific microbe and host associations would aid studies of microbiome community assembly and the impact on host health and fitness. For studies of the Drosophila microbiome, a high-throughput microbiology platform would incorporate handling of fly samples in 96-well plate format, fly lysis without bacterial lysis, the efficiency of spot-plating, the ability to use fluorescence and distinguish multiple fluorophores, a controlled light environment for reproducible imaging of CFU plates, and a reliable automated colony counting software. This article describes a method optimized for the assay of CFUs in gnotobiotic flies, which is simple, fast, and automated. This protocol outlines a novel workflow combining the best of previously published methods and optimized for exploring the gut microbiome in Drosophila.

<table><tbody><tr><td>&lt;strong&gt;Bead beating and spot plating&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>Fly vials</td><td>Genesee</td><td>32-121</td><td>autoclavable</td></tr><tr><td>Fly vial stoppers</td><td>Genesee</td><td>59-201</td><td>autoclavable</td></tr><tr><td>Hand Applicator</td><td>3M</td><td>3M PA1</td><td></td></tr><tr><td>Heat Sealer</td><td>Eppendorf</td><td>5390</td><td></td></tr><tr><td>Mini-Beadbeater 96</td><td>BioSpec</td><td>1001</td><td></td></tr><tr><td>Mini-BeadBeater Glass Mill Beads, 0.5 mm</td><td>BioSpec&amp;nbsp;</td><td>11079105</td><td></td></tr><tr><td>MPS 1000 Mini PCR Plate Spinner</td><td>Labnet</td><td>LI-CF-P1000</td><td></td></tr><tr><td>Rainin BenchSmart 96 semi-automated pipettor</td><td>Mettler Toledo</td><td>30296705</td><td>Less expensive options available, including slotted 96 well pin tool from VP Scientific</td></tr><tr><td>TempPlate semi-skirted 96-well PCR plate, straight skirt, natural</td><td>USA scientific</td><td>1402-9220</td><td>Must be polypropylene for heat sealer</td></tr><tr><td>Thermal Bond Heat Seal Foil</td><td>4titude</td><td>4ti-0591</td><td>Keep sterile</td></tr><tr><td>Tray Plate,128 x 85 mm, Polystyrene, Sterile</td><td>SPL Life Sciences</td><td>31001</td><td>For making rectangular agar plates</td></tr><tr><td>&lt;strong&gt;Photobox construction&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>&amp;frac14;&amp;rdquo;-20 X &amp;frac12;&amp;rdquo; Bolts (X2)</td><td>Amazon</td><td>ASIN: B07BP1WR3H</td><td>To attach the camera bracket. Brand not important. Any 1/4&quot;-20 1/2&quot; bolt works.</td></tr><tr><td>&amp;frac14;&amp;rdquo;-20 x &amp;frac12;&amp;rdquo; Connector Nut&amp;nbsp;</td><td>Amazon</td><td>UPC: 799862376780</td><td>AKA cap nut or connector bolt. This is for attaching the rubber bands on the plate holder. Brand not important.</td></tr><tr><td>&amp;frac14;&amp;rdquo;-20 x &amp;frac34;&amp;rdquo; bolts (X3)</td><td>Amazon</td><td>ASIN: B003QZSZY4</td><td>For the plate holder. Brand not important.</td></tr><tr><td>1/8&amp;rdquo; x &amp;frac12;&amp;rdquo; washer</td><td>Amazon</td><td>UPC: 611982484599</td><td>Washer for the cap nuts on outside of box. Brand not important. Spray paint black before attaching to blend with the acrylic.</td></tr><tr><td>&lt;strong&gt;18 Gauge Wire&lt;/strong&gt; - Two Conductor Power Wire - &lt;strong&gt;18 AWG Power Wire &amp;ndash; 10ft&lt;/strong&gt;</td><td>Superbrightleds.com</td><td>WP18-2</td><td></td></tr><tr><td>22-10 AWG Red Wire Nut - WN-R2210 &amp;ndash; &lt;strong&gt;Quantity 4&lt;/strong&gt;</td><td>Superbrightleds.com</td><td>WN-R2210</td><td></td></tr><tr><td>22-18 AWG 3/16in Female Push On Connector - 22-18 AWG &amp;ndash; &lt;strong&gt;Quantity 3&lt;/strong&gt;</td><td>Superbrightleds.com</td><td>SCFP-2218</td><td></td></tr><tr><td>4&quot; Solderless Clamp-On Jumper Connector - 8mm Single Color LED Strip Lights - &lt;strong&gt;Quantity 3&lt;/strong&gt;</td><td>Superbrightleds.com</td><td>SBL-MA2P-8-2</td><td></td></tr><tr><td>4&quot; Solderless Clamp-On Pigtail Adaptor - 8mm Single Color LED Strip Lights &amp;ndash; &lt;strong&gt;Quantity 3&lt;/strong&gt;</td><td>Superbrightleds.com</td><td>SBL-MA2P-8-1&amp;nbsp;</td><td></td></tr><tr><td>6&amp;rdquo; drawer handle</td><td>Amazon</td><td>ASIN: B07Z331P99</td><td>Any drawer handle should work.</td></tr><tr><td>6&amp;rdquo; Drawer slides</td><td>Btibpse</td><td>UPC: 712243424979</td><td>Trim the soft close rubber stoppers on the drawer sliders.</td></tr><tr><td>8-32 x &amp;frac12;&amp;rdquo; Cap Nuts (x4)</td><td>Amazon</td><td>ASIN: B00HYLZB98</td><td>Attaches drawer slide bolts on outside of box. Brand not important. Nylon won&#039;t damage the acrylic. Spray paint black before attaching to blend with the acrylic.</td></tr><tr><td>8-32 x &amp;frac12;&amp;rdquo; Nylon Bolts (x4)</td><td>Amazon</td><td>ASIN: B07KX9T7NF</td><td>To attach drawer slides. Brand not important. Any bolt or machine screw meeting the specifications works. Nylon won&#039;t damage the acrylic and allows you to cut the bolt flush with the nut. Spray paint black before attaching to blend with the acrylic.</td></tr><tr><td>Acrylic Glue</td><td>SCIGRIP</td><td>Ean: 7844908489337</td><td>SCIGRIP Weld-On #4 Adhesive, Pint and Weld-On Applicator Bottle with Needle</td></tr><tr><td>Black Cable Ties - 10 Pack - 4 Inch Long&amp;nbsp;</td><td>Superbrightleds.com</td><td>CT-B04-10</td><td></td></tr><tr><td>Camera L-Bracket</td><td>WLPREOE, Vikerer, Unbranded</td><td>ASIN: B09X46YKQZ</td><td>The bracket should be &quot;reversed&quot; from its intended configuration so that the camera is on the &quot;outside&quot; of the L. Some brackets come in two pieces and allow for this alternate configuration, some don&#039;t, you&#039;ll need one that can be flipped. Also should have 1/4&quot; holes for attachment. WLPREOE, Vikerer, Unbranded. Amazon Serial Identification Number given as an example.</td></tr><tr><td>Canon T series camera for tethering option OR</td><td>Canon, Panasonic, Sony, Nikon, etc..</td><td>1894C002</td><td>The Canon Ti series cameras are a good option and can tether to a computer. Use with the 18-55mm standard kit lens. Used options are recommended from the Canon T5 to T7 (current model).</td></tr><tr><td>Custom Length Single Color LED Strip Light - Eco Series Tape Light - 24V - IP20 - 250 lm/ft - Blue - 2 meters</td><td>Superbrightleds.com</td><td>STN-BBLU-B6A-08C1M-24V</td><td></td></tr><tr><td>Custom Length Single Color LED Strip Light - Eco Series Tape Light - 24V - IP20 - 250 lm/ft - Green &amp;ndash; 2 meters</td><td>Superbrightleds.com</td><td>STN-BGRE-B6A-08C1M-24V</td><td></td></tr><tr><td>Custom Length Single Color LED Strip Light - Eco Series Tape Light - 24V - IP20 - 250 lm/ft - Natural White 4000K &amp;ndash; 2 meters&amp;nbsp;</td><td>Superbrightleds.com</td><td>STN-A40K80-B6A-08C1M-24V</td><td></td></tr><tr><td>Drill with &amp;frac14;&amp;rdquo;, 1/8&amp;rdquo; drill bits</td><td>Black &amp;amp; Decker</td><td>&amp;lrm;BDCDD12PK</td><td>Brand not important.&amp;nbsp;</td></tr><tr><td>Flat Black Spray Paint,&amp;nbsp; 2X Ultra-Matte</td><td>Rustoleum</td><td>331182</td><td>Paint the interior of everything FLAT black. Brand not important.</td></tr><tr><td>Laser Cut Acrylic Walls</td><td>Big Blue Saw</td><td>www.bigbluesaw.com</td><td>Use the attached PDF, delete all cutouts in the top piece except desired hole for camera&amp;nbsp;</td></tr><tr><td>Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC - 20 Watt&amp;nbsp;</td><td>Superbrightleds.com</td><td>LPV-20-24</td><td></td></tr><tr><td>Panasonic ZS100 for wifi connection to a phone, tablet, or computer</td><td>Canon, Panasonic, Sony, Nikon, etc.</td><td>DMC-ZS100K</td><td>Panasonic cameras can be wirelessly connected to a computer for data transfer and remote shutter options. Used options are good.</td></tr><tr><td>Quick Release Plate</td><td>Neewer Aluminium 50mm Quick Release Plate QR Clamp 3/8-inch with 1/4-inch</td><td>ASIN: B07417F21D</td><td>Add this to the bracket so the camera can be easily removed for changing color filters. Amazon Serial Identification Number given as an example.</td></tr><tr><td>Rubber Bands, Assorted sizes</td><td>BAZIC Products</td><td>Alliance Rubber 26649</td><td>Rubber bands go on the plate holder. Brand not important.</td></tr><tr><td>Screw/Adhesive Cable Tie Mounting Bases - 3/4 inch base &amp;ndash; &lt;strong&gt;Quantity 4&lt;/strong&gt;</td><td>Superbrightleds.com</td><td>CTMB-20</td><td></td></tr><tr><td>SPST Round Rocker Switch - No LED &amp;ndash; &lt;strong&gt;Quantity 3&lt;/strong&gt;</td><td>Superbrightleds.com</td><td>RRS-SP</td><td></td></tr><tr><td>Tiffen 29 Filter (Red) 72 mm&amp;nbsp;</td><td>Tiffen</td><td>72R29</td><td></td></tr><tr><td>Tiffen 58 Filter (Green) 72 mm</td><td>Tiffen</td><td>7258</td><td></td></tr><tr><td>&lt;strong&gt;Software&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>ImageJ64</td><td>https://imagej.net/downloads</td><td>N/A</td><td>Free. Just cite: Schindelin, J., Arganda-Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., &amp;hellip; Cardona, A. (2012). Fiji: an open-source platform for biological-image analysis. Nature Methods, 9(7), 676&amp;ndash;682. doi:10.1038/nmeth.2019</td></tr><tr><td>MacOSX</td><td>Apple</td><td>N/A</td><td>Has a useful batch rename feature in Finder to rename a group of photos to facilitate organizing and analyzing in Count-on-it.</td></tr><tr><td>Unix</td><td>BSD</td><td>N/A</td><td>64 bit</td></tr><tr><td>Windows</td><td>Microsoft</td><td>N/A</td><td>64 bit</td></tr></tbody></table>

fast colony forming unit counting in 96-well plate format applied to the drosophila microbiome

The intestines of animals are colonized by commensal microbes, which impact host development, health, and behavior. Precise quantification of colonization is essential for studying the complex interactions between host and microbe both to validate the microbial composition and study its effects. Drosophila melanogaster,&#160;which has a low native microbial diversity and is economical to rear with defined microbial composition, has emerged as a model organism for studying the gut microbiome. Analyzing the microbiome of an individual organism requires identification of which microbial species are present and quantification of their absolute abundance. This article presents a method for the analysis of a large number of individual fly microbiomes. The flies are prepared in 96-well plates, enabling the handling of a large number of samples at once. Microbial abundance is quantified by plating up to 96 whole fly homogenates on a single agar plate in an array of spots and then counting the colony forming units (CFUs) that grow in each spot. This plating system is paired with an automated CFU quantification platform, which incorporates photography of the plates, differentiation of fluorescent colonies, and automated counting of the colonies using an ImageJ plugin. Advantages are that (i) this method is sensitive enough to detect differences between treatments, (ii) the spot plating method is as accurate as traditional plating methods, and (iii) the automated counting process is accurate and faster than manual counting. The workflow presented here enables high-throughput quantification of CFUs in a large number of replicates and can be applied to other microbiology study systems including in vitro and other small animal models.

Watch this Scientific Journal Video about Fast Colony Forming Unit Counting in 96-Well Plate Format Applied to the Drosophila Microbiome at JoVE.com

Fast Colony Forming Unit Counting in 96-Well Plate Format Applied to the Drosophila Microbiome

This method quantifies microbial abundance using a 96-well plate format to plate colony forming units (CFUs) and is applied to the Drosophila microbiome in whole fly homogenate samples. CFUs are counted with an automated image analysis software provided here.

Fast Colony Forming Unit Counting in 96-Well Plate Format Applied to the Drosophila Microbiome

The intestines of animals are colonized by commensal microbes, which impact host development, health, and behavior. Precise quantification of colonization ...

fast-colony-forming-unit-counting-96-well-plate-format-applied-to

Research

JoVE Journal

Biology

6.6K Views.  Carnegie Institution for Science. This method quantifies microbial abundance using a 96-well plate format to plate colony forming units (CFUs) and is applied to the Drosophila microbiome in whole fly homogenate samples. CFUs are counted with an automated image analysis software provided here.

Video: Fast Colony Forming Unit Counting in 96-Well Plate Format Applied to the Drosophila Microbiome

Rearing the Fruit Fly Drosophila melanogaster Under Axenic and Gnotobiotic Conditions

The influence of microbes on myriad animal traits and behaviors has been increasingly recognized in recent years. The fruit fly Drosophila melanogaster is a model for understanding microbial interactions with animal hosts, facilitated by approaches to rear large sample sizes of Drosophila under microorganism-free (axenic) conditions, or with defined microbial communities (gnotobiotic). This work outlines a method for collection of Drosophila embryos, hypochlorite dechorionation and sterilization, and transfer to sterile diet. Sterilized embryos are transferred to sterile diet in 50 ml centrifuge tubes, and developing larvae and adults remain free of any exogenous microbes until the vials are opened. Alternatively, flies with a defined microbiota can be reared by inoculating sterile diet and embryos with microbial species of interest. We describe the introduction of 4 bacterial species to establish a representative gnotobiotic microbiota in Drosophila. Finally, we describe approaches for confirming bacterial community composition, including testing if axenic Drosophila remain bacteria-free into adulthood.

Rearing the Fruit Fly Drosophila melanogaster Under Axenic and Gnotobiotic Conditions

A method for rearing Drosophila melanogaster under axenic and gnotobiotic conditions is presented. Fly embryos are dechorionated in sodium hypochlorite, transferred aseptically to sterile diet, and reared in closed containers. Inoculating diet and embryos with bacteria leads to gnotobiotic associations, and bacterial presence is confirmed by plating whole-body Drosophila homogenates.

The influence of microbes on myriad animal traits and behaviors has been increasingly recognized in recent years. The fruit fly Drosophila melanogaster is ...

Developmental Biology

Quantitative Measurement of the Immune Response and Sleep in Drosophila

A complex interaction between the immune response and host behavior has been described in a wide range of species. Excess sleep, in particular, is known to occur as a response to infection in mammals 1 and has also recently been described in Drosophila melanogaster2. It is generally accepted that sleep is beneficial to the host during an infection and that it is important for the maintenance of a robust immune system3,4. However, experimental evidence that supports this hypothesis is limited4, and the function of excess sleep during an immune response remains unclear. We have used a multidisciplinary approach to address this complex problem, and have conducted studies in the simple genetic model system, the fruitfly Drosophila melanogaster. We use a standard assay for measuring locomotor behavior and sleep in flies, and demonstrate how this assay is used to measure behavior in flies infected with a pathogenic strain of bacteria. This assay is also useful for monitoring the duration of survival in individual flies during an infection. Additional measures of immune function include the ability of flies to clear an infection and the activation of NF&kappa;B, a key transcription factor that is central to the innate immune response in Drosophila. Both survival outcome and bacterial clearance during infection together are indicators of resistance and tolerance to infection. Resistance refers to the ability of flies to clear an infection, while tolerance is defined as the ability of the host to limit damage from an infection and thereby survive despite high levels of pathogen within the system5. Real-time monitoring of NF&kappa;B activity during infection provides insight into a molecular mechanism of survival during infection. The use of Drosophila in these straightforward assays facilitates the genetic and molecular analyses of sleep and the immune response and how these two complex systems are reciprocally influenced.

Quantitative Measurement of the Immune Response and Sleep in Drosophila

To understand a link between the immune response and behavior, we describe a method to measure locomotor behavior in Drosophila during bacterial infection as well as the ability of flies to mount an immune response by monitoring survival, bacterial load, and real-time activity of a key regulator of innate immunity, NF&kappa;B.

A complex interaction between the immune response and  host behavior has been described in a wide range of species. Excess sleep, in  particular, is known ...

Immunology and Infection

A High Throughput Microplate Feeder Assay for Quantification of Consumption in Drosophila

Quantifying food intake in Drosophila is used to study the genetic and physiological underpinnings of consumption-associated traits, their environmental factors, and the toxicological and pharmacological effects of numerous substances. Few methods currently implemented are amenable to high throughput measurement. The Microplate Feeder Assay (MFA) was developed for quantifying the consumption of liquid food for individual flies using absorbance. In this assay, flies consume liquid food medium from select wells of a 1536-well microplate. By incorporating a dilute tracer dye into the liquid food medium and loading a known volume into each well, absorbance measurements of the well acquired before and after consumption reflect the resulting change in volume (i.e., volume consumed). To enable high throughput analysis with this method, a 3D-printed coupler was designed that allows flies to be sorted individually into 96-well microplates. This device precisely orients 96- and 1536-well microplates to give each fly access to up to 4 wells for consumption, thus enabling food preference quantification in addition to regular consumption. Furthermore, the device has barrier strips that toggle between open and closed positions to allow for controlled containment and release of a column of samples at a time. This method enables high throughput measurements of consumption of aqueous solutions by many flies simultaneously. It also has the potential to be adapted to other insects and to screen consumption of nutrients, toxins, or pharmaceuticals.

A High Throughput Microplate Feeder Assay for Quantification of Consumption in Drosophila

The microplate feeder assay offers an economical, high throughput method for quantifying liquid food consumption in Drosophila. A 3D-printed device connects a 96-well microplate in which flies are housed to a 1536-well microplate from which flies consume a feeding solution with a tracer dye. The solution volume decline is measured spectrophotometrically.

Quantifying food intake in Drosophila is used to study the genetic and physiological underpinnings of consumption-associated traits, their environmental ...

Behavior

Oral Bacterial Infection and Shedding in Drosophila melanogaster

The fruit fly Drosophila melanogaster is one of the best developed model systems of infection and innate immunity. While most work has focused on systemic infections, there has been a recent increase of interest in the mechanisms of gut immunocompetence to pathogens, which require methods to orally infect flies. Here we present a protocol to orally expose individual flies to an opportunistic bacterial pathogen (Pseudomonas aeruginosa) and a natural bacterial pathogen of D. melanogaster (Pseudomonas entomophila). The goal of this protocol is to provide a robust method to expose male and female flies to these pathogens. We provide representative results showing survival phenotypes, microbe loads, and bacterial shedding, which is relevant for the study of heterogeneity in pathogen transmission. Finally, we confirm that Dcy mutants (lacking the protective peritrophic matrix in the gut epithelium) and Relish mutants (lacking a functional immune deficiency (IMD) pathway), show increased susceptibility to bacterial oral infection. This protocol, therefore, describes a robust method to infect flies using the oral route of infection, which can be extended to the study of a variety genetic and environmental sources of variation in gut infection outcomes and bacterial transmission.

Oral Bacterial Infection and Shedding in Drosophila melanogaster

This protocol describes methods to orally expose and infect the fruit fly Drosophila melanogaster with bacterial pathogens, and to measure the number of infectious bacteria shed following gut infection. We further describe the effect of immune mutants on fly survival following oral bacterial infection.

The fruit fly Drosophila melanogaster is one of the best developed model systems of infection and innate immunity. While most work has focused on systemic ...

Accelerating Tuberculosis Determination Using the Micro-CFU Method

Micro-Colony Forming Unit Assay for Efficacy Evaluation of Vaccines Against Tuberculosis

Tuberculosis (TB), the leading cause of death worldwide by an infectious agent, killed 1.6 million people in 2022, only being surpassed by COVID-19 during the 2019-2021 pandemic. The disease is caused by the bacterium Mycobacterium tuberculosis (M.tb). The Mycobacterium bovis strain Bacillus Calmette-Gu&#233;rin (BCG), the only TB vaccine, is the oldest licensed vaccine in the world, still in use. Currently, there are 12 vaccines in clinical trials and dozens of vaccines under pre-clinical development. The method of choice used to assess the efficacy of TB vaccines in pre-clinical studies is the enumeration of bacterial colonies by the colony-forming units (CFU) assay. This time-consuming assay takes 4 to 6 weeks to conclude, requires substantial laboratory and incubator space, has high reagent costs, and is prone to contamination. Here we describe an optimized method for colony enumeration, the micro-CFU (mCFU), that offers a simple and rapid solution to analyze M.tb vaccine efficacy results. The mCFU assay requires tenfold fewer reagents, reduces the incubation period threefold, taking 1 to 2 weeks to conclude, reduces lab space and reagent cost, and minimizes the health and safety risks associated with working with large numbers of M.tb. Moreover, to evaluate the efficacy of a TB vaccine, samples may be obtained from a variety of sources, including tissues from vaccinated animals infected with Mycobacteria. We also describe an optimized method to produce a unicellular, uniform, and high-quality mycobacterial culture for infection studies. Finally, we propose that these methods should be universally adopted for pre-clinical studies of vaccine efficacy determination, ultimately leading to time reduction in the development of vaccines against TB.

Author Spotlight: Optimizing CFU Determination for Efficient Assessment of TB Vaccine Efficacy and Antigen Presentation Analysis 

The determination of colony-forming units (CFU) is the gold-standard technique for quantifying bacteria, including Mycobacterium tuberculosis which can take weeks to form visible colonies. Here we describe a micro-CFU for CFU determination with increased time efficiency, reduced lab space and reagent cost, and scalability to medium and high throughput experiments.

Tuberculosis (TB), the leading cause of death worldwide by an infectious agent, killed 1.6 million people in 2022, only being surpassed by COVID-19 during ...

Medicine

Measuring Crop Motility and Food Passaging in Drosophila

Most animals use the gastrointestinal (GI) tract to digest food. The movement of the ingested food in the GI tract is essential for nutrient absorption. Disordered GI motility and gastric emptying cause multiple diseases and symptoms. As a powerful genetic model organism, Drosophila can be used in GI motility research. The Drosophila crop is an organ that contracts and moves food into the midgut for further digestion, functionally similar to a mammalian stomach. Presented is a protocol to study Drosophila crop motility using simple measurement tools. A method for counting crop contractions to evaluate crop motility and a method for detecting the distribution of food dyed blue between the crop and gut using a spectrophotometer to investigate the effect of the crop on food passaging is described. The method was used to detect the difference in crop motility between control and nprl2 mutant flies. This protocol is both cost-efficient and highly sensitive to crop motility.

Measuring Crop Motility and Food Passaging in Drosophila

The goal of this protocol is to measure crop contraction and quantify food distribution in the Drosophila gut.

Most animals use the gastrointestinal (GI) tract to digest food. The movement of the ingested food in the GI tract is essential for nutrient absorption. ...

High-Throughput Live Imaging of Microcolonies to Measure Heterogeneity in Growth and Gene Expression

Precise measurements of between- and within-strain heterogeneity in microbial growth rates are essential for understanding genetic and environmental inputs into stress tolerance, pathogenicity, and other key components of fitness. This manuscript describes a microscope-based assay that tracks approximately 105&#160;Saccharomyces cerevisiae microcolonies per experiment. After automated time-lapse imaging of yeast immobilized in a multiwell plate, microcolony growth rates are easily analyzed with custom image-analysis software. For each microcolony, expression and localization of fluorescent proteins and survival of acute stress can also be monitored. This assay allows precise estimation of strains&#39; average growth rates, as well as comprehensive measurement of heterogeneity in growth, gene expression, and stress tolerance within clonal populations.

Yeast growth phenotypes are precisely measured through highly parallel time-lapse imaging of immobilized cells growing into microcolonies. Simultaneously, stress tolerance, protein expression, and protein localization can be monitored, generating integrated datasets to study how environmental and genetic differences, as well as gene-expression heterogeneity among isogenic cells, modulate growth.

Precise measurements of between- and within-strain heterogeneity in microbial growth rates are essential for understanding genetic and environmental ...

Serial Dilutions and Plating: Microbial Enumeration

Source: Jonathan F. Blaize1, Elizabeth Suter1, and Christopher P. Corbo1 
1 Department of Biological Sciences, Wagner College, 1 Campus Road, Staten Island NY, 10301
Quantitative assessment of prokaryotes can be onerous given their abundance, propensity for exponential proliferation, species diversity within a population, and specific physiological needs. Compounding this challenge, is the four-phase nature in which bacteria replicate (lag, log, stationary and death). The ability to accurately estimate microorganism concentration is necessary for successful identification, isolation, cultivation, and characterization (6). As such, microbiologists have employed serial dilution and various plating techniques for over a century to reliably quantify bacterial and viral load in clinical, industrial, pharmaceutical, and academic laboratory environments (2,4,6). Descriptions of this methodology first appeared in 1883 when the German scientist and physician Robert Koch published his work on infectious disease-causing agents (2). Often referred to as the father of modern bacteriology, Koch&#39;s forenamed techniques have become the gold standard for enumeration of microorganisms, culturable or otherwise, throughout the world.
Serial dilution is a systematic reduction of a known or unknown entity (a solute, organism, etc.) through successive re-suspension of an initial solution (solution0) into fixed volumes of a liquid diluent (blanks). These blanks usually consist of 0.45% saline, though the composition can be varied (7). While an experimenter can choose any volume for each diluent, it is most often a multiple of 10, facilitating logarithmic reduction of the sample. For example, solution0 contains a total of 100 E. coli cells suspended in 10 mL of nutrient broth. If 1 mL of solution0 is removed and added to 9 mL of saline (diluent1), the new solution (solution1) would contain 1/10th of the initial concentration of E. coli. In this example, the new solution (solution1) would contain 10 E. coli cells. Repeating this process by removing 1 mL of solution1 and adding it to another 9 mL of saline (diluent2) would yield solution2, containing only a single E. coli cell. Since each new solution (9 mL of diluent + 1 mL of solution) contains a total of 10mL, we can conclude that the dilution factor for this reduction is 10 or that this was a 10-fold serial dilution (Figure 1). Since we only began with 100 cells in this example and we are diluting by a factor of 10, only two steps are required to reach the absolute minimum concentration of 1 cell.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/10507/10507fig1.jpg" /> 
Figure 1: Serial dilution of a stock solution. A 1 mL aliquot of the stock solution (solution0) is added to tube 1 which contains 9 mL of 0.45% saline (dilent1); the product of this mixture is solution1. Repeat by aliquoting 1 mL of the newly created solution1 and adding it to tube 2. Aliquoting and resuspension continues in this fashion until the final tube is reached, diluting the stock concentration by a factor of 10 each with each step. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/10507/10507fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
Serial dilution is the simplest technique for obtaining manageable concentrations of a desired organism and it is complemented by petri dish streaking and spreading, just two of many plating techniques used by microbiologists. This benefit of this approach is that the experimenter can harvest pure strains of a single species or separate strains from a mixed population (7). Streaking is accomplished by introducing an organism to a solid medium (generally consisting of agarose) that it will grow upon if the appropriate nutrients are available. Gently sweeping a sterile inoculating loop across the medium (so that a subtle streak remains) in a rigid sinusoidal pattern will distribute the organism proportionally to the frequency of the experimenter&#39;s waveform. Dividing the Petri dish into thirds or fourths (quadrant streak) and decreasing the frequency of each streak as a new region of the dish is entered will gradually reduce the number of microorganisms that can occupy that region, producing single colonies instead of an unquantifiable bacterial lawn. Spread plating does not additionally dilute samples; a sterile glass spreader is used to distribute an aliquot of suspension media across an entire petri dish (Figure 2). The colonies that grow on the spread plate arise from a single cell and each colony on the dish can be counted to estimate the number of colony forming units per milliliter (CFU) in a given suspension, represented as CFU/mL (6) (Figure 3) Soft agar and replica plating are variations of the aforementioned techniques and allow for isolation of bacteriophage and mutant screening, respectively (1,7).
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/10507/10507fig2.jpg" /> 
Figure 2: Plate streaking for bacterial enumeration and strain isolation. Label the bottom of a petri dish with identification information (bacteria name, date, media) and divide into thirds. After selecting an appropriate dilution of the stock sample, take a sterile (disposable or flamed) inoculating loop and submerge it the test tube (here, T3). Slightly raise the petri dish cover on one side so that only the inoculating loop can access the agar. Glide the inoculating loop across the top of the media in a zig-zag fashion being careful not to compromise the agar. Rotate the plate by roughly 1/3rd (~118&#176;) and reduce the frequency of zig-zag motion. Rotate a final time and reduce zig-zag frequency once more. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/10507/10507fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 3" class="xfigimg" src="/files/ftp_upload/10507/10507fig3.jpg" /> 
Figure 3: Spread plating. 1 g of the aerobic zone was resuspended in T1 and then serially diluted. A sterile glass or plastic disposable spreading rod is used to distribute inoculum throughout each dish. This was repeated with 1 g of the anaerobic zone. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/10507/10507fig3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
As with serial dilutions, a logarithmic scale is employed to express organismal concentration. The number of colonies grown in standard petri dishes measuring 100mm x15mm can be enumerated manually (or automated with the aid of computational processing) by identifying isolated clusters of growth. Counts that total fewer than 30 or greater than 300 should be defined as too few to count (TFTC) or too numerous to count (TNTC), respectively. In the case of the latter, a serial dilution should be performed to reduce concentration before restreaking a new petri dish. Averaging the number of self-contained colonies identified from three separate petri dishes and multiplying the mean by the dilution factor will yield CFU/mL; plotting the log10 of CFU/mL against time will reveal the mean generation time of the organism (7).

Source: Jonathan F. Blaize1, Elizabeth Suter1, and Christopher P. Corbo1
1 Department of Biological Sciences, Wagner College, 1 Campus Road, Staten Island ...

Education

JoVE Science Education

Advanced Biology

Microbiology

Counting Colony Forming Units (CFUs): Quantifying Bacteria from Fly Bodies

Source: Koyle, M. L., et al. <a href="https://www-jove-com.remotexs.ntu.edu.sg/video/54219/" target="_blank">Rearing the Fruit Fly &#38; Drosophila melanogaster Under Axenic and Gnotobiotic Conditions</a>. J. Vis. Exp. (2016).
Drosophila microbiota impacts the animal&#39;s development, immunity and physiology. This video describes a method to quantify bacteria from flies by determining the colony forming units from whole body preparations. The featured protocol demonstrates the technique with flies, reared under gnotobiotic conditions using four bacterial species.

Source: Koyle, M. L., et al. Rearing the Fruit Fly &#38; Drosophila melanogaster Under Axenic and Gnotobiotic Conditions. J. Vis. Exp. (2016).
Drosophila ...

JoVE Encyclopedia of Experiments

Drosophila melanogaster (fruit fly)

Adult

Quantification of Bacterial Infection in Host Cells by the Colony-Forming Unit Assay

To harvest, slightly tilt the dish and carefully use a pipette to remove the entire media from the well. Add 0.5 milliliters of distilled sterile water to the well. After 30 seconds, transfer the resulting water lysate to a 1.5-milliliter microcentrifuge tube and vortex vigorously for 10 seconds.
Add 4.5 microliters and 50 microliters of the water lysate to 450 microliters of distilled sterile water to prepare the 10-fold and 100-fold dilutions. Briefly, vortex to ensure thorough mixing. Add 50 microliters of the original 10-fold diluted and 100-fold diluted samples onto lysogeny broth agar plates and spread using a plate spreader.
To assay for emergent Lm, extract 10 microliters of the overlaying media from the dish, and divide it into two 5-microliter aliquots in microcentrifuge tubes. Add 5 microliters of DMEM/FCS to one aliquot and add 5 microliters of DMEM/FCS containing 5 microliters per milliliter gentamicin to the second aliquot as control.
Wait 5 minutes at room temperature. Add 90 microliters of distilled sterile water to each aliquot and vortex the tube vigorously for 10 seconds. Then, add 50 microliters of the sample on LB agar plates, and spread using a plate spreader. Store the plates in 37-degrees-Celsius incubator for two days before enumerating Lm colonies.

Fast Colony Forming Unit Counting in 96-Well Plate Format Applied to the Drosophila Microbiome

Summary

Explore More Videos

Chapters in this video

Rearing the Fruit Fly Drosophila melanogaster Under Axenic and Gnotobiotic Conditions

Quantitative Measurement of the Immune Response and Sleep in Drosophila

A High Throughput Microplate Feeder Assay for Quantification of Consumption in Drosophila

Oral Bacterial Infection and Shedding in Drosophila melanogaster

Micro-Colony Forming Unit Assay for Efficacy Evaluation of Vaccines Against Tuberculosis

Measuring Crop Motility and Food Passaging in Drosophila

High-Throughput Live Imaging of Microcolonies to Measure Heterogeneity in Growth and Gene Expression

Serial Dilutions and Plating: Microbial Enumeration

Counting Colony Forming Units (CFUs): Quantifying Bacteria from Fly Bodies

Quantification of Bacterial Infection in Host Cells by the Colony-Forming Unit Assay