This work was supported by the National Institutes of Health (DP1CA174426 to Carlos F. Barbas) and ShanghaiTech University, Shanghai, China (to J.L). Molecular graphics were generated using PyMol.

1. Cloning
<ol>
	<li>Obtain alanine-substituted two-finger ZiF domains that have been sub-cloned into the pET-28 expression vector system and are available upon request (pET-2F-ZiF).34</li>
	<li>PCR amplify EmGFP from the plasmid Emerald-pBAD with the primers 5&#8217; XmaI-EmGFP (5&#8217;-GGAAATTGCCCGGGATGGTGAGCAAGGGCGAGGAGCTGTTCAC-3&#8217;; XmaI site in bold) and 3&#8217; SacI-EmGFP (5&#8217;-CGGATCTGAGCTCTTACTTGTACAGCTCGTCCATGCCGAG-3&#8217;; SacI site in bold).
	<ol>
		<li>Use 5 ng of template DNA, 10 &#956;l of 10x polymerase buffer, 1 Units (U) of Taq DNA polymerase, 0.2 mM each dNTP and 0.2 &#956;M of each primer in a 100 &#956;l solution with the remaining volume made up of distilled/deionized water. Use the cycling conditions: 95 &#176;C for 5 min; 30 cycles of 95 &#176;C for 30 sec, 55 &#176;C for 30 sec and 72 &#176;C for 1 min; 72 &#176;C for 10 min. Purify the PCR product by gel extraction and determine DNA concentration using a spectrophotometer measuring Abs260 x 50 &#956;g/ml.</li>
	</ol>
	</li>
	<li>Digest pET-2F-ZiF and the insert encoding EmGFP with the restriction enzymes XmaI and SacI in recommended buffer for 3 hr at 37 &#176;C using 10 U of enzyme per 1 &#956;g of DNA. Visualize DNA by agarose gel electrophoresis using a fluorescent intercalating dye, such as ethidium bromide.</li>
	<li>Purify the digested DNA by gel extraction kit and determine DNA concentration by a spectrophotometer measuring Abs260 x 50 &#956;g/ml.</li>
	<li>Ligate the purified EmGFP-encoding DNA into 50-100 ng of pET-2F-ZiF using 1 U of T4 DNA Ligase for at least 1 h at RT. For best results, perform the ligation reaction using a 6:1 insert-to-vector molar ratio.</li>
	<li>Thaw 50 &#956;l of any chemically competent XL-1 Blue Escherichia coli cells on ice and mix gently with 10-20 ng of ligated pET-2F-ZiF-EmGFP.</li>
	<li>Keep on ice for 30 min. Heat shock the mixture at 42 &#176;C for 90 sec and recover the cells in 2 ml of Super Optimal broth with Catabolite repression (SOC) for 1 hr at 37 &#176;C with shaking.</li>
	<li>Spread 100 &#956;l of recovery culture on a lysogeny broth (LB) agar plate with 50 &#956;g/ml kanamycin and incubate O/N at 37 &#176;C.</li>
	<li>The following day, inoculate 6 ml of Super Broth (SB) or LB culture containing 50 &#956;g/ml kanamycin with one colony from the LB agar plate and culture O/N at 37 &#176;C. 
	Note: Colony PCR using the primers 5&#8217; XmaI-EmGFP and 3&#8217; SacI-EmGFP could be used to identify positive clones prior to miniprep.</li>
	<li>Purify pET-2F-ZiF-EmGFP by miniprep and confirm plasmid by DNA sequencing using T7 promoter (5&#8217;-TAATACGACTCACTATAGGG-3&#8217;).</li>
</ol>
2. Expression and Purification
<ol>
	<li>Thaw 50 &#956;l of chemically competent BL21 E. coli cells on ice and mix gently with 100 ng of pET-2F-ZiF-EmGFP plasmid. Transform as described in steps 1.7-1.8.</li>
	<li>The following day, inoculate 10 ml of LB medium containing 50 &#956;g/ml kanamycin with a single colony and grow O/N at 37 &#176;C with shaking.</li>
	<li>The following day, dilute the 10 ml of O/N culture into 1 L of LB medium supplemented with 50 &#956;g/ml kanamycin, 0.2% glucose and 100 &#956;M ZnCl2. Grow the culture at 37 &#176;C with shaking to an optical density at 600 nm (OD600) of 0.8 and induce protein expression with 2 mM isopropyl-&#946;-D-1-thiogalactopyranoside (IPTG). After 6 hr of growth at 37 &#176;C, harvest cells by centrifugation at 5,000 x g for 10 min at 4 &#176;C. 
	Note: Induction conditions are highly variable and depend on the stability of the proteins being expressed. Monitor the OD600 every 30 min until an OD600 of 0.8 is reached.</li>
	<li>Resuspend the cell pellet in 5 ml of lysis buffer (50 mM Tris-HCl, 500 mM NaCl, 100 &#956;M ZnCl2, 1 mM dithiothreitol (DTT), 1 mM MgCl2, 1 mM phenylmethylsulfonyl fluoride (PMSF) and 10 mM imidazole, pH 8.0). Lyse the cells on ice by sonication with the following setting: 50% power output, 4 min process time with 5 sec on/10 sec off intervals. Avoid overheating the solution.</li>
	<li>Centrifuge the cell lysate at 25,000 x g for 30 min at 4 &#176;C and transfer the supernatant into a fresh collection tube. For best results, perform all the following steps at 4 &#176;C.</li>
	<li>Run the supernatant through a column pre-packed with 1 ml of equilibrated Ni-NTA slurry. Wash the resin with 20 ml of wash buffer (50 mM Tris-HCl, 500 mM NaCl, 100 &#956;M ZnCl2, 1 mM DTT, 1 mM MgCl2 and 30 mM imidazole, pH 8.0).</li>
	<li>Elute the protein with 5 ml of elution buffer (50 mM Tris-HCl, 500 mM NaCl, 100 &#956;M ZnCl2, 1 mM DTT, 1 mM MgCl2, and 300 mM imidazole, pH 8.0).</li>
	<li>Buffer exchange the eluted protein with storage buffer (50 mM Tris-HCl, 500 mM NaCl, 100 &#956;M ZnCl2, 1 mM DTT, 1 mM MgCl2 and 10% glycerol, pH 8.0) and concentrate the protein to at least 40 &#956;M using a spin concentrator by centrifugation according to the manufacturer&#8217;s instructions.</li>
	<li>Determine protein concentration by BCA or Bradford assay. Mix 2 &#956;l of purified proteins with 2 &#956;l 2&#215; SDS-PAGE loading dye, boil at 95 &#176;C for 10 min and then resolve on 4%-20% Tris-Glycine SDS-PAGE to assess protein purity (Figure 2).</li>
</ol>
3. Protein Storage
<ol>
	<li>Aliquot the concentrated protein, flash freeze in liquid nitrogen and store at -80 &#176;C. For EmGFP fusion proteins, cover the tube with aluminum foil in order to protect the protein from light.</li>
	<li>Avoid repeated freezing and thawing of the protein solution. Note: ZiF-fused proteins are stable under these conditions for at least 1 month. Inappropriate or &#62;4 month storage may lead to protein precipitation or photobleaching of EmGFP.</li>
</ol>
4. Protein Transduction
<ol>
	<li>Maintain HeLa cells in Dulbecco&#8217;s modified Eagle&#8217;s medium (DMEM) containing 10% (v/v) fetal bovine serum (FBS) and 1% antibiotic-antimycotic at 37 &#176;C in a fully humidified atmosphere with 5% CO2. 
	Note: Cells passaged more than 30 times are not recommended for protein transduction.</li>
	<li>Pre-coat a 24-well plate with 500 &#956;l of 50 &#956;g/ml of poly-lysine for 30 to 60 min at 25 &#176;C. Seed cells onto a 24-well plate at a density of 2 &#215; 105 cells per well. At 24 hr after seeding, or once cells are between 80%-90% confluent, remove media from each well and wash with 500 &#956;l of pre-warmed serum-free DMEM (SFM).</li>
	<li>To each well, add 250 &#956;l of SFM containing 2 &#956;M of ZiF-EmGFP protein and 100 &#956;M ZnCl2. Incubate cells at 37 &#176;C for 1 hr. Note: ZiF domains enter cells primarily through macropinocytosis,34 which is an energy-dependent mechanism. Therefore, cells must be incubated at 37 &#176;C for efficient protein internalization.</li>
	<li>Remove media from cells and wash three times with 500 &#956;l of calcium- and magnesium-free Dulbecco&#8217;s phosphate-buffered saline (DPBS) supplemented with 0.5 mg/ml of heparin. Note: Heparin is necessary to remove surface-bound protein that might complicate downstream analyses.</li>
	<li>(Optional) Repeat treatments up to three times for enhanced delivery.</li>
	<li>Isolate treated cells immediately after heparin wash by digestion with 0.05% trypsin-EDTA at 37 &#176;C for 2 min. Re-suspend detached cells in 0.5 ml of DPBS supplemented with 1% FBS.</li>
	<li>Measure the fluorescence intensity of each sample by flow cytometry35 using the fluorescein isothiocyanate (FITC) channel (Figure 3). Adjust the forward scatter (FSC) and side scatter (SSC) to place the population of interest on scale, ensuring that populations with different properties are resolved from each other.</li>
	<li>Collect 10,000 live events for each sample and analyze the data using flow cytometry data analysis software.36 Normalize fluorescence from HeLa cells treated with ZiF-EmGFP to those cells treated only with SFM.</li>
</ol>

<ol>
	<li>Berg, A., Dowdy, S. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein+transduction+domain+delivery+of+therapeutic+macromolecules.">Protein transduction domain delivery of therapeutic macromolecules.</a> Curr. Opin. Biotechnol. 22, 888-893 (2011).</li><li>Lindsay, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Peptide-mediated+cell+delivery:+application+in+protein+target+validation.">Peptide-mediated cell delivery: application in protein target validation.</a> Curr. Opin. Pharmacol. 2, 587-594 (2002).</li><li>Luo, D., Saltzman, W. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthetic+DNA+delivery+systems.">Synthetic DNA delivery systems.</a> Nat. Biotechnol. 18, 33-37 (2000).</li><li>Guo, X., Huang, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+nonviral+vectors+for+gene+delivery.">Recent advances in nonviral vectors for gene delivery.</a> Acc. Chem. Res. 45, 971-979 (2012).</li><li>Thomas, C. E., Ehrhardt, A., Kay, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Progress+and+problems+with+the+use+of+viral+vectors+for+gene+therapy.">Progress and problems with the use of viral vectors for gene therapy.</a> Nat. Rev. Genet. 4, 346-358 (2003).</li><li>Frankel, A. D., Pabo, C. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellular+uptake+of+the+tat+protein+from+human+immunodeficiency+virus.">Cellular uptake of the tat protein from human immunodeficiency virus.</a> Cell. 55, 1189-1193 (1988).</li><li>Elliott, G., O'Hare, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intercellular+trafficking+and+protein+delivery+by+a+herpesvirus+structural+protein.">Intercellular trafficking and protein delivery by a herpesvirus structural protein.</a> Cell. 88, 223-233 (1997).</li><li>Derossi, D., Joliot, A. H., Chassaing, G., Prochiantz, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+third+helix+of+the+Antennapedia+homeodomain+translocates+through+biological+membranes.">The third helix of the Antennapedia homeodomain translocates through biological membranes.</a> J. Biol. Chem. 269, 10444-10450 (1994).</li><li>Smith, B. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Minimally+cationic+cell-permeable+miniature+proteins+via+alpha-helical+arginine+display.">Minimally cationic cell-permeable miniature proteins via alpha-helical arginine display.</a> J. Am. Chem. Soc. 130, 2948-2949 (2008).</li><li>Daniels, D. S., Schepartz, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intrinsically+cell-permeable+miniature+proteins+based+on+a+minimal+cationic+PPII+motif.">Intrinsically cell-permeable miniature proteins based on a minimal cationic PPII motif.</a> J. Am. Chem. Soc. 129, 14578-14579 (2007).</li><li>Karagiannis, E. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rational+design+of+a+biomimetic+cell+penetrating+peptide+library.">Rational design of a biomimetic cell penetrating peptide library.</a> ACS Nan. 7, 8616-8626 (2013).</li><li>Gao, S., Simon, M. J., Hue, C. D., Morrison, B., 3r, S., Banta, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+unusual+cell+penetrating+peptide+identified+using+a+plasmid+display-based+functional+selection+platform.">An unusual cell penetrating peptide identified using a plasmid display-based functional selection platform.</a> ACS Chem. Biol. 6, 484-491 (2011).</li><li>Fuchs, S. M., Raines, R. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arginine+grafting+to+endow+cell+permeability.">Arginine grafting to endow cell permeability.</a> ACS Chem. Biol. 2, 167-170 (2007).</li><li>Cronican, J. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Potent+delivery+of+functional+proteins+into+mammalian+cells+in+vitro+and+in+vivo+using+a+supercharged+protein.">Potent delivery of functional proteins into mammalian cells in vitro and in vivo using a supercharged protein.</a> ACS Chem. Biol. 5, 747-752 (2010).</li><li>Panyam, J., Labhasetwar, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biodegradable+nanoparticles+for+drug+and+gene+delivery+to+cells+and+tissue.">Biodegradable nanoparticles for drug and gene delivery to cells and tissue.</a> Adv. Drug Deliv. Rev. 55, 329-347 (2003).</li><li>Zelphati, O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intracellular+delivery+of+proteins+with+a+new+lipid-mediated+delivery+system.">Intracellular delivery of proteins with a new lipid-mediated delivery system.</a> J. Biol. Chem. 276, 35103-35110 (2001).</li><li>Kaczmarczyk, S. J., Sitaraman, K., Young, H. A., Hughes, S. H., Chatterjee, D. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein+delivery+using+engineered+virus-like+particles.">Protein delivery using engineered virus-like particles.</a> Proc. Natl. Acad. Sci. U. S. A. 108, 16998-17003 (2011).</li><li>Voelkel, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein+transduction+from+retroviral+Gag+precursors.">Protein transduction from retroviral Gag precursors.</a> Proc. Natl. Acad. Sci. U. S. A. 107, 7805-7810 (2010).</li><li>Sinha, V. R., Trehan, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biodegradable+microspheres+for+protein+delivery.">Biodegradable microspheres for protein delivery.</a> J. Control Release. 90, 261-280 (2003).</li><li>Liu, J., Gaj, T., Patterson, J. T., Sirk, S. J., Barbas, C. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell-penetrating+peptide-mediated+delivery+of+TALEN+proteins+via+bioconjugation+for+genome+engineering.">Cell-penetrating peptide-mediated delivery of TALEN proteins via bioconjugation for genome engineering.</a> PLoS One. 9, e85755 (2014).</li><li>Ramakrishna, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gene+disruption+by+cell-penetrating+peptide-mediated+delivery+of+Cas9+protein+and+guide+RNA.">Gene disruption by cell-penetrating peptide-mediated delivery of Cas9 protein and guide RNA.</a> Genome Res. 24, 1020-1027 (2014).</li><li>Fuchs, S. M., Raines, R. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polyarginine+as+a+multifunctional+fusion+tag.">Polyarginine as a multifunctional fusion tag.</a> Protein Sci. 14, 1538-1544 (2005).</li><li>Mai, J. C., Shen, H., Watkins, S. C., Cheng, T., Robbins, P. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Efficiency+of+protein+transduction+is+cell+type-dependent+and+is+enhanced+by+dextran+sulfate.">Efficiency of protein transduction is cell type-dependent and is enhanced by dextran sulfate.</a> J. Biol. Chem. 277, 30208-30218 (2002).</li><li>Al-Taei, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intracellular+traffic+and+fate+of+protein+transduction+domains+HIV-1+TAT+peptide+and+octaarginine.+Implications+for+their+utilization+as+drug+delivery+vectors.">Intracellular traffic and fate of protein transduction domains HIV-1 TAT peptide and octaarginine. Implications for their utilization as drug delivery vectors.</a> Bioconjug. Chem. 17, 90-100 (2006).</li><li>Jones, S. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterisation+of+cell-penetrating+peptide-mediated+peptide+delivery.">Characterisation of cell-penetrating peptide-mediated peptide delivery.</a> Br. J. Pharmacol. 145, 1093-1102 (2005).</li><li>Urnov, F. D., Rebar, E. J., Holmes, M. C., Zhang, H. S., Gregory, P. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genome+editing+with+engineered+zinc+finger+nucleases.">Genome editing with engineered zinc finger nucleases.</a> Nat. Rev. Genet. 11, 636-646 (2010).</li><li>Carroll, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genome+engineering+with+zinc-finger+nucleases.">Genome engineering with zinc-finger nucleases.</a> Genetics. 188, 773-782 (2011).</li><li>Guo, J., Gaj, T., Barbas, C. F., 3rd, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Directed+evolution+of+an+enhanced+and+highly+efficient+FokI+cleavage+domain+for+zinc+finger+nucleases.">Directed evolution of an enhanced and highly efficient FokI cleavage domain for zinc finger nucleases.</a> J. Mol. Biol. 400, 96-107 (2010).</li><li>Gaj, T., Guo, J., Kato, Y., Sirk, S. J., Barbas, C. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Targeted+gene+knockout+by+direct+delivery+of+zinc-finger+nuclease+proteins.">Targeted gene knockout by direct delivery of zinc-finger nuclease proteins.</a> Nat. Methods. 9, 805-807 (2012).</li><li>Gersbach, C. A., Gaj, T., Barbas, C. F., 3rd, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthetic+zinc+finger+proteins:+the+advent+of+targeted+gene+regulation+and+genome+modification+technologies.">Synthetic zinc finger proteins: the advent of targeted gene regulation and genome modification technologies.</a> Acc. Chem. Res. 47, 2309-2318 (2014).</li><li>Gaj, T., Gersbach, C. A., Barbas, C. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=ZFN,+TALEN,+and+CRISPR/Cas-based+methods+for+genome+engineering.">ZFN, TALEN, and CRISPR/Cas-based methods for genome engineering.</a> Trends Biotechnol. 31, 397-405 (2013).</li><li>Perez-Pinera, P., Ousterout, D. G., Gersbach, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Advances+in+targeted+genome+editing.">Advances in targeted genome editing.</a> Curr. Opin. Chem. Biol. 16, 268-277 (2012).</li><li>Cronican, J. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+class+of+human+proteins+that+deliver+functional+proteins+into+mammalian+cells+in+vitro+and+in+vivo.">A class of human proteins that deliver functional proteins into mammalian cells in vitro and in vivo.</a> Chem. Biol. 18, 833-838 (2011).</li><li>Gaj, T., Liu, J., Anderson, K. E., Sirk, S. J., Barbas, C. F., 3rd, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein+delivery+using+Cys2-His2+zinc-finger+domains.">Protein delivery using Cys2-His2 zinc-finger domains.</a> ACS Chem. Biol. 9, 1662-1667 (2014).</li><li>Radcliff, G., Jaroszeski, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Basics+of+flow+cytometry.">Basics of flow cytometry.</a> Methods Mol. Biol. 91, 1-24 (1998).</li><li>Mercer, A. C., Gaj, T., Sirk, S. J., Lamb, B. M., Barbas, C. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Regulation+of+endogenous+human+gene+expression+by+ligand-inducible+TALE+transcription+factors.">Regulation of endogenous human gene expression by ligand-inducible TALE transcription factors.</a> ACS Synth. Biol. 3, 723-730 (2014).</li><li>Segal, D. J., Crotty, J. W., Bhakta, M. S., Barbas, C. F., Horton, N. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+of+Aart,+a+designed+six-finger+zinc+finger+peptide,+bound+to+DNA.">Structure of Aart, a designed six-finger zinc finger peptide, bound to DNA.</a> J. Mol. Biol. 363, 405-421 (2006).</li></ol>

The authors have nothing to disclose.

Here, a step-by-step protocol for protein delivery using cell-permeable zinc-finger (ZiF) domains is presented. The ZiF domain does not reduce the activity of fused enzymatic cargo34; allows for the production and purification of proteins in yields nearly identical to those observed with unmodified protein; and can transport proteins and enzymes into a wide range of cell types with efficiencies that exceed traditional cell-penetrating peptide or protein transduction domain systems. Together, these findings ind...

Highly efficient and versatile protein delivery strategies are critical for many basic research and therapeutic applications. The direct delivery of purified proteins into cells represents one of the safest and easiest methods for achieving this.1,2 Unlike strategies that rely on gene expression from nucleic acids,3-5 protein delivery poses no risk of insertional mutagenesis, is independent of the cellular transcription/translation machinery and allows for an immediate effect. However, the lack of simple and generalizable methods for endowing cell-penetrating activity onto proteins routinely confounds their direct entry into cells. Current methods for facilitating intracellular protein delivery are based on the use of naturally occurring6-8 or designed cell-penetrating peptides,9-12 supercharged transduction domains,13,14 nanoparticles15 and liposomes,16 virus-like particles17,18 and polymeric microsphere materials.19 Unfortunately, many of these approaches are hampered by low cellular uptake rates,20,21 poor stability,22 inadvertent cell-type specificity,23 low endosomal escape properties24 and toxicity.25 In addition, many protein transduction technologies reduce the bioactivity of the delivered proteins.14
Our laboratory previously demonstrated that zinc-finger nuclease (ZFN) proteins &#8212; chimeric restriction endonucleases consisting of a programmable Cys2-His2 zinc-finger DNA-binding protein and the cleavage domain of the FokI restriction endonuclease26-28&#160;&#8212; are inherently cell-permeable.29 This surprising cell-penetrating activity was shown to be an intrinsic property of the custom-designed zinc-finger domain, a DNA-binding platform that has emerged as a powerful tool for targeted genome engineering,30-32 and considered to be the result of the constellation of six positively charged residues on the protein surface. Indeed, several DNA-binding proteins, including c-Jun and N-DEK have been shown to possess an innate capacity to cross cell membranes.33 More recently, our laboratory expanded on these results and demonstrated that the cell-penetrating activity of zinc-finger (ZiF) domains could be leveraged for intracellular protein delivery. Genetic fusion of either one- or two-finger ZiF domains to specific protein cargo led to uptake efficiencies that exceeded many conventional cell-penetrating peptide delivery systems.34 Most notably, ZiF-mediated delivery did not compromise the activity of fused enzymatic cargo and facilitated high levels of cytosolic delivery. Collectively, these findings demonstrate the potential of the ZiF domain for facilitating the efficient and facile delivery of proteins, and potentially more diverse types of macromolecules, into cells.
Here, a detailed step-by-step protocol on how to implement ZiF technology for protein delivery in mammalian cells is presented. We previously constructed a suite of one-, two-, three-, four-, five- and six-finger ZiF domains that lack the ability to bind DNA, due to substitution of each of the &#945;-helical DNA-binding residues, but are capable of delivering proteins into cells34 (Figure 1). The production and transduction of Emerald GFP (EmGFP) into HeLa cells using a two-finger ZiF domain is described. This protocol is extensible to almost any protein capable of soluble expression in Escherichia coli and nearly any mammalian cell type. Expected results are provided and strategies for maximizing the performance of this system are also discussed.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>XmaI</td>
			<td>New England Biolabs</td>
			<td>R0180L</td>
			<td></td>
		</tr>
		<tr>
			<td>SacI</td>
			<td>New England Biolabs</td>
			<td>R0156L</td>
			<td></td>
		</tr>
		<tr>
			<td>Expand High Fidelity PCR system</td>
			<td>Roche</td>
			<td>11759078001</td>
			<td></td>
		</tr>
		<tr>
			<td>dNTPs</td>
			<td>New England Biolabs</td>
			<td>N0446S</td>
			<td></td>
		</tr>
		<tr>
			<td>4-20% Tris-Glycine Mini protein gels, 1.5 mm, 10 wells</td>
			<td>Life Technologies</td>
			<td>EC6028BOX</td>
			<td></td>
		</tr>
		<tr>
			<td>2x Laemmli Sample Buffer</td>
			<td>BioRad</td>
			<td>161-0737</td>
			<td></td>
		</tr>
		<tr>
			<td>T4 DNA Ligase</td>
			<td>Life Technologies</td>
			<td>15224-017</td>
			<td></td>
		</tr>
		<tr>
			<td>BL21 (DE3) Competent E. coli</td>
			<td>New England Biolabs</td>
			<td>C2527I</td>
			<td></td>
		</tr>
		<tr>
			<td>IPTG</td>
			<td>Thermo Scientific</td>
			<td>R0391</td>
			<td></td>
		</tr>
		<tr>
			<td>Zinc Chloride</td>
			<td>Sigma-Aldrich</td>
			<td>208086-5G</td>
			<td></td>
		</tr>
		<tr>
			<td>Kanamycin Sulfate</td>
			<td>Fisher Scientific</td>
			<td>BP906-5</td>
			<td></td>
		</tr>
		<tr>
			<td>Glucose</td>
			<td>Sigma-Aldrich</td>
			<td>G8270-100G</td>
			<td></td>
		</tr>
		<tr>
			<td>Tris Base</td>
			<td>Fisher Scientific</td>
			<td>BP152-25</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium Chloride</td>
			<td>Sigma-Aldrich</td>
			<td>S9888-25G</td>
			<td></td>
		</tr>
		<tr>
			<td>DTT</td>
			<td>Fisher Scientific</td>
			<td>PR-V3151&#160;</td>
			<td></td>
		</tr>
		<tr>
			<td>PMSF</td>
			<td>Thermo Scientific</td>
			<td>36978</td>
			<td></td>
		</tr>
		<tr>
			<td>Ni-NTA Agarose Resin</td>
			<td>QIAGEN</td>
			<td>30210</td>
			<td></td>
		</tr>
		<tr>
			<td>Glycerol</td>
			<td>Sigma-Aldrich</td>
			<td>G5516-500ML</td>
			<td></td>
		</tr>
		<tr>
			<td>Imidazole</td>
			<td>Sigma-Aldrich</td>
			<td>I5513-25G</td>
			<td></td>
		</tr>
		<tr>
			<td>Amicon Ultra-15 Centrifugal Filter Units</td>
			<td>EMO Millipore</td>
			<td>UFC900324</td>
			<td></td>
		</tr>
		<tr>
			<td>DMEM</td>
			<td>Life Technologies</td>
			<td>11966-025</td>
			<td></td>
		</tr>
		<tr>
			<td>Fetal Bovine Serum</td>
			<td>Life Technologies</td>
			<td>10437-028</td>
			<td></td>
		</tr>
		<tr>
			<td>Antibiotic-Antimycotic&#160;</td>
			<td>Life Technologies</td>
			<td>15240-062</td>
			<td></td>
		</tr>
		<tr>
			<td>24-Well Flat Bottom Plate</td>
			<td>Sigma-Aldrich</td>
			<td>CLS3527-100EA</td>
			<td></td>
		</tr>
		<tr>
			<td>Poly-Lysine</td>
			<td>Sigma-Aldrich</td>
			<td>P7280</td>
			<td></td>
		</tr>
		<tr>
			<td>DPBS, No Calcium, No Magnesium</td>
			<td>Life Technologies</td>
			<td>21600010</td>
			<td></td>
		</tr>
		<tr>
			<td>Heparan Sulfate</td>
			<td>Sigma-Aldrich</td>
			<td>H4777</td>
			<td></td>
		</tr>
		<tr>
			<td>Trypsin</td>
			<td>Life Technologies</td>
			<td>25300054</td>
			<td></td>
		</tr>
		<tr>
			<td>Hela cells</td>
			<td>ATCC</td>
			<td>CCL-2</td>
			<td></td>
		</tr>
		<tr>
			<td>Nano Drop ND-1000 spectrophotometer&#160;</td>
			<td>Thermo Fisher Scientific</td>
			<td>N/A</td>
			<td></td>
		</tr>
		<tr>
			<td>QIAquick PCR Purification Kit</td>
			<td>QIAGEN</td>
			<td>28104</td>
			<td></td>
		</tr>
		<tr>
			<td>QIAquick Gel Extraction Kit</td>
			<td>QIAGEN</td>
			<td>28704</td>
			<td></td>
		</tr>
	</tbody>
</table>

direct protein delivery to mammalian cells using cell-permeable cys2-his2 zinc-finger domains

Due to their modularity and ability to be reprogrammed to recognize a wide range of DNA sequences, Cys2-His2 zinc-finger DNA-binding domains have emerged as useful tools for targeted genome engineering. Like many other DNA-binding proteins, zinc-fingers also possess the innate ability to cross cell membranes. We recently demonstrated that this intrinsic cell-permeability could be leveraged for intracellular protein delivery. Genetic fusion of zinc-finger motifs leads to efficient transport of protein and enzyme cargo into a broad range of mammalian cell types. Unlike other protein transduction technologies, delivery via zinc-finger domains does not inhibit enzyme activity and leads to high levels of cytosolic delivery. Here a detailed step-by-step protocol is presented for the implementation of zinc-finger technology for protein delivery into mammalian cells. Key steps for achieving high levels of intracellular zinc-finger-mediated delivery are highlighted and strategies for maximizing the performance of this system are discussed.

Two-finger ZiF-EmGFP fusion proteins can be expressed in E. coli with &#62;95% homogeneity and high yields (&#62;25 mg/ml) (Figure 2). In general, one- and two-finger ZiF fusion proteins can be produced in quantities nearly identical to those of wild-type unmodified protein. However, in some contexts, five- and six-finger ZiF fusion proteins are unable to be produced in yields high enough for downstream applications.
Direct application of two-finger ZiF-EmGFP protein ...

Watch this Scientific Journal Video about Direct Protein Delivery to Mammalian Cells Using Cell-permeable Cys2-His2 Zinc-finger Domains at JoVE.com

Direct Protein Delivery to Mammalian Cells Using Cell-permeable Cys2-His2 Zinc-finger Domains

Zinc-finger domains are intrinsically cell-permeable and capable of mediating protein delivery into a broad range of mammalian cell types. Here, a detailed step-by-step protocol for implementing zinc-finger technology for intracellular protein delivery is presented.

Direct Protein Delivery to Mammalian Cells Using Cell-permeable Cys2-His2 Zinc-finger Domains

Due to their modularity and ability to be reprogrammed to recognize a wide range of DNA sequences, Cys2-His2 zinc-finger DNA-binding domains have emerged ...

direct-protein-delivery-to-mammalian-cells-using-cell-permeable-cys2

Research

JoVE Journal

Biology

9.8K Views.  The Scripps Research Institute. Zinc-finger domains are intrinsically cell-permeable and capable of mediating protein delivery into a broad range of mammalian cell types. Here, a detailed step-by-step protocol for implementing zinc-finger technology for intracellular protein delivery is presented.

Video: Direct Protein Delivery to Mammalian Cells Using Cell-permeable Cys2-His2 Zinc-finger Domains

Long-term Imaging Mammalian Cells using Wide-Field Microscopy

Actually what I'm gonna do, mount it in here first and then swap out You. So now I'm gonna aspirate try and be as gentle as possible.Okay. A few seconds just holding.Okay.Alright.So the important features of our lifestyle imaging grid are that, so it's an inverted scope, which means the objective, the samples here in the objective is underneath. So the objective is pointing up and the whole scope, or practically the whole, practically the whole scope, including the objectives and the sample are at 37 degrees. So everything in this plastic box is at 37 degrees.And right on top of the stage we have an air and CO2 mix. That is 5%CO2. So the idea is that the sample is actually in a cell, it's like a cell incubator.And so we have, this is our mixer for the air and the CO2 and, and it gets humidified and heated and then piped onto the, the sample on the stage.Okay. And today we're just gonna be doing fluorescence one channel GFP fluorescence. This is the hose that the CO2 and 5%CO2 goes in and it just fits into the stage holder.That's important. And then we can close these, take these down, and then we go to our first position. And what I'm gonna do is go to the first field, which is my control sample, and I'll pick positions based on what I see on the screen.So I just make sure I actually look into the microscope in each new, well, because the focal plane for each of the wells is different, the, the dish is not perfectly flat on the bottom. So you will need to make fine adjustments when you move from well to the well. So right now I'm on the first, well, what I'll do is I'll focus, so I just hit, I just told, I just turned on the light, the transmitted light for the microscope.And I have make sure all the light is going to the eye pieces. And so I just look in, make sure I get a nice clean field. And then what I'll do is turn that light off, turn the fluorescence light on, make sure the cells that I'm looking at look healthy and they're not apoptotic.And, and I turn that off. And what I do next is send, so now I'm gonna start picking positions, which means I have to te send the light path to the camera. This is the camera right here.So I tell the microscope to send all the camera, they don't see anything in the eye pieces. What I'll do is in the software controlling the microscope, I'll choose the right filter set, which for our purposes is psy. And then set an exposure time.And I know these cells very well and I know that they take a 0.2 second exposure time. So I tell, that's what I tell the software to do. And what I'll do is hit focus.This is, and it's basically just alive. The, A light will turn on and you can, oh, I don't know if you can see cells, but the reason this is a good field is because there's, all the cells are, even in terms of their fluorescence, There are no apoptotic cells. Apoptotic cells tend to be very bright and there's no dirt or schmutz in the field.And you can see that they're actually, this is a metaphase cell and that's a metaphase cell, that's a cell that's probably just exited mitosis. And I can just tell that because it looks like those are, those two sets of chromatin are very nicely oriented to each other. Like they just exited an face.So that's a good field. So, and now that I know that the exposure time and the filter set is correct, and this is gonna be software specific, I'll go and I'll take positions and now the software has memorized the X, Y, Z position of that field. And then when I do pick another field, it's, and I'll, so when I'm picking, when I'm picking new fields, but in the same, well, I'll use the, I'll move the i'll, I'll turn the shutter, I'll open the shutter and I'll look to see what I see on the screen and I'll pick fields based on that versus looking in the field.So I don't see any of my tonics in there. But again, even nicely centered, these cells will go through my PS I continue, here's a good example. Here's a good example of what I would avoid that, see how bright that is?That's very bright. That's probably remnants of an apoptotic cell. And the reason I would avoid that is because since it's so bright, when the software auto focuses, it will autofocus just on that and it won't be in the same plane as all these other cells.And so I won't get any information from that field. That looks nice. There's a, this is a pro metaphase right here, That's A metaphase.So, and I'm gonna take three positions per well. So that was three positions and now I'm going to go to my next Well, so you can, so what I will probably do is take images every 10 minutes. So it's a compromise.Lifestyle imaging is always a compromise, right? You have to image, you have to keep the cells healthy, especially if you're interested in mitosis. So you have to minimize their exposure to the fluorescent line.And, but you wanna get information. So you have to take images, you have to, so you have to compromise, you have to make a choice about what you want to capture, what kind of information you wanna capture. For our purposes, mitosis tends to take about an hour.So if we're taking 10 minute intervals, that's pretty good. We see prophase, we see metaphase, we see anaphase, and we can, we can see when there are, there are treatments or drugs or siRNAs that affect those specific cell cycle stages. So for our purposes, that's enough, but we always want more.We always want more positions or finer time and interval or something like that. So it's a compromise. So, and then I'll hit start.And so our software, it does an autofocusing pass on the first pass. So once I hit start, it should start auto autofocusing and you'll see the shutter open, open and close between auto focusing. So I'll hit start.So that's the shutter opening and closing. The Z motor is engaging and it's actually trying to find the plane with the most contrast, which will be the most in focus. You can actually see on the screen going in and out of finding the best plane of focus that might be worrisome.So what it does is it, it drives the Z motor to find the best, the most in focus plane focus, well the most in image. And then it acquires picture there and then it learns that Z position. And then we'll use that Z position for the next 12 passes.And then we'll do the auto focusing pass again. What Kind of experiments do they do? Okay, so our lab is mostly interested in understanding what regulates mitic progression, or at least I'm most interested in understanding that.So with live cell imaging and especially our multi position, long-term imaging scope, you can take, you can film cells for two or three days entering anding mitosis, and you can image multiple rounds of mitosis so you can understand. And then you can put drugs or RNAs or any kind of perturbations on the cells that you would like to study. So you can understand how, how those drugs or, or genes are, are important in regulating mitotic progression.Because it's not fixed cell work and live cell work, you can understand what, when you need to have a perturbation to affect mitosis or what stage of mitosis is affected. So it's really powerful in that respect. What, what are the main technical elements of this experiments?What are the possible problems? Well, the biggest problem besides getting the rig set up, getting the rig set up is not trivial. A lot of people have the rig, but just making sure it works well for your application.The financial element is not, you know, is not small. So there's the setting up of the apparatus and then, and then once you gather the data, there's a real data analysis issue. It takes these movie, if, so, if you're gathering 40 movies each with 30 cells, so you have 40 in 40 fields that you just filmed and each of those fields has 30 cells, then you have to sit down with each one of those movies and look at each one of those cells in that movie.So it takes a really long time to do data analysis. And that's, so it takes a week to analyze data that it took you two days to collect. So there's a, that's a very big obstacle in terms of gathering lots of data.So it's not, while it's high throughput data collection, it's not high throughput analysis. So what would you make to make this experiment really high throughput? So our lab is in the process of developing a program that does the data analysis automatically.And it's a pretty decent program. It's not perfect. The human eye is always better, but it's getting there.So What are the interesting application of this experiment? Maybe other fields you can mention? Besides cell division?You mean for the, oh, for the live cell imaging? Yes.Well, you can do cell motility assays. You can, depending on the, the microscopy that's involved, you can, you know, look at how cells, you could look at tumor development if you really wanted to.But there, you, you're, if as long as you have the right imaging set up, you can, you're pretty much not limited in terms of anything. Our scope happens to be just a wide field and we use 20 by 20 x objective. So it's a pretty low resolution set up, but that's sufficient for what we need to see.So there are, but there definitely aren't, you wouldn't be limited. Anything that has any dynamic kind of experiment, which is biology, it would be, would really benefit from lifestyle imaging. So calcium imaging, although you couldn't do it on our apparatus, that's a live cell.You definitely need live cell imaging for that. Like I said, patient assays, motility assays, those kinds of things would really benefit from live cell imaging. Would you like to tell a few words about your previous experience?How long do you work on these techniques? What do you you work on before? Wow.So in my PhD I didn't work.I did a lot of confocal microscopy, but no lifestyle imaging. And so during my postdoc I was, I helped Dr.King get this apparatus that, that we just used to set up these fragment, get that up and running. And, and so during my postdoc, I had a lot of experience with both widefield with TimeLapse imaging on our scope, which is the widefield and also TimeLapse imaging with confocal microscopy.And I would say that it's really powerful. You get a lot of information, but it's not easy to get working perfectly. So it really requires a lot of attention and a lot of attention to details at every little step of the process.And, and then you still have problems. So it's a tough application, but you can really get, if, if it's what you need to have to, to study your problem, your scientific problem, then it, it's invaluable in that respect, but it's tough. So find someone who knows what they're doing and use them.That's my advice. So good.

Trypsinizing and Subculturing Mammalian Cells

As cells reach confluency, they must be subcultured or passaged. Failure to subculture confluent cells results in reduced mitotic index and eventually in cell death. The first step in subculturing is to detach cells from the surface of the primary culture vessel by trypsinization or mechanical means. The resultant cell suspension is then subdivided, or reseeded, into fresh cultures. Secondary cultures are checked for growth and fed periodically, and may be subsequently subcultured to produce tertiary cultures. The time between passaging of cells varies with the cell line and depends on the growth rate.

As cells reach confluency, they must be subcultured or passaged. This video will demonstrate a procedure for subculturing both adherent and suspension cells.

As cells reach confluency, they must be subcultured or passaged. Failure to subculture confluent cells results in reduced mitotic index and eventually in ...

Engineering Cell-permeable Protein

The protein transduction technique enables the direct delivery of biologically active material into mammalian cells [for review see 1,2]. For this one can make use of the translocating ability of so-called cell penetrating peptides (CPPs), also designated as protein transduction domains (PTDs). The TAT-CPP derived from the human immunodeficiency virus type 1 (HIV-1) Tat (trans-activator of transcription) protein has been widely used. The positively charged TAT promotes cell permeability thereby overcoming the barriers of the cellular membrane by endocytosis or/and direct membrane penetration2. In combination with a nuclear localization signal (NLS) fusion proteins are able to enter the nucleus exhibiting functionality. Our video presentation demonstrates, as an exemplification for the engineering of cell-permeable proteins, the construction, production and application of a cell-permeable version of the DNA-modifying enzyme Cre.
Cre is a site-specific recombinase that is able to recognize and recombine 34 base pair loxP sites in mammalian cells in vitro and in vivo. Therefore the Cre/loxP system is widely used to conditionally induce mutations in the genome of living cells3,4. The delivery of active Cre recombinase to cells, however, represents a limitation.
We describe the pSESAME vector system, which allows a direct insertion of the gene-of-interest and provides a platform to rapidly clone different domains and tags used within the vector in a convenient and standardized manner. Rearranging of the different tags has been shown to modify the biochemical properties of the fusion proteins providing a possibility to achieve higher yield and better solubility. We demonstrate how to express and purify recombinant cell-permeant proteins in and from E. coli. The functionality of the recombinant Cre protein is finally validated in cell culture by assessing its intracellular recombinase activity.

Protein transduction enables the direct delivery of biologically active proteins into cells. In contrast to conventional methods such as DNA transfection or viral transduction this non-invasive paradigm allows highly efficient cellular manipulation in a titratable manner circumventing cellular toxicity and the risk of oncogenic transformation by permanent genetic modification.

The protein transduction technique enables the direct delivery of biologically active material into mammalian cells [for review see 1,2]. For this one can ...

Using the GELFREE 8100 Fractionation System for Molecular Weight-Based Fractionation with Liquid Phase Recovery

The GELFREE 8100 Fractionation System is a novel protein fractionation system designed to maximize protein recovery during molecular weight based fractionation. The system is comprised of single-use, 8-sample capacity cartridges and a benchtop GELFREE Fractionation Instrument. During separation, a constant voltage is applied between the anode and cathode reservoirs, and each protein mixture is electrophoretically driven from a loading chamber into a specially designed gel column gel. Proteins are concentrated into a tight band in a stacking gel, and separated based on their respective electrophoretic mobilities in a resolving gel. As proteins elute from the column, they are trapped and concentrated in liquid phase in the collection chamber, free of the gel. The instrument is then paused at specific time intervals, and fractions are collected using a pipette. This process is repeated until all desired fractions have been collected. If fewer than 8 samples are run on a cartridge, any unused chambers can be used in subsequent separations.
This novel technology facilitates the quick and simple separation of up to 8 complex protein mixtures simultaneously, and offers several advantages when compared to previously available fractionation methods. This system is capable of fractionating up to 1mg of total protein per channel, for a total of 8mg per cartridge. Intact proteins over a broad mass range are separated on the basis of molecular weight, retaining important physiochemical properties of the analyte. The liquid phase entrapment provides for high recovery while eliminating the need for band or spot cutting, making the fractionation process highly reproducible1.

The accompanying video describes the use of the GELFREE 8100 Fractionation System, which partitions complex protein samples on the basis of molecular weight and recovers the fractions in liquid phase. The video describes how the technology works, how it is used, and provides resultant data, with polyacrylamide gel electrophoresis analysis of fractionated bovine liver homogenate.

The GELFREE 8100 Fractionation System is a novel protein fractionation system designed to maximize protein recovery during molecular weight based ...

Genome Editing with CompoZr Custom Zinc Finger Nucleases (ZFNs)

Genome editing is a powerful technique that can be used to elucidate gene function and the genetic basis of disease. Traditional gene editing methods such as chemical-based mutagenesis or random integration of DNA sequences confer indiscriminate genetic changes in an overall inefficient manner and require incorporation of undesirable synthetic sequences or use of aberrant culture conditions, potentially confusing biological study. By contrast, transient ZFN expression in a cell can facilitate precise, heritable gene editing in a highly efficient manner without the need for administration of chemicals or integration of synthetic transgenes.
Zinc finger nucleases (ZFNs) are enzymes which bind and cut distinct sequences of double-stranded DNA (dsDNA). A functional CompoZr ZFN unit consists of two individual monomeric proteins that bind a DNA "half-site" of approximately 15-18 nucleotides (see Figure 1). When two ZFN monomers "home" to their adjacent target sites the DNA-cleavage domains dimerize and create a double-strand break (DSB) in the DNA.1 Introduction of ZFN-mediated DSBs in the genome lays a foundation for highly efficient genome editing. Imperfect repair of DSBs in a cell via the non-homologous end-joining (NHEJ) DNA repair pathway can result in small insertions and deletions (indels). Creation of indels within the gene coding sequence of a cell can result in frameshift and subsequent functional knockout of a gene locus at high efficiency.2 While this protocol describes the use of ZFNs to create a gene knockout, integration of transgenes may also be conducted via homology-directed repair at the ZFN cut site.
The CompoZr Custom ZFN Service represents a systematic, comprehensive, and well-characterized approach to targeted gene editing for the scientific community with ZFN technology. Sigma scientists work closely with investigators to 1) perform due diligence analysis including analysis of relevant gene structure, biology, and model system pursuant to the project goals, 2) apply this knowledge to develop a sound targeting strategy, 3) then design, build, and functionally validate ZFNs for activity in a relevant cell line. The investigator receives positive control genomic DNA and primers, and ready-to-use ZFN reagents supplied in both plasmid DNA and in-vitro transcribed mRNA format. These reagents may then be delivered for transient expression in the investigator&#x2019;s cell line or cell type of choice. Samples are then tested for gene editing at the locus of interest by standard molecular biology techniques including PCR amplification, enzymatic digest, and electrophoresis. After positive signal for gene editing is detected in the initial population, cells are single-cell cloned and genotyped for identification of mutant clones/alleles.

Genome Editing with CompoZr Custom Zinc Finger Nucleases ZFNs

The CompoZr Custom Zinc-Finger Nuclease (ZFN) Service enables precise genome editing in any organism or cell line at any locus defined by the user. This article describes the process for the design, manufacture, validation and implementation of the CompoZr Custom ZFN Service.

Genome editing is a powerful technique that can be used to elucidate gene function and the genetic basis of disease. Traditional gene editing methods such ...

Investigating Protein-protein Interactions in Live Cells Using Bioluminescence Resonance Energy Transfer

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live cells. BRET is the non-radiative transfer of energy from a 'donor' luciferase enzyme to an 'acceptor' fluorescent protein. In the most common configuration of this assay, the donor is Renilla reniformis luciferase and the acceptor is Yellow Fluorescent Protein (YFP). Because the efficiency of energy transfer is strongly distance-dependent, observation of the BRET phenomenon requires that the donor and acceptor be in close proximity. To test for an interaction between two proteins of interest in cultured mammalian cells, one protein is expressed as a fusion with luciferase and the second as a fusion with YFP. An interaction between the two proteins of interest may bring the donor and acceptor sufficiently close for energy transfer to occur. Compared to other techniques for investigating protein-protein interactions, the BRET assay is sensitive, requires little hands-on time and few reagents, and is able to detect interactions which are weak, transient, or dependent on the biochemical environment found within a live cell. It is therefore an ideal approach for confirming putative interactions suggested by yeast two-hybrid or mass spectrometry proteomics studies, and in addition it is well-suited for mapping interacting regions, assessing the effect of post-translational modifications on protein-protein interactions, and evaluating the impact of mutations identified in patient DNA.

Interactions between proteins are fundamental to all cellular processes. Using Bioluminescence Resonance Energy Transfer, the interaction between a pair of proteins can be monitored in live cells and in real time. Furthermore, the effects of potentially pathogenic mutations can be assessed.

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live ...

siRNA Screening to Identify Ubiquitin and Ubiquitin-like System Regulators of Biological Pathways in Cultured Mammalian Cells

Post-translational modification of proteins with ubiquitin and ubiquitin-like molecules (UBLs) is emerging as a dynamic cellular signaling network that regulates diverse biological pathways including the hypoxia response, proteostasis, the DNA damage response and transcription.&#160; To better understand how UBLs regulate pathways relevant to human disease, we have compiled a human siRNA &#8220;ubiquitome&#8221; library consisting of 1,186 siRNA duplex pools targeting all known and predicted components of UBL system pathways. This library can be screened against a range of cell lines expressing reporters of diverse biological pathways to determine which UBL components act as positive or negative regulators of the pathway in question.&#160; Here, we describe a protocol utilizing this library to identify ubiquitome-regulators of the HIF1A-mediated cellular response to hypoxia using a transcription-based luciferase reporter.&#160; An initial assay development stage is performed to establish suitable screening parameters of the cell line before performing the screen in three stages: primary, secondary and tertiary/deconvolution screening. &#160;The use of targeted over whole genome siRNA libraries is becoming increasingly popular as it offers the advantage of reporting only on members of the pathway with which the investigators are most interested.&#160; Despite inherent limitations of siRNA screening, in particular false-positives caused by siRNA off-target effects, the identification of genuine novel regulators of the pathways in question outweigh these shortcomings, which can be overcome by performing a series of carefully undertaken control experiments.

Here, we describe a methodology to perform a targeted siRNA &#8220;ubiquitome&#8221; screen to identify novel ubiquitin and ubiquitin-like regulators of the HIF1A-mediated cellular response to hypoxia.&#160; This can be adapted to any biological pathway where a robust read out of reporter activity is available.

Post-translational modification of proteins with ubiquitin and ubiquitin-like molecules (UBLs) is emerging as a dynamic cellular signaling network that ...

Identification of Protein Interaction Partners in Mammalian Cells Using SILAC-immunoprecipitation Quantitative Proteomics

Quantitative proteomics combined with immuno-affinity purification, SILAC immunoprecipitation, represent a powerful means for the discovery of novel protein:protein interactions. By allowing the accurate relative quantification of protein abundance in both control and test samples, true interactions may be easily distinguished from experimental contaminants. Low affinity interactions can be preserved through the use of less-stringent buffer conditions and remain readily identifiable. This protocol discusses the labeling of tissue culture cells with stable isotope labeled amino acids, transfection and immunoprecipitation of an affinity tagged protein of interest, followed by the preparation for submission to a mass spectrometry facility. This protocol then discusses how to analyze and interpret the data returned from the mass spectrometer in order to identify cellular partners interacting with a protein of interest. As an example this technique is applied to identify proteins binding to the eukaryotic translation initiation factors: eIF4AI and eIF4AII.

SILAC immunoprecipitation experiments represent a powerful means for discovering novel protein:protein interactions. By allowing the accurate relative quantification of protein abundance in both control and test samples, true interactions may be easily distinguished from experimental contaminants, and low affinity interactions preserved through use of less-stringent buffer conditions.

Quantitative proteomics combined with immuno-affinity purification, SILAC immunoprecipitation, represent a powerful means for the discovery of novel ...

Zinc-finger Nuclease Enhanced Gene Targeting in Human Embryonic Stem Cells

One major limitation with current human embryonic stem cell (ESC) differentiation protocols is the generation of heterogeneous cell populations.&#160;These cultures contain the cells of interest, but are also contaminated with undifferentiated ESCs, non-neural derivatives and other neuronal subtypes.&#160; This limits their use in in vitro and in vivo applications, such as in vitro modeling for drug discovery or cell replacement therapy. To help overcome this, reporter cell lines, which offer a means to visualize, track and isolate cells of interest, can be engineered.&#160;However, to achieve this in human embryonic stem cells via conventional homologous recombination is extremely inefficient.&#160;This protocol describes targeting of the Pituitary homeobox 3 (PITX3) locus in human embryonic stem cells using custom designed zinc-finger nucleases, which introduce site-specific double-strand DNA breaks, together with a PITX3-EGFP-specific DNA donor vector. Following the generation of the PITX3 reporter cell line, it can then be differentiated using published protocols for use in studies such as in vitro Parkinson&#8217;s disease modeling or cell replacement therapy.

Reporter cell lines offer a means to visualize, track and isolate cells of interest from heterogeneous populations.&#160;However, gene-targeting using conventional homologous recombination in human embryonic stem cells is extremely inefficient. Herein, we describe targeting CNS midbrain specific transcription factor PITX3 locus with EGFP using zinc-finger nuclease enhanced homologous recombination.

One major limitation with current human embryonic stem cell (ESC) differentiation protocols is the generation of heterogeneous cell ...

Green Fluorescent Protein-based Expression Screening of Membrane Proteins in Escherichia coli

The production of recombinant membrane proteins for structural and functional studies remains technically challenging due to low levels of expression and the inherent instability of many membrane proteins once solubilized in detergents. A protocol is described that combines ligation independent cloning of membrane proteins as GFP fusions with expression in Escherichia coli detected by GFP fluorescence. This enables the construction and expression screening of multiple membrane protein/variants to identify candidates suitable for further investment of time and effort. The GFP reporter is used in a primary screen of expression by visualizing GFP fluorescence following SDS polyacrylamide gel electrophoresis (SDS-PAGE). Membrane proteins that show both a high expression level with minimum degradation as indicated by the absence of free GFP, are selected for a secondary screen. These constructs are scaled and a total membrane fraction prepared and solubilized in four different detergents. Following ultracentrifugation to remove detergent-insoluble material, lysates are analyzed by fluorescence detection size exclusion chromatography (FSEC). Monitoring the size exclusion profile by GFP fluorescence provides information about the mono-dispersity and integrity of the membrane proteins in different detergents. Protein: detergent combinations that elute with a symmetrical peak with little or no free GFP and minimum aggregation are candidates for subsequent purification. Using the above methodology, the heterologous expression in E. coli of SED (shape, elongation, division, and sporulation) proteins from 47 different species of bacteria was analyzed. These proteins typically have ten transmembrane domains and are essential for cell division. The results show that the production of the SEDs orthologues in E. coli was highly variable with respect to the expression levels and integrity of the GFP fusion proteins. The experiment identified a subset for further investigation.

Green Fluorescent Protein-based Expression Screening of Membrane Proteins in Escherichia coli

A streamlined approach to screening for the expression of recombinant membrane proteins in Escherichia coli based on fusion to green fluorescent protein is presented.

The production of recombinant membrane proteins for structural and functional studies remains technically challenging due to low levels of expression and ...