עבודה זו נתמכה על ידי מענקים מהלאומיים ללב וריאות המכון (R01 HL086582) ותאי גזע מדע קרן ניו יורק (NYSTEM, # חוזה &#160; C024316) לSTA ואיורים DDS משמשים בוידאו יופיטר הושלמו על ידי ג &#39;ון נייקוויסט; Illustrator הרפואי מאוניברסיטת מדינת ניו יורק בבאפלו.

<ol>
	<li>Goldman, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Long-term+patency+of+saphenous+vein+and+left+internal+mammary+artery+grafts+after+coronary+artery+bypass+surgery:+Results+from+a+Department+of+Veterans+Affairs+Cooperative+Study.">Long-term patency of saphenous vein and left internal mammary artery grafts after coronary artery bypass surgery: Results from a Department of Veterans Affairs Cooperative Study.</a> Journal of the American College of Cardiology. 44, 2149-2156 (2004).</li><li>Achouh, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Long-term+(5-+to+20-year)+patency+of+the+radial+artery+for+coronary+bypass+grafting.">Long-term (5- to 20-year) patency of the radial artery for coronary bypass grafting.</a> The Journal of Thoracic And Cardiovascular Surgery. 140, 73-79 (2010).</li><li>Conklin, B. S., Richter, E. R., Kreutziger, K. L., Zhong, D. S., Chen, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+and+evaluation+of+a+novel+decellularized+vascular+xenograft.">Development and evaluation of a novel decellularized vascular xenograft.</a> Medical Engineering &amp; Physics. 24, 173-183 (2002).</li><li>Zhu, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+anti-atherosclerotic+tissue-engineered+blood+vessel+by+A20-regulated+endothelial+progenitor+cells+seeding+decellularized+vascular+matrix.">Development of anti-atherosclerotic tissue-engineered blood vessel by A20-regulated endothelial progenitor cells seeding decellularized vascular matrix.</a> Biomaterials. 29, 2628-2636 (2008).</li><li>Quint, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Decellularized+tissue-engineered+blood+vessel+as+an+arterial+conduit.">Decellularized tissue-engineered blood vessel as an arterial conduit.</a> Proceedings of the National Academy of Sciences. 108, 9214-9219 (2011).</li><li>Kaushal, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+small-diameter+neovessels+created+using+endothelial+progenitor+cells+expanded+ex+vivo.">Functional small-diameter neovessels created using endothelial progenitor cells expanded ex vivo.</a> Nat Med. 7, 1035-1040 (2001).</li><li>Galatos, A. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anesthesia+and+Analgesia+in+Sheep+and+Goats.">Anesthesia and Analgesia in Sheep and Goats.</a> Veterinary Clinics of North America: Food Animal Practice. 27, 47-59 (2011).</li><li>Okutomi, T., Whittington, R. A., Stein, D. J., Morishima, H. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+the+effects+of+sevoflurane+and+isoflurane+anesthesia+on+the+maternal-fetal+unit+in+sheep.">Comparison of the effects of sevoflurane and isoflurane anesthesia on the maternal-fetal unit in sheep.</a> J Anesth. 23, 392-398 (2009).</li><li>Swartz, D. D., Russell, J. A., Andreadis, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+of+fibrin-based+functional+and+implantable+small-diameter+blood+vessels.">Engineering of fibrin-based functional and implantable small-diameter blood vessels.</a> American Journal of Physiology - Heart and Circulatory Physiology. 288, H1451-H1460 (2005).</li><li>Niklason, L. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+arteries+grown+in+vitro.">Functional arteries grown in vitro.</a> Science. 284, 489-493 (1999).</li><li>Dahl, S. L. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Readily+Available+Tissue-Engineered+Vascular+Grafts.">Readily Available Tissue-Engineered Vascular Grafts.</a> Science Translational Medicine. 3, 68ra69 (2011).</li><li>Wu, W., Allen, R. A., Wang, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fast-degrading+elastomer+enables+rapid+remodeling+of+a+cell-free+synthetic+graft+into+a+neoartery.">Fast-degrading elastomer enables rapid remodeling of a cell-free synthetic graft into a neoartery.</a> Nature Medicine. 18, 1148-1153 (2012).</li><li>Saami, K. Y., Bryan, W. T., Joel, L. B., Shay, S., Randolph, L. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+fate+of+an+endothelium+layer+after+preconditioning.">The fate of an endothelium layer after preconditioning.</a> Journal of vascular surgery : Official Publication, the Society for Vascular Surgery [and] International Society for Cardiovascular Surgery, North American Chapter. 51, 174-183 (2010).</li><li>Ueberrueck, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+the+ovine+and+porcine+animal+models+for+biocompatibility+testing+of+vascular+prostheses.">Comparison of the ovine and porcine animal models for biocompatibility testing of vascular prostheses.</a> Journal of Surgical Research. 124, 305-311 (2005).</li><li>Labb&#233;, R., Germain, L., Auger, F. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+completely+biological+tissue-engineered+human+blood+vessel.">A completely biological tissue-engineered human blood vessel.</a> The FASEB Journal. 12, 47-56 (1998).</li><li>Samaha, F. J., Oliva, A., Buncke, G. M., Buncke, H. J., Siko, P. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+clinical+study+of+end-to-end+versus+end-to-side+techniques+for+microvascular+anastomosis.">A clinical study of end-to-end versus end-to-side techniques for microvascular anastomosis.</a> Plastic and Reconstructive Surgery. 99, 1109-1111 (1997).</li><li>Huang, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+end-to-side+anastomosis+technique+for+hepatic+rearterialization+in+rat+orthotopic+liver+transplantation+to+accommodate+size+mismatches+between+vessels.">A novel end-to-side anastomosis technique for hepatic rearterialization in rat orthotopic liver transplantation to accommodate size mismatches between vessels.</a> European Surgical Research. 47, 53-62 (2011).</li><li>Peng, H., Schlaich, E. M., Row, S., Andreadis, S. T., Swartz, D. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Novel+Ovine+ex+vivo+Arteriovenous+Shunt+Model+to+Test+Vascular+Implantability.">A Novel Ovine ex vivo Arteriovenous Shunt Model to Test Vascular Implantability.</a> Cells, Tissues, Organs. 195, 108 (2011).</li><li>Zilla, P., Bezuidenhout, D., Human, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prosthetic+vascular+grafts:+Wrong+models,+wrong+questions+and+no+healing.">Prosthetic vascular grafts: Wrong models, wrong questions and no healing.</a> Biomaterials. 28, 5009-5027 (2007).</li><li>Berger, K., Sauvage, L. R., Rao, A. M., Wood, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Healing+of+Arterial+Prostheses+in+Man:+Its+Incompleteness.">Healing of Arterial Prostheses in Man: Its Incompleteness.</a> Annals of Surgery. 175, 118-127 (1972).</li><li>Byrom, M. J., Bannon, P. G., White, G. H., Ng, M. K. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Animal+models+for+the+assessment+of+novel+vascular+conduits.">Animal models for the assessment of novel vascular conduits.</a> Journal of Vascular Surgery : Official Publication, the Society for Vascular Surgery [and] International Society for Cardiovascular Surgery, North American Chapter. 52, 176-195 (2010).</li><li>Swartz, D. D., Andreadis, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Animal+models+for+vascular+tissue-engineering.">Animal models for vascular tissue-engineering.</a> Current Opinion in Biotechnology. 24, 916-925 (2013).</li><li>Liang, M. -. S., Andreadis, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+fibrin-binding+TGF-&#946;1+for+sustained+signaling+and+contractile+function+of+MSC+based+vascular+constructs.">Engineering fibrin-binding TGF-&#946;1 for sustained signaling and contractile function of MSC based vascular constructs.</a> Biomaterials. 32, 8684-8693 (2011).</li><li>Han, J., Liu, J. Y., Swartz, D. D., Andreadis, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+and+functional+effects+of+organismal+ageing+on+smooth+muscle+cells+derived+from+bone+marrow+mesenchymal+stem+cells.">Molecular and functional effects of organismal ageing on smooth muscle cells derived from bone marrow mesenchymal stem cells.</a> Cardiovascular Research. 87, 147-155 (2010).</li></ol>

There are no disclosures to report.

מטרת דו&quot;ח זה היא לספק הליך אמין ושחזור לTEVs שתל של עניין בעורק התרדמה כבש. עורקי ראש יליד בעלי החיים המשמשים במודל זה היו 0.5-.75 מ&quot;מ עובי ו4.5-5 מ&quot;מ בקוטר חיצוני. הטכניקה הניתוחית שתוארה כאן הייתה מוצלחת להשתלת TEVs של גיאומטריות שונות מדידת .25-1 מ&quot;מ עובי, 4-5 מ&quot;מ קוטר...

המוקד העיקרי לפיתוח TEVs היה לספק תחליף להחלפת שתל אוטולוגי כאשר כלי אוטולוגי אינם זמינים ולהגביל תחלואת מראה תורם. לדוגמא, מספר עוקף עורק כלילי ניתוחים בשנה חרג 350,000 בארה&quot;ב, והמקור האידיאלי של שתלים מתאימים נשאר העורק השמאלי הפנימי החלב הקדמי שמאלי, יורד בעורקים הכליליים ווריד saphenous 1. מאז אנשים רבים הסובלים ממחלות לב וכלי דם לא יכולים להיות מתאימים עורקים וורידים להחלפת שתל אוטולוגי, פיתוח TEVs נעשה אפוא שדה אינטנסיבי של מחקר במשך עשרות שנות 1-6. בעוד ההנדסה ואופטימיזציה של TEVs הרומן עברו התקדמות רבות, דיווחו על טכניקות כירורגיות המועסקות להשתיל TEVs עצמם לא היו נושא לדיון אינטנסיבי כזה. במקום זאת, פרוטוקולים בנוגע להשתלת TEVs למודלים של בעלי חיים הם במידה רבה עזבועד למחקר חוקרים. כתב היד הבאה מדגימה כיצד להשתיל TEVs על ידי ניצול גישת השקה קצה לקצה. הליך זה היה מותאם על ידי שימוש בתבנית תפירה בהשקה ספציפית, ייצוב טכניקת תפר, אופטימיזציה של מתח אורך והתוספת של in vivo מכשור ניטור. שיטה זו עומדת בניגוד לכמה מהווריאציות רבות שהיה בשימוש בעבר. יתר על כן, הליך זה מתאר כיצד לרכוש פרמטרים כגון לחץ דם עורקים, TEV קוטר / עמידה וקצב הזרימה דרך TEV לאחר הניתוח עד explantation. איסוף נתונים זה מספק ניתוח הכרחי של TEV בזמן שהוא נמצא בתהליך של שיפוץ.

<table border="0" cellpadding="0" cellspacing="0" width="1505">
	<tbody>
		<tr height="43">
			<td dir="LTR" height="43" style="height:43px;width:335px;">Equipment</td>
			<td dir="LTR" style="width:208px;">Manufacturer</td>
			<td dir="LTR" style="width:311px;">Serial/Catalog #</td>
			<td dir="LTR" style="width:363px;">Notes</td>
		</tr>
		<tr height="56">
			<td dir="LTR" height="94" rowspan="2" style="height:94px;width:335px;">Pressure Transducer</td>
			<td dir="LTR" rowspan="2" style="width:208px;">Becton Dickinson</td>
			<td dir="LTR" rowspan="2" style="width:311px;">P23XL-1</td>
			<td dir="LTR" style="width:291px;">1+ (1 for each artery) 
			&#160;Used with water-filled diaphragm domes</td>
		</tr>
		<tr height="172">
			<td dir="LTR" height="172" style="height:172px;width:335px;">Amplifier and transducer box</td>
			<td dir="LTR" style="width:208px;">Gould</td>
			<td dir="LTR" style="width:311px;">5900 Signal Conditioner Cage</td>
			<td dir="LTR" style="width:291px;">1 
			Two transducers and amplifiers should be included in cage. While this specific unit may be discontinued, other commercially available pressure transducers with a BNC/analog output will communicate with the Sonometrics equipment</td>
		</tr>
		<tr height="121">
			<td dir="LTR" height="121" style="height:121px;width:335px;">T403 Console with TS420 perivascular flowmeter module(x2)&#160;</td>
			<td dir="LTR" style="width:208px;">Transonic Systems</td>
			<td dir="LTR" style="width:311px;">T403 module and TS420 (x2)</td>
			<td dir="LTR" style="width:291px;">1 
			Flow probes measuring flow through each of the carotid arteries will connect to each of the TS420 units.&#160;&#160;</td>
		</tr>
		<tr height="126">
			<td dir="LTR" height="126" style="height:126px;width:335px;">Digital ultrasonic measurement unit</td>
			<td dir="LTR" style="width:208px;">Sonometrics</td>
			<td dir="LTR" style="width:311px;">TR-USB</td>
			<td dir="LTR" style="width:291px;">1</td>
		</tr>
		<tr height="48">
			<td dir="LTR" height="48" style="height:48px;width:335px;">Flow Probe Precision S-Series 4mm</td>
			<td dir="LTR" rowspan="4" style="width:208px;">Transonic Systems Inc.</td>
			<td dir="LTR" rowspan="4" style="width:311px;">MC4PSS-LS-WC100-CM4B-GA</td>
			<td dir="LTR" rowspan="4" style="width:291px;">2</td>
			<td dir="LTR" rowspan="4" style="width:363px;"></td>
		</tr>
		<tr height="24">
			<td dir="LTR" height="49" rowspan="2" style="height:49px;width:335px;">1mm&#160; Sonometrics Crystals</td>
			<td dir="LTR" rowspan="2" style="width:208px;">Sonometrics Systems</td>
			<td dir="LTR" rowspan="2" style="width:311px;">1R-38S-20-NC-SH</td>
			<td dir="LTR" style="width:291px;">&#160;2-4 (2 for each artery)</td>
		</tr>
		<tr height="81">
			<td dir="LTR" height="134" rowspan="2" style="height:134px;width:335px;">Catheter for implantation</td>
			<td dir="LTR" style="width:208px;">BD (Becton Dickinson)</td>
			<td dir="LTR" rowspan="2" style="width:311px;">&#160;381447</td>
			<td dir="LTR" style="width:291px;">&#160;1+ (1 for each artery) 
			Catheter is cut and secured to microbore tubing, stylette is utilized for insertion&#160;</td>
		</tr>
		<tr height="24">
			<td dir="LTR" height="73" rowspan="2" style="height:73px;width:335px;">Tygon Microbore Tubing</td>
			<td dir="LTR" rowspan="2" style="width:208px;">Norton Performance Plastics</td>
			<td dir="LTR" style="width:311px;">(AAQ04127) Formulation S-54-HL</td>
			<td dir="LTR" style="width:291px;">NA (cut to length for an extension set)</td>
		</tr>
		<tr height="24">
			<td dir="LTR" height="49" rowspan="2" style="height:49px;width:335px;">Luer Stub Adapter</td>
			<td dir="LTR" style="width:208px;">BD (Becton Dickinson)</td>
			<td dir="LTR" style="width:311px;">427564 (20 gauge)</td>
			<td dir="LTR" style="width:291px;">1+ (1 for each arterial catheter)</td>
		</tr>
		<tr height="24">
			<td dir="LTR" height="82" rowspan="2" style="height:82px;width:335px;">Surflo Injection Plug</td>
			<td dir="LTR" rowspan="2" style="width:208px;">Terumo</td>
			<td dir="LTR" rowspan="2" style="width:311px;">SR-IP2</td>
			<td dir="LTR" style="width:291px;">1+ (1 for each arterial catheter)</td>
		</tr>
		<tr height="39">
			<td dir="LTR" height="128" rowspan="2" style="height:128px;width:335px;">Meadox</td>
			<td dir="LTR" rowspan="2" style="width:208px;">PTFE (Teflon) Felt</td>
			<td dir="LTR" rowspan="2" style="width:311px;">19306</td>
			<td dir="LTR" style="width:291px;">NA (cut to size) 
			The PTFE felt used in our studies was discontinued. However, comparable companies such as &#8220;Surgical Mesh&#8221; offer products which are equivalent.&#160;</td>
		</tr>
	</tbody>
</table>

surgical technique for the implantation of tissue engineered vascular grafts and subsequent in vivo monitoring

הפיתוח של כלי רקמה מהונדסת (TEVs) הוא מקדם את יכולת TEVs באופן שיגרתי וביעילות שתל (4-5 מ&quot;מ קוטר) למודל של בעלי חיים גדולים. פרוטוקול צעד אחר צעד למיקום בין-positional של ההערכה הדיגיטלית TEV וזמן אמת של TEV ועורקי ראש ילידים מתואר כאן. הניטור בvivo מתאפשר על ידי ההשתלה של זרימת בדיקות, צנתרים וגבישים קוליים (מסוגל רישום דינמי שינויים בקוטר של TEVs המושתל ועורקי ראש מקוריים) בזמן הניתוח. ברגע שהושתל, חוקרים יכולים לחשב דפוסי עורקי זרימת דם, לחץ דם פולשני וקוטר עורק מניב פרמטרים כגון מהירות גל דופק, מדד augmentation, לחצי דופק ועמידה. רכישת נתונים מושגת באמצעות תוכנת מחשב יחידה לניתוח לכל אורך הניסוי. הנתונים לא יסולא בפז כזו מספק תובנה שיפוץ מטריצת TEV, resemblanCE לבקרה מקומית / דמה וביצועי TEV הכוללים in vivo.

יותר מ -30 כבשים עברו את הטכניקה הניתוחית שתוארה בדוח זה להשתלת TEVs (in press) 9. טבלה המרכזת את פעילות הכבשים האחרונה לאחר פרוטוקול אופטימיזציה מוצגת בטבלה 2. כל הכבשים התאוששו לאחר השתלת TEV ללא סיבוכים מסכנים חיים. אצל בעלי חיים מסוימים, סיסטיק נצפה בעורק ילי?...

Watch this Scientific Journal Video about Surgical Technique for the Implantation of Tissue Engineered Vascular Grafts and Subsequent In Vivo Monitoring at JoVE.com

Surgical Technique for the Implantation of Tissue Engineered Vascular Grafts and Subsequent In Vivo Monitoring

פרוטוקול צעד-אחר-צעד למיקום בין-positional של כלי רקמה מהונדסת (TEVs) לעורק הראשי של כבשים באמצעות השקה והערכה דיגיטלית בזמן אמת מקצה-לקצה בvivo עד הקרבת בעלי חיים.

טכניקה כירורגית להשתלה של רקמות שתלי כלי דם מהונדסים ולאחר<em&gt; In vivo</em&gt; ניטור

The development of Tissue Engineered Vessels (TEVs) is advanced by the ability to routinely and effectively implant TEVs (4-5 mm in diameter) into a large ...

surgical-technique-for-implantation-tissue-engineered-vascular-grafts

Research

JoVE Journal

Bioengineering

Surgical Technique for the Implantation of Tissue Engineered Vascular Grafts and Subsequent In Vivo Monitoring

11.7K Views.  State University of New York Buffalo School of Medicine.  פרוטוקול צעד-אחר-צעד למיקום בין-positional של כלי רקמה מהונדסת (TEVs) לעורק הראשי של כבשים באמצעות השקה והערכה דיגיטלית בזמן אמת מקצה-לקצה בvivo עד הקרבת בעלי חיים. 

Video: Surgical Technique for the Implantation of Tissue Engineered Vascular Grafts and Subsequent In Vivo Monitoring

Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue (EHT)

Various techniques of cardiac tissue engineering have been pursued in the past decades including scaffolding strategies using either native or bioartificial scaffold materials, entrapment of cardiac myocytes in hydrogels such as fibrin or collagen and stacking of myocyte monolayers 1. These concepts aim at restoration of compromised cardiac function (e.g. after myocardial infarction) or as experimental models (e.g. predictive toxicology and substance screening or disease modelling). Precise monitoring of cell survival after implantation of engineered heart tissue (EHT) has now become possible using in-vivo bioluminescence imaging (BLI) techniques 2. Here we describe the generation of fibrin-based EHT from a transgenic rat strain with ubiquitous expression of firefly luciferase (ROSA/luciferase-LEW Tg; 3). Implantation is performed into the greater omentum of different rat strains to assess immune responses of the recipient organism following EHT implantation. Comparison of results generated by BLI and the Enzyme Linked Immuno Spot Technique (ELISPOT) confirm the usability of BLI for the assessment of immune responses.

Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue EHT

This video demonstrates the use of in vivo bioluminescence imaging to study immune responses after implantation of Engineered Heart Tissue (EHT) in rats.

פליטת אור הדמיה עבור הערכת התגובה החיסונית לאחר השתלת רקמת לב הנדסי (EHT)

Various techniques of cardiac tissue engineering have been pursued in the past decades including scaffolding strategies using either native or ...

Non-contact, Label-free Monitoring of Cells and Extracellular Matrix using Raman Spectroscopy

Non-destructive, non-contact and label-free technologies to monitor cell and tissue cultures are needed in the field of biomedical research.1-5 However, currently available routine methods require processing steps and alter sample integrity. Raman spectroscopy is a fast method that enables the measurement of biological samples without the need for further processing steps. This laser-based technology detects the inelastic scattering of monochromatic light.6 As every chemical vibration is assigned to a specific Raman band (wavenumber in cm-1), each biological sample features a typical spectral pattern due to their inherent biochemical composition.7-9 Within Raman spectra, the peak intensities correlate with the amount of the present molecular bonds.1 Similarities and differences of the spectral data sets can be detected by employing a multivariate analysis (e.g. principal component analysis (PCA)).10
Here, we perform Raman spectroscopy of living cells and native tissues. Cells are either seeded on glass bottom dishes or kept in suspension under normal cell culture conditions (37 &deg;C, 5% CO2) before measurement. Native tissues are dissected and stored in phosphate buffered saline (PBS) at 4 &deg;C prior measurements. Depending on our experimental set up, we then either focused on the cell nucleus or extracellular matrix (ECM) proteins such as elastin and collagen. For all studies, a minimum of 30 cells or 30 random points of interest within the ECM are measured. Data processing steps included background subtraction and normalization.

Raman spectroscopy is a suitable technique for the non-contact, label-free analysis of living cells, tissue-engineered constructs and native tissues. Source-specific spectral fingerprints can be generated and analyzed using multivariate analysis.

ללא קשר, לייבל ללא ניטור של תאים תאי מטריקס באמצעות ספקטרוסקופיית ראמאן

Non-destructive, non-contact and label-free technologies to monitor cell and tissue cultures are needed in the field of biomedical research.1-5 However, ...

Production, Characterization and Potential Uses of a 3D Tissue-engineered Human Esophageal Mucosal Model

The incidence of both esophageal adenocarcinoma and its precursor, Barrett&#8217;s Metaplasia, are rising rapidly in the western world. Furthermore esophageal adenocarcinoma generally has a poor prognosis, with little improvement in survival rates in recent years. These are difficult conditions to study and there has been a lack of suitable experimental platforms to investigate disorders of the esophageal mucosa.
A model of the human esophageal mucosa has been developed in the MacNeil laboratory which, unlike conventional 2D cell culture systems, recapitulates the cell-cell and cell-matrix interactions present in vivo and produces a mature, stratified epithelium similar to that of the normal human esophagus. Briefly, the model utilizes non-transformed normal primary human esophageal fibroblasts and epithelial cells grown within a porcine-derived acellular esophageal scaffold. Immunohistochemical characterization of this model by CK4, CK14, Ki67 and involucrin staining demonstrates appropriate recapitulation of the histology of the normal human esophageal mucosa.
This model provides a robust, biologically relevant experimental model of the human esophageal mucosa. It can easily be manipulated to investigate a number of research questions including the effectiveness of pharmacological agents and the impact of exposure to environmental factors such as alcohol, toxins, high temperature or gastro-esophageal refluxate components. The model also facilitates extended culture periods not achievable with conventional 2D cell culture, enabling, inter alia, the study of the impact of repeated exposure of a mature epithelium to the agent of interest for up to 20 days. Furthermore, a variety of cell lines, such as those derived from esophageal tumors or Barrett&#8217;s Metaplasia, can be incorporated into the model to investigate processes such as tumor invasion and drug responsiveness in a more biologically relevant environment.

This manuscript describes the production, characterization and potential uses of a tissue engineered 3D esophageal construct prepared from normal primary human esophageal fibroblast and squamous epithelial cells seeded within a de-cellularized porcine scaffold. The results demonstrate the formation of a mature stratified epithelium similar to the normal human esophagus.

ייצור, אפיון ופוטנציאל שימושים של הוושט רירי דגם אדם מהונדס-רקמות 3D

The incidence of both esophageal adenocarcinoma and its precursor, Barrett&#8217;s Metaplasia, are rising rapidly in the western world. Furthermore ...

Athymic Rat Model for Evaluation of Engineered Anterior Cruciate Ligament Grafts

Anterior cruciate ligament (ACL) rupture is a common ligamentous injury that often requires surgery because the ACL does not heal well without intervention. Current treatment strategies include ligament reconstruction with either autograft or allograft, which each have their associated limitations. Thus, there is interest in designing a tissue-engineered graft for use in ACL reconstruction. We describe the fabrication of an electrospun polymer graft for use in ACL tissue engineering. This polycaprolactone graft is biocompatible, biodegradable, porous, and is comprised of aligned fibers. Because an animal model is necessary to evaluate such a graft, this paper describes an intra-articular athymic rat model of ACL reconstruction that can be used to evaluate engineered grafts, including those seeded with xenogeneic cells. Representative histology and biomechanical testing results at 16 weeks postoperatively are presented, with grafts tested immediately post-implantation and contralateral native ACLs serving as controls. The present study provides a reproducible animal model with which to evaluate tissue engineered ACL grafts, and demonstrates the potential of a regenerative medicine approach to treatment of ACL rupture.

Animal models are important tools for the evaluation of tissue-engineered grafts. This paper presents the protocol for preparing an electrospun biodegradable polymer graft for use in anterior cruciate ligament tissue engineering, as well as a surgical protocol for implantation in a rat model.

Athymic עכברוש מודל להערכת הנדסי קדמי צולב גידים שתלי

Anterior cruciate ligament (ACL) rupture is a common ligamentous injury that often requires surgery because the ACL does not heal well without ...

Engineering 3D Cellularized Collagen Gels for Vascular Tissue Regeneration

Synthetic materials are known to initiate clinical complications such as inflammation, stenosis, and infections when implanted as vascular substitutes. Collagen has been extensively used for a wide range of biomedical applications and is considered a valid alternative to synthetic materials due to its inherent biocompatibility (i.e., low antigenicity, inflammation, and cytotoxic responses). However, the limited mechanical properties and the related low hand-ability of collagen gels have hampered their use as scaffold materials for vascular tissue engineering. Therefore, the rationale behind this work was first to engineer cellularized collagen gels into a tubular-shaped geometry and second to enhance smooth muscle cells driven reorganization of collagen matrix to obtain tissues stiff enough to be handled.
The strategy described here is based on the direct assembling of collagen and smooth muscle cells (construct) in a 3D cylindrical geometry with the use of a molding technique. This process requires a maturation period, during which the constructs are cultured in a bioreactor under static conditions (without applied external dynamic mechanical constraints) for 1 or 2 weeks. The &#8220;static bioreactor&#8221; provides a monitored and controlled sterile environment (pH, temperature, gas exchange, nutrient supply and waste removal) to the constructs. During culture period, thickness measurements were performed to evaluate the cells-driven remodeling of the collagen matrix, and glucose consumption and lactate production rates were measured to monitor the cells metabolic activity. Finally, mechanical and viscoelastic properties were assessed for the resulting tubular constructs. To this end, specific protocols and a focused know-how (manipulation, gripping, working in hydrated environment, and so on) were developed to characterize the engineered tissues.

In this work, we present a technique for the rapid fabrication of living vascular tissues by direct culturing of collagen, smooth muscle cells and endothelial cells. In addition, a new protocol for the mechanical characterization of engineered vascular tissues is described.

הנדסת ג&#39;ל קולגן Cellularized 3D לשחזור רקמות וכלי דם

Synthetic materials are known to initiate clinical complications such as inflammation, stenosis, and infections when implanted as vascular substitutes. ...

Applications of In Vivo Functional Testing of the Rat Tibialis Anterior for Evaluating Tissue Engineered Skeletal Muscle Repair

Despite the regenerative capacity of skeletal muscle, permanent functional and/or cosmetic deficits (e.g., volumetric muscle loss (VML) resulting from traumatic injury, disease and various congenital, genetic and acquired conditions are quite common. Tissue engineering and regenerative medicine technologies have enormous potential to provide a therapeutic solution. However, utilization of biologically relevant animal models in combination with longitudinal assessments of pertinent functional measures are critical to the development of improved regenerative therapeutics for treatment of VML-like injuries. In that regard, a commercial muscle lever system can be used to measure length, tension, force and velocity parameters in skeletal muscle. We used this system, in conjunction with a high power, bi-phase stimulator, to measure in vivo force production in response to activation of the anterior crural compartment of the rat hindlimb. We have previously used this equipment to assess the functional impact of VML injury on the tibialis anterior (TA) muscle, as well as the extent of functional recovery following treatment of the injured TA muscle with our tissue engineered muscle repair (TEMR) technology. For such studies, the left foot of an anaesthetized rat is securely anchored to a footplate linked to a servomotor, and the common peroneal nerve is stimulated by two percutaneous needle electrodes to elicit muscle contraction and dorsiflexion of the foot. The peroneal nerve stimulation-induced muscle contraction is measured over a range of stimulation frequencies (1-200 Hz), to ensure an eventual plateau in force production that allows for an accurate determination of peak tetanic force. In addition to evaluation of the extent of VML injury as well as the degree of functional recovery following treatment, this methodology can be easily applied to study diverse aspects of muscle physiology and pathophysiology. Such an approach should assist with the more rational development of improved therapeutics for muscle repair and regeneration.

Applications of In Vivo Functional Testing of the Rat Tibialis Anterior for Evaluating Tissue Engineered Skeletal Muscle Repair

We describe an in vivo protocol to measure dorsiflexion of the foot following stimulation of the peroneal nerve and contraction of the anterior crural compartment of the rat hindlimb. Such measurements are an indispensable translational tool for evaluating skeletal muscle pathology and tissue engineering approaches to muscle repair and regeneration.

יישומים של<em&gt; In vivo</em&gt; בדיקות פונקציונליות של עכברוש השוקה הקדמי להערכת רקמות מהונדסות תיקון שרירי שלד

Despite the regenerative capacity of skeletal muscle, permanent functional and/or cosmetic deficits (e.g., volumetric muscle loss (VML) resulting from ...

Scaling of Engineered Vascular Grafts Using 3D Printed Guides and the Ring Stacking Method

Coronary artery disease remains a leading cause of death, affecting millions of Americans. With the lack of autologous vascular grafts available, engineered grafts offer great potential for patient treatment. However, engineered vascular grafts are generally not easily scalable, requiring manufacture of custom molds or polymer tubes in order to customize to different sizes, constituting a time-consuming and costly practice. Human arteries range in lumen diameter from about 2.0-38 mm and in wall thickness from about 0.5-2.5 mm. We have created a method, termed the "Ring Stacking Method," in which variable size rings of tissue of the desired cell type, demonstrated here with vascular smooth muscle cells (SMCs), can be created using guides of center posts to control lumen diameter and outer shells to dictate vessel wall thickness. These tissue rings are then stacked to create a tubular construct, mimicking the natural form of a blood vessel. The vessel length can be tailored by simply stacking the number of rings required to constitute the length needed. With our technique, tissues of tubular forms, similar to a blood vessel, can be readily manufactured in a variety of dimensions and lengths to meet the needs of the clinic and patient.

Scalable engineered blood vessels would improve clinical applicability. Using easily sizable 3D-printed guides, rings of vascular smooth muscle were created and stacked into a tubular form, forming a vascular graft. Grafts can be sized to meet the range of human coronary artery dimensions by simply changing the 3D-printed guide size.

Scaling של שתלי כלי דם שהונדס בשיטות מדריכי 3D מודפס ואת שיטת נחת הטבעת

Coronary artery disease remains a leading cause of death, affecting millions of Americans. With the lack of autologous vascular grafts available, ...

A Novel Tenorrhaphy Suture Technique with Tissue Engineered Collagen Graft to Repair Large Tendon Defects

Surgical management of large tendon defects with tendon grafts is challenging, as there are a finite number of sites where donors can be readily identified and used. Currently, this gap is filled with tendon auto-, allo-, xeno-, or artificial grafts, but clinical methods to secure them are not necessarily translatable to animals because of the scale. In order to evaluate new biomaterials or study a tendon graft made up of collagen type 1, we have developed a modified suture technique to help maintain the engineered tendon in alignment with the tendon ends. Mechanical properties of these grafts are inferior to the native tendon. To incorporate engineered tendon into clinically relevant models of loaded repair, a strategy was adopted to offload the tissue engineered tendon graft and allow for the maturation and integration of the engineered tendon in vivo until a mechanically sound neo-tendon was formed. We describe this technique using incorporation of the collagen type 1 tissue engineered tendon construct.

In this paper, we present an in vitro and in situ protocol to repair a tendon gap of up to 1.5 cm by filling it with engineered collagen graft. This was performed by developing a modified suture technique to take the mechanical load until the graft matures into the host tissue.

טכניקת תפירת טנורהאפי חדשנית עם שתל קולגן מהונדס רקמה לתיקון פגמים גדולים בגיד

Surgical management of large tendon defects with tendon grafts is challenging, as there are a finite number of sites where donors can be readily ...

A Novel Surgical Technique As a Foundation for In Vivo Partial Liver Engineering in Rat

Organ engineering is a novel strategy to generate liver organ substitutes that can potentially be used in transplantation. Recently, in vivo liver engineering, including in vivo organ decellularization followed by repopulation, has emerged as a promising approach over ex vivo liver engineering. However, postoperative survival was not achieved. The aim of this study is to develop a novel surgical technique of in vivo selective liver lobe perfusion in rats as a prerequisite for in vivo liver engineering. We generate a circuit bypass only through the left lateral lobe. Then, the left lateral lobe is perfused with heparinized saline. The experiment is performed with 4 groups (n = 3 rats per group) based on different perfusion times of 20 min, 2 h, 3 h, and 4 h. Survival, as well as the macroscopically visible change of color and the histologically determined absence of blood cells in the portal triad and the sinusoids, is taken as an indicator for a successful model establishment. After selective perfusion of the left lateral lobe, we observe that the left lateral lobe, indeed, turned from red to faint yellow. In a histological assessment, no blood cells are visible in the branch of the portal vein, the central vein, and the sinusoids. The left lateral lobe turns red after reopening the blocked vessels. 12/12 rats survived the procedure for more than one week. We are the first to report a surgical model for in vivo single liver lobe perfusion with a long survival period of more than one week. In contrast to the previously published report, the most important advantage of the technique presented here is that perfusion of 70% of the liver is maintained throughout the whole procedure. The establishment of this technique provides a foundation for in vivo partial liver engineering in rats, including decellularization and recellularization.

A Novel Surgical Technique As a Foundation for In Vivo Partial Liver Engineering in Rat

We establish a novel surgical technique for an in vivo single liver lobe perfusion model in rat as a prerequisite for further studying in vivo partial liver engineering in the future.

טכניקה כירורגית הרומן כבסיס In Vivo חלקי הכבד הנדסה בעכברוש

Organ engineering is a novel strategy to generate liver organ substitutes that can potentially be used in transplantation. Recently, in vivo liver ...

Seeding and Implantation of a Biosynthetic Tissue-engineered Tracheal Graft in a Mouse Model

Treatment options for congenital or secondary long segment tracheal defects have historically been limited due to an inability to replace functional tissue. Tissue engineering holds great promise as a potential solution with its ability to integrate cells and signaling molecules into a 3-dimensional scaffold. Recent work with tissue engineered tracheal grafts (TETGs) has seen some success but their translation has been limited by graft stenosis, graft collapse, and delayed epithelialization. In order to investigate the mechanisms driving these issues, we have developed a mouse model for tissue engineered tracheal graft implantation. TETGs were constructed using electrospun polymers polyethylene terephthalate (PET) and polyurethane (PU) in a mixture of PET and PU (20:80 percent weight). Scaffolds were then seeded using bone marrow mononuclear cells isolated from 6-8 week-old C57BL/6 mice by gradient centrifugation. Ten million cells per graft were seeded onto the lumen of the scaffold and allowed to incubate overnight before implantation between the third and seventh tracheal rings. These grafts were able to recapitulate the findings of stenosis and delayed epithelialization as demonstrated by histological analysis and lack of Keratin 5 and Keratin 14 basal epithelial cells on immunofluorescence. This model will serve as a tool for investigating cellular and molecular mechanisms involved in host remodeling.

Graft stenosis poses a critical obstacle in tissue engineered airway replacement. To investigate cellular mechanisms underlying stenosis, we utilize a murine model of tissue engineered tracheal replacement with seeded bone marrow mononuclear cells (BM-MNC). Here, we detail our protocol, including scaffold manufacturing, BM-MNC isolation, graft seeding, and implantation.

Seeding, השרשת biosynthetic הוחלף נגזר רקמות מהונדסים בקנה הנשימה השתלה במודל של עכברים

Treatment options for congenital or secondary long segment tracheal defects have historically been limited due to an inability to replace functional ...