サインイン

第 32 章

交流回路

AC電源
AC電源
Direct current is a flow of electric charge in only one direction and has a steady state of constant voltage in the circuit. Rectifiers, batteries, ...
AC回路のRMS値
AC回路のRMS値
The root mean square (RMS) value is a measure of the effective or average value of an alternating current (AC) waveform. In AC circuits, the voltage or ...
AC回路の抵抗器
AC回路の抵抗器
An alternating emf or voltage source is needed to supply an alternating current (AC) to a circuit. A coil of wire rotating in a magnetic field at a ...
AC回路のコンデンサ
AC回路のコンデンサ
A capacitor is charged by passing an electric current through it, which causes the plates to start accumulating an electrostatic charge. Since the ...
AC回路のインダクタ
AC回路のインダクタ
The basic components of an inductor are coils or loops of wire that are either wound around a hollow tube former or a ferromagnetic material (iron-cored) ...
RLCシリーズ回路:はじめに
RLCシリーズ回路:はじめに
Consider an RLC series circuit consisting of a resistor, an inductor, and a capacitor connected to an AC voltage source. A current, which varies ...
RLCシリーズ回路:インピーダンス
RLCシリーズ回路:インピーダンス
When current flow is opposed in a DC or AC circuit, it is referred to as resistance or impedance, respectively. Impedance plays a key role in determining ...
RLCシリーズ回路:問題解決
RLCシリーズ回路:問題解決
Consider an AC generator with a frequency of 50 hertz and a voltage of 120 volts. The AC generator is connected to an RLC series circuit with a 20-ohms ...
AC回路の電源
AC回路の電源
In a DC circuit, the power consumed is simply the product of the DC voltage times the DC current, given in watts. However, the power consumed for AC ...
AC回路の共振
AC回路の共振
The property of an inductor makes it resist any change in the current passing through it, while the property of a capacitor is to build up the charge ...
トランスフォーマー
トランスフォーマー
A device that transforms voltages from one value to another using induction is called a transformer. A transformer consists of two separate coils, or ...
変圧器の種類
変圧器の種類
Transformers can provide desired voltages to a circuit by modifying the number of turns in the secondary windings. If the ratio of the number of turns in ...
変圧器のエネルギー損失
変圧器のエネルギー損失
In an ideal transformer, it is assumed that there are no energy losses, and, hence, all the power at the primary winding is transferred to the secondary ...
JoVE Logo

個人情報保護方針

利用規約

一般データ保護規則

研究

教育

JoVEについて

Copyright © 2023 MyJoVE Corporation. All rights reserved