Chapter 8
Mixing, Placing and Curing Concrete
搅拌混凝土
The primary goal of mixing concrete is to stir its ingredients, ensuring the aggregates are evenly coated with cement paste, resulting in a uniform ...
混合时间
Concrete mixers are initially charged with 10 percent of the total water, followed by consistent additions of solid materials and 80 percent of the total ...
预拌混凝土
Concrete that is prepared at a centralized facility and then delivered to the job site in trucks, ready for placement, is known as ready-mixed or ...
泵送混凝土
Concrete can be transported through pipelines over long distances to be placed in locations difficult to access, such as deep foundation pits.
The system ...
浇筑混凝土
Concrete should be placed close to its final position in uniform horizontal layers.
After laying, the concrete layer is fully compacted to expel the ...
振动混凝土
Mechanical vibrators are used to compact freshly placed concrete in forms and around the reinforcement to expel the entrapped air and form a dense ...
喷射 混凝土
Shotcrete involves spraying mortar or small aggregate concrete rich in mortar through a hose at high velocity onto a surface that is typically
...
预替换骨料混凝土
Preplaced aggregate concrete is produced by initially placing gap-graded coarse aggregate that is sufficiently wet within the formwork and compacting it.
...
精加工混凝土
After consolidating the placed concrete, excess material is removed from the surface and flushed with the formwork's top using a screed.
Subsequently, ...
混凝土养护
Cement hydration occurs in the water-filled capillary pores of cement paste.
Environmental factors like air temperature, humidity, and wind can cause ...
固化方法
Oiling and moistening forms before pouring concrete aid in curing concrete members with a small surface-to-volume ratio.
These forms may be left in place ...
混凝土的加速固化
Concrete curing is accelerated by applying heat and adding moisture, yielding concrete with higher early strength.
Steam curing, often used for precast ...
版权所属 © 2025 MyJoVE 公司版权所有，本公司不涉及任何医疗业务和医疗服务。