eoe sub articles

EoE Sub Articles

All procedures involving sample collection have been performed in accordance with the institute&#39;s IRB guidelines.
NOTE: Recordings from Q175 wild-type (WT) and heterozygotes (HETs) can be performed at any age and sex. Here we studied males and females at an age of 51 to 76 weeks.
1. Injection of the Glutamate Sensor iGluu for Expression in Corticostriatal Axons
<ol>
	<li>Use the pipette puller (one step mode) to prepare borosilicate glass pipettes for the injection of the virus. After pulling, break the pipette manually to obtain a tip diameter of 30&#8211;50 &#181;m. Autoclave the pipette and surgical instruments, including the drill for opening the skull.</li>
	<li>Store the virus AAV9-CaMKIIa.iGluu.WPRE-hGH (7.5 x 1013gc/mL) at -80 &#176;C in 10 &#181;L aliquots. If injections are performed shortly after virus production (within 6 months), keep at 5 &#176;C. Before surgery, take out the vial and maintain it at room temperature.</li>
	<li>Fill the glass pipette and remove any bubbles.</li>
	<li>Anesthetize the animal with an intraperitoneal injection of a solution containing 87.5 mg/kg ketamine and 12.5 mg/kg xylazine. Subcutaneously inject 0.25% bupivacain (8 mg/kg) for additional pain relief. Check the depth of anesthesia by monitoring the muscle tone and observing the absence of pain-induced reflexes.</li>
	<li>Shave the skin on the head and sterilize it with 70% alcohol. Fit the mouse into the stereotaxic frame.</li>
	<li>Use a scalpel to remove the skin and a high-speed (38,000 rpm) drill to make a 1.2 mm hole in the bone above the motor cortex.</li>
	<li>Mount the syringe with the attached injection pipette in the holder of a precision manipulator. Insert the vertically oriented pipette into the cortex at 4 different sites. The injection coordinates are, with respect to bregma (in mm): anterior 1.5, lateral 1.56, 1.8, 2.04, 2.28. The depth with respect to dura mater is (in mm): 1.5&#8211;1.7.</li>
	<li>Using the injection system, inject 0.3 &#181;L per site of the undiluted virus solution with a velocity of 0.05 &#181;L/min. After each injection, leave the pipette in place for 1 min before withdrawing it slowly (1 mm/min).</li>
	<li>Finish by closing the surgical wound with a nylon suture.</li>
	<li>Leave the mouse for 0.5 to 1 h on a heating pad in a clean cage before returning it to its original cage.</li>
	<li>Maintain the mouse on a 12 h day-night cycle for 6 to 8 weeks before the preparation of acute brain slices. 
	NOTE: To avoid immune reactions resulting in cell damage and synapse loss, injection of multiple viral constructs must be performed simultaneously or within 2&#8211;3 hours after the primary injection. The coordinates for iGluu injection were selected according to the Paxinos and Franklin brain atlas. They correspond to the M1 motor cortex. Immunostaining of injected brains visualized numerous but mostly well isolated axons and axon varicosities in the ipsi- and contralateral striatum and in the contralateral M1 and S1 cortices.</li>
</ol>
2. Search for Glutamatergic Terminals Expressing the Glutamate Sensor iGluu
<ol>
	<li>Calibration mode
	<ol>
		<li>Prepare the sCMOS camera and the camera control software with the following settings. On the Readout page set Pixel readout rate: 560 MHz (= fastest readout), Sensitivity/Dynamic Range: bit, Spurious Noise Filter: Yes, Overlap Readout: Yes. On the Binning/ROI page, select Full screen.</li>
		<li>Prepare a glass slide containing a drop of 5 mg/mL Lucifer Yellow (LY) under a cover slip.</li>
		<li>Place the LY slide under a 63x objective, open the laser shutter and perform a serial acquisition using the following settings: Pixel Binning: 1x1, Trigger mode: Internal, Exposure time: Minimal (to be determined).</li>
		<li>Adjust the laser power to produce a fluorescence spot of 4 &#181;m in diameter (the image should not contain saturated pixels).</li>
		<li>To perform a calibration of the laser positioning system, select the following settings in the laser positioning software: Spot-size diameter: 10, Scanning velocity: 43.200 kHz. Click the Start image acquisition button on the right panel. Set Runs: 0, Run delay: 0, and select the Run at TTL option on the Sequence page. Click the Calibrate button on the Calibration page and calibrate the laser control software according instructions shown in the top-left corner of the acquisition screen.</li>
		<li>If the setup uses independent software for camera and laser control, acquire screenshots from the camera acquisition window and send it to the laser control software for a re-calculation of the XY coordinates. If the software is installed on different computers, then use a video grabber to import the image into the laser control software. The laser control software will need the information on the XY scaling factors and offsets. For this purpose, determine the coordinates of the top-left, bottom-left and bottom-right corners of the image within the acquisition window of the laser control program. Calculate the scaling factors according to the following equations: X factor = (X bottom-right &#8211; X bottom-left)/2048, X offset = X bottom-left, Y factor = (Y top-left &#8211; Y bottom-left)/2048, Y offset = Y bottom-left.</li>
		<li>At the end of the calibration procedure, create a rectangular region of interest (ROI) of 267x460 pixels, move it to the center of the screen and click the Start sequence button.</li>
		<li>Return to the following camera control software settings: Binning: 2x2, Trigger mode: External exposure, Exposure time: Minimal (to be determined).</li>
	</ol>
	</li>
	<li>Autofluorescence correction mode 
	NOTE: The resting level of [Glu] in the environment of active synaptic terminals is typically below 100 nM. Accordingly, any sensor of glutamate, especially a low affinity sensor like iGluu will be rather dim in the absence of synaptic glutamate release. Nevertheless, some iGluu fluorescence can even be detected at rest, but must be distinguished from the tissue autofluorescence. The 473 nm illumination elicits both iGluu fluorescence and autofluorescence (Figure 1A&#8211;C). The latter occupies a wide range of wavelengths, while iGluu fluorescence is limited to 480&#8211;580 nm (with a maximum at 510 nm). The correction for autofluorescence is based on the acquisition of two images with different high-pass filters.
	<ol>
		<li>Prepare brain slices in advance as described elsewhere. Keep bran slices ready.</li>
		<li>Transfer the slices into the recording chamber, submerging them into oxygenized artificial cerebrospinalfluid (ACSF) containing 125 mM sodium chloride (NaCl), 3 mM potassium chloride (KCl), 1.25 mM di hydrogen sodium phosphate (NaH2PO4), 25 mM sodium bicarbonate (NaHCO3), 2 mM calcium chloride (CaCl2), 1 mM magnesium chloride (MgCl2), 10 mM glucose (pH 7.3, 303 mOsm/L), supplemented with 0.5 mM sodium pyruvate, 2.8 mM sodium ascorbate and 0.005 mM glutathione. Use a flow rate of 1&#8211;2 mL/min. Keep the bath temperature at 28&#8211;30 &#176;C.</li>
		<li>Locate the dorsal striatum under a 20x water immersion objective. Fix the slices with a nylon grid on a platinum harp to minimize the tissue movement. Switch to the 63x /NA 1.0 water immersion objective. Select filters reflecting light at 473 nm (dichroic mirror) and passing light with wavelengths &#62;510 nm (emission filter).</li>
		<li>Synchronize illumination, stimulation and image acquisition using an Analog-to-Digital (AD)/Digital-to-Analog (DA) (AD/DA) board with the respective control software. Set the trigger program to control acquisition with a laser exposure time of 180 ms and an image acquisition time of 160 ms. Use the laser positioning device to send the laser beam to a predetermined number of points and define the settings for Scanning velocity and Spot size.</li>
		<li>Acquire an image of both autofluorescence and iGluu-positive structures using a high pass filter at 510 nm (&#34;yellow image&#34;).</li>
		<li>Acquire an image with autofluorescence alone using a high-pass filter at 600 nm (&#34;red image&#34;).</li>
		<li>Scale the red and yellow images, using the mean intensities of the 10 brightest and the 10 darkest pixels to define the range. Perform a subtraction &#34;yellow minus red image&#34; and rescale the subtracted image to generate a standard 8-bit tif file for convenient visualization of the bouton of interest (Figure 1D). It contains the bright pixels from the iGluu-positive structures, grey pixels from the background and dark pixels from structures with autofluorescence. 
		NOTE: With the given equipment the mean resting fluorescence (F) will be below 700 A.U.</li>
	</ol>
	</li>
	<li>Bouton search mode 
	NOTE: iGluu-positive pixels may belong to functionally different elements of the axonal tree, such as axon branches of different order, sites of bifurcation, varicosities after vesicle depletion or fully active varicosities. However, it is almost impossible to identify functional synaptic terminals just by visual inspection. Therefore, each glutamatergic synaptic terminal needs identification by its responsiveness to electrical depolarization. Sites that do not respond to stimulation have to be discarded. The physiological means to induce glutamate release from corticostriatal axons is to elicit an action potential. This can either be achieved by using a channel rhodopsin of appropriate spectral characteristics or by electrical stimulation of an axon visualized by iGluu itself. To avoid accidental opsin activation, we preferred the latter approastep
	<ol>
		<li>Use the micropipette puller (in a four-step mode) to produce stimulation pipettes from borosilicate glass capillaries. The internal tip diameter should be about 1 &#181;m. When filled with ACSF, the electrode resistance should be about 10 M&#937;.</li>
		<li>To induce the action potential-dependent release of glutamate from a set of synaptic boutons attached to the same axon, use 63x magnification, the 510 nm emission filter and the subtracted image to place a glass stimulation electrode next to a fluorescent varicosity. Avoid the proximity of additional axons.</li>
		<li>Turn on the stimulator to deliver depolarizing current pulses to the stimulation pipette. Use current intensities around 2 &#181;A (no more than 10 &#181;A).</li>
		<li>Turn on the multi-channel bath application system where one channel delivers the standard bath solution and the other channels deliver the necessary blockers of ion channels, transporters or membrane receptors. Control the flow at the site of recording and then switch to the tetrodotoxin (TTX) channel (bath solution plus 1 &#181;M TTX). After 2&#8211;3 min, stimulate the bouton of interest again, but now in the absence of action potential generation. The release is directly due to calcium influx through voltage-depended calcium channels.</li>
		<li>By turning the intensity key on the stimulator, adjust the stimulation current to obtain responses similar to those elicited via action potentials. Typically, the stimulation current would be around 6 &#181;A for a 0.5 ms depolarization.</li>
		<li>For basic testing of the preparation, apply 0.5 mM CdCl2. The presence of this calcium channel blocker glutamate release completely prevents the synaptic glutamate release thereby validating the calcium dependence of the directly evoked glutamate signal. 
		NOTE: The following general recommendation may help to increase the success rate of single synapse experiments in the striatum. To select glutamatergic synaptic terminals with intact release machinery, a varicosity should: (i) Have a smooth spindle-like shape; (ii) Not be associated with an axon bifurcation; (iii) Be brighter than other structures on the &#34;yellow image&#34;; (iv) Reside in the striatal neuropil rather than in the fiber tracts; (v) Reside on a very thin axon branch; (vi) Not reside within the deeper parts of the slice.</li>
	</ol>
	</li>
</ol>
3. Visualization of Glutamate Release and Clearance
<ol>
	<li>Recording mode 
	NOTE: After the subtraction of the autofluorescence (step 2.2) and a few initial tests for responsiveness of the bouton of interest (Step 2.3), data acquisition can begin. The responses to electrical activation of glutamate release from single axon terminals can be observed in the image directly (Figure 2), without applying further analysis tools. However, it proved to be very convenient to immediately extract some basic indicators of synapse performance (Figure 3). This information is needed to make decisions on subsequent course of experiment, such as selection of particular terminal types, rapid assessment of HD-related alterations, the number and frequency of trials or drugs to be applied with the superfusion system. It might also be necessary to deal with eventually appearing artifacts. First, the standard settings for data recording is described.
	<ol>
		<li>Using the microscope XY drives, place the tested iGluu-positive bouton close to the viewfield center. Stop the image acquisition with the Abort acquisition button. On the last acquired picture, determine the XY position of the resting bouton center by clicking on it with the left mouse button. The XY coordinates of the set cursor will be shown on the bottom status panel of the acquisition window.</li>
		<li>Using the calibration data (step 2.1.6), calculate the coordinates of the site where the laser beam should be sent for the excitation of the iGluu fluorescence. Use the following equations: X laser = X camera * X factor + X offset, Y laser = Y offset &#8211; Y camera * Y factor. While performing this recalculation, pay attention to the vertical or horizontal flip settings of the camera.</li>
		<li>Create a one-point sequence in the laser control software using the calculated coordinates. For this purpose, select Point in the Add to sequence box on the Sequence page of the laser control software. Select 10 &#181;s for the delay to trigger onset and 180 ms for the laser pulse time. Move the mouse to the calculated coordinates and click left button.</li>
		<li>Select the following settings in the laser control software: Runs: 0, Run delay: 0, Sequence: Run at TTL. Then click Start sequence.</li>
		<li>In the camera control software, select the following settings: On the Binning/ROI page, set Image Area: Custom, Pixel Binning: 2x2, Height: 20, Width: 20, Left: X-coordinate of the resting iGluu-positive spot minus 10 px, Bottom: Y-coordinate of the resting iGluu-positive spot minus 10 px, Acquisition Mode: Kinetic Series, Kinetic Series Length: 400, Exposure Time: 0.0003744s (minimal value). With such settings, the acquisition rate will be 2.48 kHz.</li>
		<li>Select Trigger mode: External. Click Take signal in the camera control software. Initiate the experimental protocol laid down for the trigger device.</li>
		<li>Implement the experimental protocol Trial with the following time line: 0 ms &#8211; start trial, 1 ms &#8211; start laser illumination, 20 ms &#8211; start image acquisition with camera, 70 ms &#8211; start electrical stimulation 1, 120 &#8211; start electrical stimulation 2, 181 ms &#8211; end trial (laser and camera off). Thus, during one trial the camera acquires 400 frames with a frequency of 2.48 kHz. See steps 2.3.3 and 2.3.5. for details on electrical stimulation.</li>
		<li>To allow for sufficient recovery of presynaptic vesicle pools, apply the protocol Trial with a repetition frequency of 0.1 Hz or lower.</li>
	</ol>
	</li>
	<li>Off-line construction of the glutamate transient and rapid assessment of glutamate release and clearance for the identification of pathological synapses
	<ol>
		<li>Turn on the evaluation routines. Here, we use an in-house-written software SynBout v. 3.2. (author: Anton Dvorzhak). The following steps are needed to construct a &#916;F/F transient from the pixels with elevated iGluu fluorescence as in the video of Figure 2.</li>
		<li>To determinate the bouton size, calculate the mean and standard deviation (SD) of the ROI fluorescence intensity at rest (F), before the onset of stimulation. Determine and box the area occupied by pixels with F&#62;mean + 3 SD (Figure 3A). Determine a virtual diameter (in &#181;m) assuming a circular form of the supra-threshold area.</li>
		<li>Determine &#916;F as the difference between the peak intensity value and F. Plot the stimulating current and &#916;F/F against time (Figure 3B). Calculate the SD of &#916;F/F at rest (before the onset of stimulation) and the &#34;Peak amplitude&#34;. Use pixel with peak amplitude more than 3 SD of &#916;F/F to perform monoexponential fitting for the decay from peak. Determine the time constant of decay TauD of &#916;F/F.</li>
		<li>To estimate the &#34;Maximal amplitude&#34; at a given synapse, select the pixel with the highest &#916;F/F value. It is typically located within or next to the boundaries of the resting bouton iGluu fluorescence. The &#34;Maximal amplitude&#34; would be the best indicator of the glutamate load presented to the clearance machinery of a single synapse.</li>
	</ol>
	</li>
</ol>

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Stereo microsope</td>
			<td>WPI</td>
			<td>PZMIII</td>
			<td>Precision Stereo Zoom Binocular Microscope</td>
		</tr>
		<tr>
			<td>Stereotaxic frame</td>
			<td>Stoelting</td>
			<td>51500D</td>
			<td>Digital Lab New Standard stereotaxic frame</td>
		</tr>
		<tr>
			<td>High speed drill equipment</td>
			<td>Stoelting</td>
			<td>514439V</td>
			<td>Foredom K1070 cromoter Kit</td>
		</tr>
		<tr>
			<td>Injection system</td>
			<td>Stoelting</td>
			<td>53311</td>
			<td>Quintessential Stereotaxic Injector (QSI)</td>
		</tr>
		<tr>
			<td>Hamilton syringe 5 &#181;l</td>
			<td>Hamilton</td>
			<td>87930</td>
			<td>75RN Syr (26s/51/2)</td>
		</tr>
		<tr>
			<td>Laser positioning system</td>
			<td>Rapp OptoElectronic</td>
			<td>UGA-40</td>
			<td>UGA-40</td>
		</tr>
		<tr>
			<td>Blue laser for iGluu excitation</td>
			<td>Rapp OptoElectronic</td>
			<td>DL-473-020-S</td>
			<td>473 nm laser</td>
		</tr>
		<tr>
			<td>Dichroic mirror for 473 nm</td>
			<td>Rapp OptoElectronic</td>
			<td>ROE TB-355-405-473</td>
			<td>Dichroic</td>
		</tr>
		<tr>
			<td>1P upright microscope</td>
			<td>Carl Zeiss</td>
			<td>000000-1066-600</td>
			<td>Axioskop 2 FS Plus</td>
		</tr>
		<tr>
			<td>Objective 63x/1.0</td>
			<td>Carl Zeiss</td>
			<td>421480-9900</td>
			<td>W Plan-Apochromat</td>
		</tr>
		<tr>
			<td>4x objective</td>
			<td>Carl Zeiss</td>
			<td>44-00-20</td>
			<td>Achroplan 4x/0,10</td>
		</tr>
		<tr>
			<td>Dichroic mirror for iGluu</td>
			<td>Omega optical</td>
			<td>XF2030</td>
			<td></td>
		</tr>
		<tr>
			<td>Emission filter for iGluu</td>
			<td>Omega optical</td>
			<td>XF3086</td>
			<td></td>
		</tr>
		<tr>
			<td>Dichroic mirror</td>
			<td>Omega optical</td>
			<td>QMAX_DI580LP</td>
			<td></td>
		</tr>
		<tr>
			<td>Emission filter for autofluorescence subtr.</td>
			<td>Omega optical</td>
			<td>QMAX EM600-650</td>
			<td></td>
		</tr>
		<tr>
			<td>sCMOS camera</td>
			<td>Andor</td>
			<td>ZYLA4.2PCL10</td>
			<td>ZYLA 4.2MP Plus</td>
		</tr>
		<tr>
			<td>Acqusition software</td>
			<td>Andor</td>
			<td>4.30.30034.0</td>
			<td>Solis</td>
		</tr>
		<tr>
			<td>AD/DA converter</td>
			<td>HEKA Elektronik</td>
			<td>895035</td>
			<td>InstruTECH LIH8+8</td>
		</tr>
		<tr>
			<td>Aquisition software</td>
			<td>HEKA Elektronik</td>
			<td>895153</td>
			<td>TIDA5.25</td>
		</tr>
		<tr>
			<td>Electrode positioning system</td>
			<td>Sutter Instrument</td>
			<td>MPC-200</td>
			<td>Micromanipulator</td>
		</tr>
		<tr>
			<td>Electrical stimulator</td>
			<td>Charite workshops</td>
			<td>STIM-26</td>
			<td></td>
		</tr>
		<tr>
			<td>Slicer</td>
			<td>Leica</td>
			<td>VT1200 S</td>
			<td>Vibrotome</td>
		</tr>
		<tr>
			<td>Brown/Flaming-type puller</td>
			<td>Sutter Instr</td>
			<td>SU-P1000</td>
			<td>P-1000</td>
		</tr>
		<tr>
			<td>Glass tubes for injection pipettes</td>
			<td>WPI</td>
			<td>1B100F3</td>
			<td></td>
		</tr>
		<tr>
			<td>Glass tubes forstimulation pipettes</td>
			<td>WPI</td>
			<td>R100-F3</td>
			<td></td>
		</tr>
		<tr>
			<td>Tetrodotoxin</td>
			<td>Abcam</td>
			<td>ab120054</td>
			<td>TTX</td>
		</tr>
		<tr>
			<td>iGluu plasmid</td>
			<td>Addgene</td>
			<td>106122</td>
			<td>pCI-syn-iGluu</td>
		</tr>
		<tr>
			<td>Q175 mice</td>
			<td>Jackson Lab</td>
			<td>27410</td>
			<td>Z-Q175-KI</td>
		</tr>
	</tbody>
</table>

analyzing the glutamate release and clearance at a single neuron synapse in a mouse brain slice

Source: Dvorzhak, A. et al., <a href="https://app-jove-com.remotexs.ntu.edu.sg/v/60113">Single Synapse Indicators of Glutamate Release and Uptake in Acute Brain Slices from Normal and Huntington Mice.</a> J. Vis. Exp. (2020)
This video demonstrates evaluating glutamate release and clearance at single corticostriatal synapses in a mouse brain slice. Electrical stimulation facilitates glutamate release at the synapse. The released glutamate alters sensor protein&#39;s fluorescence, which decays over time, indicating release and clearance efficiency.

<img alt="Figure 1" src="/files/ftp_upload/22733/22733_Figure1.jpg" /> 
Figure 1: Identification of iGluu-positive varicosities. (A) Fluorescence image obtained with a 510 nm high pass filter (&#34;yellow image&#34;). (B) Same view field acquired with a 600 nm high pass filter (&#34;red image&#34;). Note that that the spot marked with black arrowhead has disappeared in (B). Overlay of (A) and (B). White arrow = autofluorescence, black arrow = iGluu-positive varicosity. (D) Image obtained by subtraction of (B) from (A). The autofluorescent spots are dark and the iGluu+ spot is bright.
<img alt="Figure 2" src="/files/ftp_upload/22733/22733_Figure2.jpg" /> 
Figure 2: Movie still from a slow-motion video (slowdown factor 1240x). Upper row: Images from WT (left), Q175 HET (middle) and HOM (right). Lower row: Respective iGluu transients from the pixel with the highest glutamate elevation (Maximal &#916;F/F). The red cursor indicates the point on the transient corresponding to the image above the trace. note prolonged elevation of iGluu fluorescence (red pixels and &#916;F/F transients). Modified and reprinted with permission from Dvorzhak et al.
<img alt="Figure 3" src="/files/ftp_upload/22733/22733_Figure3.jpg" /> 
Figure 3: Extraction of functional indicators from single synapse images of the genetically encoded ultrafast Glu sensor iGluu in corticostriatal neurons. (A, D) Example of a PT (A) and IT (D) bouton with the respective iGluu fluorescence at rest (left) and at the peak of an AP-mediated iGluu response (right). (B, C, E, F) iGluu responses recorded from the bouton shown in (A, D); Experiment in 2 mM Ca2+ and 1 mM Mg2+. (B) Simultaneous recording of the stimulation current (upper trace) and mean intensity of supra-threshold pixels (bottom trace). Same time scale for all traces. Peak amplitudes (between dotted red horizontal lines) and a monoexponential function fitted to the decay from this peak (red overlay). The corresponding TauD (&#964;) values are shown next to the fitting curves. (E, F) Plot of spread against time. Peak spread: difference between dotted red horizontal lines.

Analyzing the Glutamate Release and Clearance at a Single Neuron Synapse in a Mouse Brain Slice

All procedures involving sample collection have been performed in accordance with the institute&#39;s IRB guidelines.
NOTE: Recordings from Q175 wild-type ...

Begin with an electrophysiology setup containing a mouse forebrain slice submerged in an oxygenated aCSF.
aCSF contains an ion-channel blocker that selectively inhibits the sodium-ion channels, preventing sodium-induced neuronal excitation.
The cortical neurons express fluorescent glutamate-detection sensor proteins.
Locate a single presynaptic neuron axonal bouton capable of releasing glutamate, an excitatory neurotransmitter, at the synapse, a junction where it connects with postsynaptic neurons.
Position a stimulation electrode near this bouton and apply depolarizing currents.
This excites the presynaptic neuron, causing a calcium ion influx and facilitating glutamate release.
Start fluorescence intensity recording around the selected bouton.
The released glutamate interacts with the sensor proteins and receptors on post-synaptic neurons.
Meanwhile, illuminate the selected area with laser light, causing the glutamate-bound sensor proteins to fluoresce; an increasing fluorescence intensity indicates glutamate release.
Over time, glutamate dissociates from the sensor proteins and enters the astrocyte, causing a decrease in fluorescence intensity, indicating glutamate clearance.

analyzing-glutamate-release-clearance-at-single-neuron-synapse-mouse

Nanyang Technological University

Research

JoVE Encyclopedia of Experiments

Neuroscience

Neurophysiology

Electrophysiology Techniques

54 조회수. 출처: Dvorzhak, A. et al., Normal and Huntington Mice의 급성 뇌 절편에서 글루타메이트 방출 및 흡수의 단일 시냅스 지표. J. Vis. 특급 (2020) 이 비디오는 쥐의 뇌 절편에서 단일 피질 시냅스에서 글루타메이트 방출 및 청소를 평가하는 방법을 보여줍니다. 전기 자극은 시냅스에서 글루타메이트 방출을 촉진합니다. 방출된 글루타메이트는 시간이 지남에 따라 감소하는 센서 단백질의 형광?...

비디오: Analyzing the Glutamate Release and clearance at a single neuroron synapse(마우스 뇌 절편의 단일 뉴런 시냅스에서 글루타메이트 방출 및 청소) - 개념

Visualization of Thalamocortical Axon Branching and Synapse Formation in Organotypic Cocultures

Axon branching and synapse formation are crucial processes for establishing precise neuronal circuits. During development, sensory thalamocortical (TC) axons form branches and synapses in specific layers of the cerebral cortex. Despite the obvious spatial correlation between axon branching and synapse formation, the causal relationship between them is poorly understood. To address this issue, we recently developed a method for simultaneous imaging of branching and synapse formation of individual TC axons in organotypic cocultures.
This protocol describes a method which consists of a combination of an organotypic coculture and electroporation. Organotypic cocultures of the thalamus and cerebral cortex facilitate gene manipulation and observation of axonal processes, preserving characteristic structures such as laminar configuration. Two distinct plasmids encoding DsRed and EGFP-tagged synaptophysin (SYP-EGFP) were co-transfected into a small number of thalamic neurons by an electroporation technique. This method allowed us to visualize individual axonal morphologies of TC neurons and their presynaptic sites simultaneously. The method also enabled long-term observation which revealed the causal relationship between axon branching and synapse formation.

This protocol describes a method for simultaneous imaging of thalamocortical axon branching and synapse formation in organotypic cocultures of the thalamus and cerebral cortex. Individual thalamocortical axons and their presynaptic terminals are visualized by a single cell electroporation technique with DsRed and GFP-tagged synaptophysin.

분기 Thalamocortical 축 삭과 시 냅 스의 시각화 Organotypic Cocultures에서 형성

Axon branching and synapse formation are crucial processes for establishing precise neuronal circuits. During development, sensory thalamocortical (TC) ...

연구

JoVE Journal

신경과학

A Plate-Based Assay for the Measurement of Endogenous Monoamine Release in Acute Brain Slices

Monoamine neurotransmitters are associated with numerous neurologic and psychiatric ailments. Animal models of such conditions have shown alterations in monoamine neurotransmitter release and uptake dynamics. Technically complex methods such as electrophysiology, Fast Scan Cyclic Voltammetry (FSCV), imaging, in vivo&#160;microdialysis, optogenetics, or use of radioactivity are required to study monoamine function. The method presented here is an optimized two-step approach for detecting monoamine release in acute brain slices using a 48-well plate containing tissue holders for examining monoamine release, and high-performance liquid chromatography coupled with electrochemical detection (HPLC-ECD) for monoamine release measurement. Briefly, rat brain sections containing regions of interest, including prefrontal cortex, hippocampus, and dorsal striatum were obtained using a tissue slicer or vibratome. These regions of interest were dissected from the whole brain and incubated in an oxygenated physiological buffer. Viability was examined throughout the experimental time course, by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The acutely dissected brain regions were incubated in varying drug conditions that are known to induce monoamine release through the transporter (amphetamine) or through the activation of exocytotic vesicular release (KCl). After incubation, the released products in the supernatant were collected and analyzed through an HPLC-ECD system. Here, basal monoamine release is detected by HPLC from acute brain slices. This data supports previous in vivo and in vitro results showing that AMPH and KCl induce monoamine release. This method is particularly useful for studying mechanisms associated with monoamine transporter-dependent release and provides an opportunity to screen compounds affecting monoamine release in a rapid and low-cost manner.

This method introduces a simple technique for the detection of endogenous monoamine release using acute brain slices. The setup uses a 48-well plate containing a tissue holder for monoamine release. Released monoamine is analyzed by HPLC coupled with electrochemical detection. Additionally, this technique provides a screening method for drug discovery.

급성 뇌 슬라이스에서 내인성 모아민 방출 측정을 위한 판 기반 분석

Monoamine neurotransmitters are associated with numerous neurologic and psychiatric ailments. Animal models of such conditions have shown alterations in ...

Imaging Mitochondrial Ca2+ Uptake in Astrocytes and Neurons using Genetically Encoded Ca2+ Indicators (GECIs)

Mitochondrial Ca2+ plays a critical role in controlling cytosolic Ca2+ buffering, energy metabolism, and cellular signal transduction. Overloading of mitochondrial Ca2+ contributes to various pathological conditions, including neurodegeneration and apoptotic cell death in neurological diseases. Here we present a cell-type specific and mitochondria targeting molecular approach for mitochondrial Ca2+ imaging in astrocytes and neurons in vitro and in vivo. We constructed DNA plasmids encoding mitochondria-targeting genetically encoded Ca2+ indicators (GECIs) GCaMP5G or GCaMP6s (GCaMP5G/6s) with astrocyte- and neuron-specific promoters gfaABC1D and CaMKII and mitochondria-targeting sequence (mito-). For in vitro mitochondrial Ca2+ imaging, the plasmids were transfected in cultured astrocytes and neurons to express GCaMP5G/6s. For in vivo mitochondrial Ca2+ imaging, adeno-associated viral vectors (AAVs) were prepared and injected into the mouse brains to express GCaMP5G/6s in mitochondria in astrocytes and neurons. Our approach provides a useful means to image mitochondrial Ca2+ dynamics in astrocytes and neurons to study the relationship between cytosolic and mitochondrial Ca2+ signaling, as well as astrocyte-neuron interactions.

Imaging Mitochondrial Ca2+ Uptake in Astrocytes and Neurons using Genetically Encoded Ca2+ Indicators GECIs

This proctocol aims to provide a method for in vitro and in vivo mitochondrial Ca2+ imaging in astrocytes and neurons.

유전자 인코딩 된 Ca2 + 지표 (GECIs)를 사용하여 성상 세포와 뉴런에서 이미징 미토콘드리아 Ca2 + 섭취

Mitochondrial Ca2+ plays a critical role in controlling cytosolic Ca2+ buffering, energy metabolism, and cellular signal transduction. Overloading of ...

Analyzing the Glutamate Release and Clearance at a Single Neuron Synapse in a Mouse Brain Slice

내레이션 대본

Analyzing the Glutamate Release and Clearance at a Single Neuron Synapse in a Mouse Brain Slice