transformation of plasmid dna into e. coli using the heat shock method

Transformação do DNA plasmidial em E. coli utilizando o método de choque térmico é uma técnica básica de biologia molecular. Ele consiste na inserção de um produto estrangeiro plasmídeo ou ligadura em bactérias. Este protocolo de vídeo descreve o método tradicional de transformação usando comercialmente disponíveis quimicamente bactérias competentes de Genlantis. Após uma curta incubação no gelo, uma mistura de bactérias quimicamente competentes e DNA é colocado a 42 ° C por 45 segundos (choque térmico) e depois colocados de volta no gelo. SOC media é adicionado e as células transformadas são incubados a 37 ° C por 30 min com agitação. Para ter certeza de isolar as colônias, independentemente da eficiência de transformação, duas quantidades de bactérias transformadas são banhados. Este protocolo tradicional pode ser utilizado com sucesso para transformar a maioria disponível comercialmente bactérias competentes. O turbocells de Genlantis também pode ser usado em um protocolo de transformação romance de 3 minutos, descrito no manual de instruções.

Watch this Scientific Journal Video about Transformation of Plasmid DNA into E. coli Using the Heat Shock Method at JoVE.com

Transformation of Plasmid DNA into E. coli Using the Heat Shock Method

Transformação do DNA plasmidial em E. coli Usando o método de choque térmico

Transformation of plasmid DNA into E. coli using the heat shock method is a basic technique of molecular biology. It consists of inserting a foreign ...

transformation-of-plasmid-dna-into-e-coli-using-the-heat-shock-method

Nanyang Technological University

Research

JoVE Journal

Biology

67.1K visualizações.  University of California, Irvine (UCI). 

Vídeo: Transformation of Plasmid DNA into E. coli Using the Heat Shock Method

Purifying Plasmid DNA from Bacterial Colonies Using the Qiagen Miniprep Kit

Plasmid DNA purification from E. coli is a core technique for molecular cloning. Small scale purification (miniprep) from less than 5 ml of bacterial culture is a quick way for clone verification or DNA isolation, followed by further enzymatic reactions (polymerase chain reaction and restriction enzyme digestion). Here, we video-recorded the general procedures of miniprep through the QIAGEN's QIAprep 8 Miniprep Kit, aiming to introducing this highly efficient technique to the general beginners for molecular biology techniques. The whole procedure is based on alkaline lysis of E. coli cells followed by adsorption of DNA onto silica in the presence of high salt. It consists of three steps: 1) preparation and clearing of a bacterial lysate, 2) adsorption of DNA onto the QIAprep membrane, 3) washing and elution of plasmid DNA. All steps are performed without the use of phenol, chloroform, CsCl, ethidium bromide, and without alcohol precipitation. It usually takes less than 2 hours to finish the entire procedure.

Purificação de DNA plasmidial colônias bacterianas Usando o Kit Qiagen Miniprep

Plasmid DNA purification from E. coli is a core technique for molecular cloning. Small scale purification (miniprep) from less than 5 ml of bacterial ...

Biologia

Generation of RNA/DNA Hybrids in Genomic DNA by Transformation using RNA-containing Oligonucleotides

Synthetic short nucleic acid polymers, oligonucleotides (oligos), are the most functional and widespread tools of molecular biology. Oligos can be produced to contain any desired DNA or RNA sequence and can be prepared to include a wide variety of base and sugar modifications. Moreover, oligos can be designed to mimic specific nucleic acid alterations and thus, can serve as important tools to investigate effects of DNA damage and mechanisms of repair. We found that Thermo Scientific Dharmacon RNA-containing oligos with a length between 50 and 80 nucleotides can be particularly suitable to study, in vivo, functions and consequences of chromosomal RNA/DNA hybrids and of ribonucleotides embedded into DNA. RNA/DNA hybrids can readily form during DNA replication, repair and transcription, however, very little is known about the stability of RNA/DNA hybrids in cells and to which extent these hybrids can affect the genetic integrity of cells. RNA-containing oligos, therefore, represent a perfect vector to introduce ribonucleotides into chromosomal DNA and generate RNA/DNA hybrids of chosen length and base composition. Here we present the protocol for the incorporation of ribonucleotides into the genome of the eukaryotic model system yeast /Saccharomyces cerevisiae/. Yet, our lab has utilized Thermo Scientific Dharmacon RNA-containing oligos to generate RNA/DNA hybrids at the chromosomal level in different cell systems, from bacteria to human cells.

This work shows how to form an RNA/DNA hybrid at the chromosomal level and reveal transfer of genetic information from RNA to genomic DNA in yeast cells.

Geração de RNA / DNA híbrido em DNA genômico por transformação por meio de RNA contendo Oligonucleotídeos

Synthetic short nucleic acid polymers, oligonucleotides (oligos), are the most functional and widespread tools of molecular biology. Oligos can be ...

Visualization of UV-induced Replication Intermediates in E. coli using Two-dimensional Agarose-gel Analysis

Inaccurate replication in the presence of DNA damage is responsible for the majority of cellular rearrangements and mutagenesis observed in all cell types and is widely believed to be directly associated with the development of cancer in humans. DNA damage, such as that induced by UV irradiation, severely impairs the ability of replication to duplicate the genomic template accurately. A number of gene products have been identified that are required when replication encounters DNA lesions in the template. However, a remaining challenge has been to determine how these proteins process lesions during replication in vivo. Using Escherichia coli as a model system, we describe a procedure in which two-dimensional agarose-gel analysis can be used to identify the structural intermediates that arise on replicating plasmids in vivo following UV-induced DNA damage. This procedure has been used to demonstrate that replication forks blocked by UV-induced damage undergo a transient reversal that is stabilized by RecA and several gene products associated with the RecF pathway. The technique demonstrates that these replication intermediates are maintained until a time that correlates with the removal of the lesions by nucleotide excision repair and replication resumes.

Visualization of UV-induced Replication Intermediates in E. coli using Two-dimensional Agarose-gel Analysis

We present a procedure by which two-dimensional agarose-gel analysis can be used to identify the structure of replication intermediates that occur following UV irradiation.

Visualização dos Intermediários UV-induzida replicação em E. coli Usando bidimensional Análise Agarose-gel

Inaccurate replication in the presence of DNA damage is responsible for the majority of cellular rearrangements and mutagenesis observed in all cell types ...

Streamlined Purification of Plasmid DNA From Prokaryotic Cultures

We describe the complete process of AcroPrep Advance Filter Plates for 96 plasmid preparations, starting from prokaryotic culture and ending with high purity DNA. Based on multi-well filtration for bacterial lysate clearance and DNA purification, this method creates a streamlined process for plasmid preparation. Filter plates containing silica-based media can easily be processed by vacuum filtration or centrifuge to yield appreciable quantities of plasmid DNA. Quantitative analyses determine the purified plasmid DNA is consistently of high quality with average OD260/280 ratios of 1.97. Overall, plasmid yields offer more pure DNA for downstream applications, such as sequencing and cloning. This streamlined method of using AcroPrep Advance Filter Plates allows for manual, semi-automated or fully-automated processing.

This protocol is a cost effective alternative for efficient parallel clarification and plasmid DNA purification from E. coli cultures. The AcroPrep Advance process starts with an optimized lysate clarification filter plate followed by purification on a high binding capacity DNA binding filter plate.

Purificação simplificada do DNA plasmidial das culturas Procarióticas

We describe the complete process of AcroPrep Advance Filter Plates for 96 plasmid preparations, starting from prokaryotic culture and ending with high ...

Mutagenesis and Functional Selection Protocols for Directed Evolution of Proteins in E. coli

The efficient generation of genetic diversity represents an invaluable molecular tool that can be used to label DNA synthesis, to create unique molecular signatures, or to evolve proteins in the laboratory. Here, we present a protocol that allows the generation of large (>1011) mutant libraries for a given target sequence. This method is based on replication of a ColE1 plasmid encoding the desired sequence by a low-fidelity variant of DNA polymerase I (LF-Pol I). The target plasmid is transformed into a mutator strain of E. coli and plated on solid media, yielding between 0.2 and 1 mutations/kb, depending on the location of the target gene. Higher mutation frequencies are achieved by iterating this process of mutagenesis. Compared to alternative methods of mutagenesis, our protocol stands out for its simplicity, as no cloning or PCR are involved. Thus, our method is ideal for mutational labeling of plasmids or other Pol I templates or to explore large sections of sequence space for the evolution of activities not present in the original target. The tight spatial control that PCR or randomized oligonucleotide-based methods offer can also be achieved through subsequent cloning of specific sections of the library. Here we provide protocols showing how to create a random mutant library and how to establish drug-based selections in E. coli to identify mutants exhibiting new biochemical activities.

Mutagenesis and Functional Selection Protocols for Directed Evolution of Proteins in E. coli

Here we demonstrate a simple protocol to create a random mutant library for a given target sequence. We show how this method, which is performed in vivo in Escherichia coli, can be coupled with functional selections to evolve new enzymatic activities.

Mutagênese e Funcional Protocolos de Seleção para a Evolução Dirigida de proteínas em E. coli</em

The efficient generation of genetic diversity represents an invaluable molecular tool that can be used to label DNA synthesis, to create unique molecular ...

The Logic, Experimental Steps, and Potential of Heterologous Natural Product Biosynthesis Featuring the Complex Antibiotic Erythromycin A Produced Through E. coli

The heterologous production of complex natural products is an approach designed to address current limitations and future possibilities. It is particularly useful for those compounds which possess therapeutic value but cannot be sufficiently produced or would benefit from an improved form of production. The experimental procedures involved can be subdivided into three components: 1) genetic transfer; 2) heterologous reconstitution; and 3) product analysis. Each experimental component is under continual optimization to meet the challenges and anticipate the opportunities associated with this emerging approach.
Heterologous biosynthesis begins with the identification of a genetic sequence responsible for a valuable natural product. Transferring this sequence to a heterologous host is complicated by the biosynthetic pathway complexity responsible for product formation. The antibiotic erythromycin A is a good example. Twenty genes (totaling &gt;50 kb) are required for eventual biosynthesis. In addition, three of these genes encode megasynthases, multi-domain enzymes each ~300 kDa in size. This genetic material must be designed and transferred to E. coli for reconstituted biosynthesis. The use of PCR isolation, operon construction, multi-cystronic plasmids, and electro-transformation will be described in transferring the erythromycin A genetic cluster to E. coli.
Once transferred, the E. coli cell must support eventual biosynthesis. This process is also challenging given the substantial differences between E. coli and most original hosts responsible for complex natural product formation. The cell must provide necessary substrates to support biosynthesis and coordinately express the transferred genetic cluster to produce active enzymes. In the case of erythromycin A, the E. coli cell had to be engineered to provide the two precursors (propionyl-CoA and (2S)-methylmalonyl-CoA) required for biosynthesis. In addition, gene sequence modifications, plasmid copy number, chaperonin co-expression, post-translational enzymatic modification, and process temperature were also required to allow final erythromycin A formation.
Finally, successful production must be assessed. For the erythromycin A case, we will present two methods. The first is liquid chromatography-mass spectrometry (LC-MS) to confirm and quantify production. The bioactivity of erythromycin A will also be confirmed through use of a bioassay in which the antibiotic activity is tested against Bacillus subtilis. The assessment assays establish erythromycin A biosynthesis from E. coli and set the stage for future engineering efforts to improve or diversify production and for the production of new complex natural compounds using this approach.

The Logic, Experimental Steps, and Potential of Heterologous Natural Product Biosynthesis Featuring the Complex Antibiotic Erythromycin A Produced Through E. coli

The heterologous biosynthesis of erythromycin A through E. coli includes the following experimental steps: 1) genetic transfer; 2) heterologous reconstitution; and 3) product analysis. Each step will be explained in the context of the motivation, potential, and challenges in producing therapeutic natural products using E. coli as a surrogate host.

A Lógica, etapas experimentais, e potencial de Biossíntese produto heteróloga Natural Apresentando o complexo antibiótico eritromicina Um produzido através<em&gt; E. coli</em

The heterologous production of complex natural products is an approach designed to address current limitations and future possibilities.  It is ...

Robust 3D DNA FISH Using Directly Labeled Probes

3D DNA FISH has become a major tool for analyzing three-dimensional organization of the nucleus, and several variations of the technique have been published. In this article we describe a protocol which has been optimized for robustness, reproducibility, and ease of use. Brightly fluorescent directly labeled probes are generated by nick-translation with amino-allyldUTP followed by chemical coupling of the dye. 3D DNA FISH is performed using a freeze-thaw step for cell permeabilization and a heating step for simultaneous denaturation of probe and nuclear DNA. The protocol is applicable to a range of cell types and a variety of probes (BACs, plasmids, fosmids, or Whole Chromosome Paints) and allows for high-throughput automated imaging. With this method we routinely investigate nuclear localization of up to three chromosomal regions.

We describe a robust and versatile protocol for analyzing nuclear architecture by 3D DNA FISH using directly labeled fluorescent probes.

Robust FISH DNA 3D utilizando sondas Diretamente rotuladas

3D DNA FISH has become a major tool for  analyzing three-dimensional organization of the nucleus, and several variations  of the technique have been ...

Production of Human Norovirus Protruding Domains in E. coli for X-ray Crystallography

The norovirus capsid is composed of a single major structural protein, termed VP1. VP1 is subdivided into a shell (S) domain and a protruding (P) domain. The S domain forms a contiguous scaffold around the viral RNA, whereas the P domain forms viral spikes on the S domain and contains determinants for antigenicity and host-cell interactions. The P domain binds carbohydrate structures, i.e., histo-blood group antigens, which are thought to be important for norovirus infections. In this protocol, we describe a method for producing high quality norovirus P domains in high yields. These proteins can then be used for X-ray crystallography and ELISA in order to study antigenicity and host-cell interactions.
The P domain is firstly cloned into an expression vector and then expressed in bacteria. The protein is purified using three steps that involve immobilized metal-ion affinity chromatography and size exclusion chromatography. In principle, it is possible to clone, express, purify, and crystallize proteins in less than four weeks, which makes this protocol a rapid system for analyzing newly emerging norovirus strains.

Production of Human Norovirus Protruding Domains in E. coli for X-ray Crystallography

Here, we describe a method to express and purify high quality norovirus protruding (P) domains in E. coli for use in X-ray crystallography studies. This method can be applied to other calicivirus P domains, as well as non-structural proteins, i.e., viral protein genome-linked (VPg), protease, and RNA dependent RNA polymerase (RdRp).

Produção de Domínios salientes Norovirus Humanos em<em&gt; E. coli</em&gt; Para raios-X Cristalografia

The norovirus capsid is composed of a single major structural protein, termed VP1. VP1 is subdivided into a shell (S) domain and a protruding (P) domain. ...

Inducing a Site Specific Replication Blockage in E. coli Using a Fluorescent Repressor Operator System

Obstacles present on DNA, including tightly-bound proteins and various lesions, can severely inhibit the progression of the cell&#39;s replication machinery. The stalling of a replisome can lead to its dissociation from the chromosome, either in part or its entirety, leading to the collapse of the replication fork. The recovery from this collapse is a necessity for the cell to accurately complete chromosomal duplication and subsequently divide. Therefore, when the collapse occurs, the cell has evolved diverse mechanisms that take place to restore the DNA fork and allow replication to be completed with high fidelity. Previously, these replication repair pathways in bacteria have been studied using UV damage, which has the disadvantage of not being localized to a known site. This manuscript describes a system utilizing a Fluorescence Repressor Operator System (FROS) to create a site-specific protein block that can induce the stalling and collapse of replication forks in Escherichia coli. Protocols detail how the status of replication can be visualized in single living cells using fluorescence microscopy and DNA replication intermediates can be analyzed by 2-dimensional agarose gel electrophoresis. Temperature sensitive mutants of replisome components (e.g. DnaBts) can be incorporated into the system to induce a synchronous collapse of the replication forks. Furthermore, the roles of the recombination proteins and helicases that are involved in these processes can be studied using genetic knockouts within this system.

Inducing a Site Specific Replication Blockage in E. coli Using a Fluorescent Repressor Operator System

We describe here a system utilizing a site-specific, reversible in vivo protein block to stall and collapse replication forks in Escherichia coli. The establishment of the replication block is evaluated by fluorescence microscopy and neutral-neutral 2-dimensional agarose gel electrophoresis is used to visualize replication intermediates.

Induzir um bloqueio de replicação de site específico no<i&gt; E. coli</i&gt; Usando um sistema fluorescente repressor de operador

Obstacles present on DNA, including tightly-bound proteins and various lesions, can severely inhibit the progression of the cell&#39;s replication ...

Novel Method of Plasmid DNA Delivery to Mouse Bladder Urothelium by Electroporation

Genetically engineered mouse models (GEMMs) are extremely valuable in revealing novel biological insights into the initiation and progression mechanisms of human diseases such as cancer. Transgenic and conditional knockout mice have been frequently used for gene overexpression or ablation in specific tissues or cell types in vivo. However, generating germline mouse models can be time-consuming and costly. Recent advancements in gene editing technologies and the feasibility of delivering DNA plasmids by viral infection have enabled rapid generation of non-germline autochthonous mouse cancer models for several organs. The bladder is an organ that has been difficult for viral vectors to access, due to the presence of a glycosaminoglycan layer covering the urothelium. Here, we describe a novel method developed in lab for efficient delivery of DNA plasmids into the mouse bladder urothelium in vivo. Through intravesical instillation of pCAG-GFP DNA plasmid and electroporation of surgically exposed bladder, we show that the DNA plasmid can be delivered specifically into the bladder urothelial cells for transient expression. Our method provides a fast and convenient way for overexpression and knockdown of genes in the mouse bladder, and can be applied to building GEMMs of bladder cancer and other urological diseases.

We describe a novel method for the delivery of DNA plasmid into the urothelial cells of mouse bladder in vivo through urethra catheterization and electroporation. It offers a fast and convenient way for generating autochthonous mouse models of bladder diseases.

Novo método de entrega de DNA do plasmídeo para Mouse bexiga Urotélio por eletroporação

Genetically engineered mouse models (GEMMs) are extremely valuable in revealing novel biological insights into the initiation and progression mechanisms ...

Transformação do DNA plasmidial em E. coli Usando o método de choque térmico

Resumo

Explore mais vídeos

Capítulos neste vídeo

Purificação de DNA plasmidial colônias bacterianas Usando o Kit Qiagen Miniprep

Geração de RNA / DNA híbrido em DNA genômico por transformação por meio de RNA contendo Oligonucleotídeos

Visualização dos Intermediários UV-induzida replicação em E. coli Usando bidimensional Análise Agarose-gel

Purificação simplificada do DNA plasmidial das culturas Procarióticas

Mutagênese e Funcional Protocolos de Seleção para a Evolução Dirigida de proteínas em E. coli

A Lógica, etapas experimentais, e potencial de Biossíntese produto heteróloga Natural Apresentando o complexo antibiótico eritromicina Um produzido através

Robust FISH DNA 3D utilizando sondas Diretamente rotuladas

Produção de Domínios salientes Norovirus Humanos em

Induzir um bloqueio de replicação de site específico no

Novo método de entrega de DNA do plasmídeo para Mouse bexiga Urotélio por eletroporação