One-Step Approach to Fabricating Polydimethylsiloxane Microfluidic Channels of Different Geometric Sections by Sequential Wet Etching Processes
9.7K Views
•
08:31 min
•
September 13th, 2018
DOI :
September 13th, 2018
•Chapters in this video
0:04
Title
1:12
Fabrication of Polydimethylsiloxane (PDMS) Channel Layouts
3:20
Experimental Characterization of PDMS Wet Etching
4:36
PDMS Sequential Wet Etching for Microfluidic Channels of a Cross-shaped Cross-section
5:50
Fabrication and Characterization of a Microfluidic Mixer with Different Channel Sections
7:08
Results: Fabrication of Microfluidic Channels with Different Geometric Sections
7:49
Conclusion
Related Videos
11:57
Fabricating Metamaterials Using the Fiber Drawing Method
13.7K Views
06:04
Simulation of the Planetary Interior Differentiation Processes in the Laboratory
11.5K Views
11:05
Knowledge Based Cloud FE Simulation of Sheet Metal Forming Processes
12.1K Views
06:58
Electrochemical Etching and Characterization of Sharp Field Emission Points for Electron Impact Ionization
9.4K Views
07:06
Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes
8.7K Views
07:19
Microfluidic Imaging Flow Cytometry by Asymmetric-detection Time-stretch Optical Microscopy (ATOM)
10.2K Views
10:09
Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers
8.2K Views
07:01
Nerve Stem Cell Differentiation by a One-step Cold Atmospheric Plasma Treatment In Vitro
7.3K Views
07:56
Drawing and Hydrophobicity-patterning Long Polydimethylsiloxane Silicone Filaments
8.8K Views
09:25
Fabricating van der Waals Heterostructures with Precise Rotational Alignment
9.3K Views
Copyright © 2025 MyJoVE Corporation. All rights reserved