Este trabalho foi financiado pela Estação Experimental Agrícola da Universidade de Cornell (CUAES) NYC-125433 escotilha Grant e Cornell Start-Up Grant concedido a OKV

Parte 1. Preparação de meio sólido para o crescimento das plantas. Normalmente, as plantas de cultura concentrada Murasige e Skoog (MS) suplementado com 1% de sacarose e ágar 0,7%. Ele contém todos os ingredientes necessários para manter as plantas saudáveis. Para preparar 1L de MS, pH 5,7 mídia <ol><li> Adicionar 2,15 g de MS pó em 800 ml de água em 1,5 2.0L garrafa autoclavável. </li><li> Colocar uma barra de agitação dentro da garrafa e dissolver o pó MS por meio de agitação médio em uma placa de agitação. </li><li> Agitando, adicione, gota a gota, KOH 1N para ajustar o pH do meio MS para 5,7. </li><li> Adicionar 10 g de sacarose, continue a mexer. </li><li> Adicionar 7 g de ágar *. </li><li> Ajustar o volume final do meio preparado para 1000 ml e esterilizar em autoclave .* </li><li> Lugar autoclavado médio em uma placa de agitação e esfriá-la, agitando, de modo que agar não irá precipitar no fundo da garrafa. Arrefecer médio a ~ 60 ° C. * </li><li> Colocar 100 milímetros placas de Petri. Manter placas a 4 ° C. </li></ol> * Dica 1: Não tente dissolver agar. Ele irá solubilizar durante autoclavagem. * Dica 2: Manter a barra de agitação em uma garrafa durante a autoclavagem, você vai precisar dele mais tarde. * Dica 3: Se você pode manter suas mãos no frasco autoclavado por 10 s, isso significa que o meio esfriou o suficiente e você pode começar a verter placas. Parte 2. Material vegetal e as condições de crescimento. <ol><li> Esterilizar sementes de Arabidopsis thaliana <ol><li> Coloque 100 mg de sementes em tubos de microcentrífuga eppendorf e adicionar 1 ml de etanol 70%. Misturar bem e incubar por 2 min. Spin-baixo sementes, aspirar o sobrenadante. </li><li> Adicionar 1 ml de solução de água sanitária 1,8% * contendo 0,1% Tween-20. Misture por 10 min. Spin down sementes e solução de água sanitária aspirar. </li><li> Este passo tem que ser feito em uma capela de fluxo laminar. Adicionar 1 ml de água estéril para sementes, misture bem. Spin down sementes, aspirar água. Repita este passo 5 vezes. </li></ol></li><li> Espalhar sementes para o preparado na etapa 1 placas (100 sementes / placa). </li><li> Manter placas semeadas por 24-48 horas a 4 ° C no escuro por estratificação. </li><li> Crescer as plantas por 14 dias na câmara de crescimento com 8 h light/16 h escuro fotoperíodo (a uma densidade de fluxo de fótons fotossinteticamente ativos de 250 mmol m -2 s -1) em 23 / ​​19 ° C de temperatura regime de claro / escuro e relativa de 75% umidade. </li></ol> * Dica 1: solução de água sanitária é feita por diluição-up uma casa Clorox, contendo hipoclorito de sódio 6% e adição de Tween-20 a uma concentração final de 0,1%. Parte 3. Isolamento de protoplastos a partir de mudas de Arabidopsis. <ol><li> Slice 2 g de 14 dias de idade, mudas com uma lâmina de barbear fresco em 15 ml de solução esterilizada por filtração, TVL. Nós dividimos o material vegetal em pratos descartáveis ​​estéreis Petri. </li><li> Transferência de tecidos cortados em 200 ml copo, adicione 20 ml de solução enzimática, esterilizada por filtração, redemoinho o copo para que os tecidos se misturam com solução enzimática, cubra com parafilme e papel alumínio. </li><li> Agite tecidos da planta em 35 rpm, no escuro em temperatura ambiente por 16-18 h. </li><li> Recolher os protoplastos liberados em 50 tubos Falcon ml por peneiramento a 8 camadas de pano de queijo, pré-molhada em solução W5. </li><li> Protoplastos peneira do queijo de pano mais uma vez, lavando o pano com 15 ml de solução W5. </li><li> Cuidadosamente protoplastos overlay com 10 ml de solução W5, não perturbem o gradiente de açúcar; centrífuga por 7 min a 100 g. </li><li> Coletar 10 ml de protoplastos na interface da solução enzimática e solução W5 (Figura 1B) e transferir para um novo tubo de 50 ml Falcon. </li><li> Adicionar 15 ml da solução W5, centrifugar por 5 min a 60 g. Remover o sobrenadante. </li><li> Lavar protoplastos livre de solução enzimática pela ressuspensão de protoplastos em 15ml de solução W5 centrífuga, por 5min a 60 g </li><li> Remover o sobrenadante, ressuspender protoplastos peletizada em 1-3ml solução W5. </li><li> Avaliar o rendimento de protoplastos por célula contando com um hemocitômetro. </li></ol> Parte 4. Reagentes: TVL: 0,3 M sorbitol; 50 mM CaCl 2 Filter-esterilizar e armazenar a -20 ° C. Solução da enzima: 0,5 M de sacarose, 10 mM MES-KOH [pH 5,7], 20 mM CaCl 2, 40 mM KCl, celulase 1% (Onozuka R-10), Macerozyme 1% (R10). Filtro de esterilizar e recém-uso. W5 Solução: 0,1% (w / v) de glicose, 0,08% (w / v) KCl, 0,9% (w / v) de NaCl, 1,84% (w / v) CaCl 2, 2 mM MES-KOH pH 5.7. Filtro de esterilizar e armazenar à temperatura ambiente. Parte 5: Resultados Representante: Usando condições de cultura Arabidopsis descrito nas partes 1 e 2 torna mudas sadias, servem para isolar protoplastos (Fig. 1A). Protoplastos são purificados pelo sacarose densidade Gradicentrifugação ent e recolhidos na interface da W5 e soluções de enzimas (Figura 1B). Usando o procedimento de protoplastos de isolamento descritas na Parte 3, tipicamente colheita outubro 05-10 6 de protoplastos intactos (Fig. 1C) de um grama de mudas frescas. <img src="/files/ftp_upload/1149/Fig1.jpg" alt="Figura 1" /> Figura 1. Isolamento de protoplastos a partir de mudas de Arabidopsis. A, tecidos de 14 dias de idade, mudas de Arabidopsis foram coletados e convertidos em protoplastos através de um procedimento modificado de (Chen e Halkier, 2000). B, Protoplastos foram purificadas por centrifugação em gradiente de densidade de sacarose e recolhidos na interface da solução de enzima e W5 uffer (setas brancas). C, Bright microscopia de campo de protoplastos. Microfotografias foram coletados por meio de uma câmera CCD refrigerado interface com o Axioscope Zeiss 2 mais microscópio.

<ol>
	<li>Cocking, E. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Method+for+the+Isolation+of+Plant+Protoplasts+and+Vacuoles.">A Method for the Isolation of Plant Protoplasts and Vacuoles.</a> Nature. 187, 962-963 (1960).</li><li>Chen, S., Halkier, B. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+glucosinolate+uptake+by+leaf+protoplasts+of+Brassica+napus.">Characterization of glucosinolate uptake by leaf protoplasts of Brassica napus.</a> J Biol Chem. 275, 22955-22960 (2000).</li><li>Robert, S., Zouhar, J., Carter, C., Raikhel, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation+of+intact+vacuoles+from+Arabidopsis+rosette+leaf-derived+protoplasts.">Isolation of intact vacuoles from Arabidopsis rosette leaf-derived protoplasts.</a> Nat. Protocols. 2, 259-262 (2007).</li><li>Yoo, S. D., Cho, Y. H., Sheen, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arabidopsis+mesophyll+protoplasts:+a+versatile+cell+system+for+transient+gene+expression+analysis.">Arabidopsis mesophyll protoplasts: a versatile cell system for transient gene expression analysis.</a> Nat Protoc. 2, 1565-1572 (2007).</li><li>Zhai, Z., Sooksa-nguan, T., Vatamaniuk, O. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Establishing+RNAi+as+a+reverse+genetic+approach+for+gene+functional+analysis+in+protoplasts.">Establishing RNAi as a reverse genetic approach for gene functional analysis in protoplasts.</a> Plant Phys. 149, 642-652 (2009).</li></ol>

A patente provisória que descreve este procedimento para a sua utilização em análises funcionais de genes de plantas foram arquivados com Cornell Centro para a Empresa de Tecnologia e Comercialização (CCTEC), junho de 2008. Docket 50341/015001: Vatamaniuk, OK, e Zhai, Z. Método para rápida análise funcional de genes da planta.

Para garantir o alto rendimento de protoplastos intactos é muito importante para start-up com as plantas saudáveis. Use filtro esterilizar soluções para isolar protoplastos. Lembre-se que protoplastos são frágeis. Portanto, quando você está lidando com protoplastos, não se misturam, pipeta ou vortex-os vigorosamente, uma vez que vai de freio-los. Em vez disso, misture protoplastos girando lentamente ou com fita do tubo de centrifugação. O procedimento descrito rendimento de protoplastos intactos que são viáveis ​​para pelo menos 96 h. Portanto, protoplastos pode ser usado para estudar uma variedade de processos celulares, tais como localização subcelular de proteínas, isolamento e análises de organelas intactas e orientada inativação de genes por double-stranded RNA de interferência (RNAi), etc 3-5.

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Murashige and Skoog Basal Salt Mixture (MS)</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>M5524</td>
<td>&nbsp;</td>
<tr>
<td>Agar</td>
<td>&nbsp;</td>
<td>Sigma</td>
<td>A1296</td>
<td>&nbsp;</td>
<tr>
<td>Petri Dishes (100x15mm)</td>
<td>&nbsp;</td>
<td>Kreckeler Scientific</td>
<td>82-4001</td>
<td>&nbsp;</td>
<tr>
<td>Cellulase (Onozuka R&#x2010;10)</td>
<td>&nbsp;</td>
<td>RPI Corp</td>
<td>C32200</td>
<td>&nbsp;</td>
<tr>
<td>Macerozyme (R10)</td>
<td>&nbsp;</td>
<td>RPI Corp</td>
<td>M22010</td>
<td>&nbsp;</td>
<tr>
<td>Cheesecloth wipes</td>
<td>&nbsp;</td>
<td>Fisher Scientific</td>
<td>06-665-29</td>
<td>&nbsp;</td>
<tr>
<td>Lab Rotator</td>
<td>&nbsp;</td>
<td>Fisher Scientific</td>
<td>1167152Q</td>
<td>&nbsp;</td>
<tr>
<td>Allegra X&#x2010;15R Centrifuge</td>
<td>&nbsp;</td>
<td>VWR</td>
<td>392932</td>
<td>&nbsp;</td>
<tr>
<td>Axioskop2 Plus Microscope</td>
<td>&nbsp;</td>
<td>Zeiss</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

isolation of protoplasts from tissues of 14-day-old seedlings of arabidopsis thaliana

Protoplastos são células vegetais que tiveram suas paredes celulares enzimaticamente removido. Isolamento de protoplastos a partir de tecidos diferentes de plantas foi relatada pela primeira vez mais de 40 anos atrás<sup&gt; 1</sup&gt; E desde então tem sido adaptado para estudar uma variedade de processos celulares, tais como localização subcelular de proteínas, o isolamento de organelas intactas e orientada inativação de genes por interferência de RNA dupla fita (RNAi)<sup&gt; 05/02</sup&gt;. A maioria dos protocolos de isolamento de protoplastos use tecidos de folhas de Arabidopsis maduros (por exemplo, 35 dias de idade das plantas)<sup&gt; 04/02</sup&gt;. Nós modificamos os protocolos existentes, empregando mudas de 14 dias de idade Arabidopsis. Neste procedimento, um grama de 14 dias de idade mudas rendeu 5 10<sup&gt; 6</sup&gt; -10<sup&gt; 7</sup&gt; Protoplastos que permanecem intactos, pelo menos, 96 horas. O rendimento de protoplastos a partir de mudas é comparável com os preparativos das folhas de Arabidopsis maduro, mas ao invés de 35-36 dias, o isolamento de protoplastos é concluído em 15 dias. Isto permite diminuir o tempo eo espaço câmara de crescimento que são necessários para isolar protoplastos quando as plantas maduras são usadas, e acelera os estudos a jusante que exigem protoplastos intactos.

Watch this Scientific Journal Video about Isolation of Protoplasts from Tissues of 14-day-old Seedlings of Arabidopsis thaliana at JoVE.com

Isolation of Protoplasts from Tissues of 14-day-old Seedlings of Arabidopsis thaliana

Este vídeo mostra um procedimento para isolar protoplastos intactos a partir de tecidos de 14 dias de idade, mudas de Arabidopsis. Dado que o protoplastos isolados permanecem intactos por pelo menos 96h e são isoladas de mudas, em vez de um mês de idade plantas maduras, esse procedimento agiliza ensaios exigindo protoplastos intactos.

Isolamento de Protoplastos de tecidos de 14 dias de idade, mudas de Arabidopsis thaliana</em

Protoplasts are plant cells that have had their cell walls enzymatically removed. Isolation of protoplasts  from different plant tissues was first ...

isolation-protoplasts-from-tissues-14-day-old-seedlings-arabidopsis

Nanyang Technological University

Research

JoVE Journal

Biology

Isolation of Protoplasts from Tissues of 14-day-old Seedlings of Arabidopsis thaliana

35.9K visualizações.  Cornell University. Este vídeo mostra um procedimento para isolar protoplastos intactos a partir de tecidos de 14 dias de idade, mudas de Arabidopsis. Dado que o protoplastos isolados permanecem intactos por pelo menos 96h e são isoladas de mudas, em vez de um mês de idade plantas maduras, esse procedimento agiliza ensaios exigindo protoplastos intactos.

Vídeo: Isolation of Protoplasts from Tissues of 14-day-old Seedlings of Arabidopsis thaliana

Fluorescence Activated Cell Sorting of Plant Protoplasts

High-resolution, cell type-specific analysis of gene expression greatly enhances understanding of developmental regulation and responses to environmental stimuli in any multicellular organism. In situ hybridization and reporter gene visualization can to a limited extent be used to this end but for high resolution quantitative RT-PCR or high-throughput transcriptome-wide analysis the isolation of RNA from particular cell types is requisite. Cellular dissociation of tissue expressing a fluorescent protein marker in a specific cell type and subsequent Fluorescence Activated Cell Sorting (FACS) makes it possible to collect sufficient amounts of material for RNA extraction, cDNA synthesis/amplification and microarray analysis.
An extensive set of cell type-specific fluorescent reporter lines is available to the plant research community. In this case, two marker lines of the Arabidopsis thaliana root are used: PSCR::GFP (endodermis and quiescent center) and PWOX5::GFP (quiescent center). Large numbers (thousands) of seedlings are grown hydroponically or on agar plates and harvested to obtain enough root material for further analysis. Cellular dissociation of plant material is achieved by enzymatic digestion of the cell wall. This procedure makes use of high osmolarity-induced plasmolysis and commercially available cellulases, pectinases and hemicellulases to release protoplasts into solution.
FACS of GFP-positive cells makes use of the visualization of the green versus the red emission spectra of protoplasts excited by a 488 nm laser. GFP-positive protoplasts can be distinguished by their increased ratio of green to red emission. Protoplasts are typically sorted directly into RNA extraction buffer and stored for further processing at a later time.
This technique is revealed to be straightforward and practicable. Furthermore, it is shown that it can be used without difficulty to isolate sufficient numbers of cells for transcriptome analysis, even for very scarce cell types (e.g. quiescent center cells). Lastly, a growth setup for Arabidopsis seedlings is demonstrated that enables uncomplicated treatment of the plants prior to cell sorting (e.g. for the cell type-specific analysis of biotic or abiotic stress responses). Potential supplementary uses for FACS of plant protoplasts are discussed.

A method for isolating specific cell types from plant material is demonstrated. This technique employs transgenic marker lines expressing fluorescent proteins in particular cell types, cellular dissociation and Fluorescence Activated Cell Sorting. Additionally, a growth setup is established here that facilitates treatment of Arabidopsis thaliana seedlings prior to cell sorting.

Separação de células de fluorescência Activated de Protoplastos Usina

High-resolution, cell type-specific analysis of gene expression greatly enhances understanding of developmental regulation and responses to environmental ...

Biologia

Floral-dip Transformation of Arabidopsis thaliana to Examine pTSO2::&beta;-glucuronidase Reporter Gene Expression

The ability to introduce foreign genes into an organism is the foundation for modern biology and biotechnology. In the model flowering plant Arabidopsis thaliana, the floral-dip transformation method1-2 has replaced all previous methods because of its simplicity, efficiency, and low cost. Specifically, shoots of young flowering Arabidopsis plants are dipped in a solution of Agrobacterium tumefaciens carrying specific plasmid constructs. After dipping, the plants are returned to normal growth and yield seeds, a small percentage of which are transformed with the foreign gene and can be selected for on medium containing antibiotics. This floral-dip method significantly facilitated Arabidopsis research and contributed greatly to our understanding of plant gene function. In this study, we use the floral-dip method to transform a reporter gene, &beta;-glucuronidase (GUS), under the control of TSO2 promoter. TSO2, coding for the Ribonucleotide Reductase (RNR) small subunit3, is a cell cycle regulated gene essential for dNDP biosynthesis in the S-phase of the cell cycle. Examination of GUS expression in transgenic Arabidopsis seedlings shows that TSO2 is expressed in actively dividing tissues. The reported experimental method and materials can be easily adapted not only for research but also for education at high school and college levels.

Floral-dip Transformation of Arabidopsis thaliana to Examine pTSO2::&#946;-glucuronidase Reporter Gene Expression

This article illustrates the floral-dip method of Agrobacterium tumefaciens -mediated transformation of Arabidopsis thaliana. By introducing a cell-cycle regulated promoter-reporter, pTSO2::&beta;-glucuronidase (GUS), into Arabidopsis, we illustrates how one detects GUS reporter expression in transgenic seedlings.

Floral-dip Transformação de Arabidopsis thaliana Examine a PTSO2:: β-glucuronidase Expressão Gênica Reporter

The ability to introduce foreign genes into an organism is the foundation for modern biology and biotechnology. In the model flowering plant Arabidopsis ...

Arabidopsis thaliana Polar Glycerolipid Profiling by Thin Layer Chromatography (TLC) Coupled with Gas-Liquid Chromatography (GLC)

Biological membranes separate cells from the environment. From a single cell to multicellular plants and animals, glycerolipids, such as phosphatidylcholine or phosphatidylethanolamine, form bilayer membranes which act as both boundaries and interfaces for chemical exchange between cells and their surroundings. Unlike animals, plant cells have a special organelle for photosynthesis, the chloroplast. The intricate membrane system of the chloroplast contains unique glycerolipids, namely glycolipids lacking phosphorus: monogalactosyldiacylglycerol (MGDG), digalactosyldiacylglycerol (DGDG), sulfoquinovosyldiacylglycerol (SQDG)4. The roles of these lipids are beyond simply structural. These glycolipids and other glycerolipids were found in the crystal structures of photosystem I and II indicating the involvement of glycerolipids in photosynthesis8,11. During phosphate starvation, DGDG is transferred to extraplastidic membranes to compensate the loss of phospholipids9,12.
Much of our knowledge of the biosynthesis and function of these lipids has been derived from a combination of genetic and biochemical studies with Arabidopsis thaliana14. During these studies, a simple procedure for the analysis of polar lipids has been essential for the screening and analysis of lipid mutants and will be outlined in detail. A leaf lipid extract is first separated by thin layer chromatography (TLC) and glycerolipids are stained reversibly with iodine vapor. The individual lipids are scraped from the TLC plate and converted to fatty acyl methylesters (FAMEs), which are analyzed by gas-liquid chromatography coupled with flame ionization detection (FID-GLC) (Figure 1). This method has been proven to be a reliable tool for mutant screening. For example, the tgd1,2,3,4 endoplasmic reticulum-to-plastid lipid trafficking mutants were discovered based on the accumulation of an abnormal galactoglycerolipid: trigalactosyldiacylglycerol (TGDG) and a decrease in the relative amount of 18:3 (carbons : double bonds) fatty acyl groups in membrane lipids 3,13,18,20. This method is also applicable for determining enzymatic activities of proteins using lipids as substrate6.

Arabidopsis thaliana Polar Glycerolipid Profiling by Thin Layer Chromatography TLC Coupled with Gas-Liquid Chromatography GLC

Composition of polar lipid extracts and the fatty acid composition of individual glycerolipids are determined in a simple and robust lipid profiling experiment. For this purpose, glycerolipids are isolated by thin layer chromatography and subjected to transmethylation of their acyl groups. Fatty acyl methylesters are quantified by gas-liquid chromatography.

Arabidopsis thaliana Profiling Glycerolipid Polar por cromatografia em camada delgada (TLC) Juntamente com Cromatografia gás-líquido (GLC)

Biological membranes separate cells from the environment. From a single cell to multicellular plants and animals, glycerolipids, such as ...

Efficient and Rapid Isolation of Early-stage Embryos from Arabidopsis thaliana Seeds

In flowering plants, the embryo develops within a nourishing tissue - the endosperm - surrounded by the maternal seed integuments (or seed coat). As a consequence, the isolation of plant embryos at early stages (1 cell to globular stage) is technically challenging due to their relative inaccessibility. Efficient manual dissection at early stages is strongly impaired by the small size of young Arabidopsis seeds and the adhesiveness of the embryo to the surrounding tissues. Here, we describe a method that allows the efficient isolation of young Arabidopsis embryos, yielding up to 40 embryos in 1 hr to 4 hr, depending on the downstream application. Embryos are released into isolation buffer by slightly crushing 250-750 seeds with a plastic pestle in an Eppendorf tube. A glass microcapillary attached to either a standard laboratory pipette (via a rubber tube) or a hydraulically controlled microinjector is used to collect embryos from droplets placed on a multi-well slide on an inverted light microscope. The technical skills required are simple and easily transferable, and the basic setup does not require costly equipment. Collected embryos are suitable for a variety of downstream applications such as RT-PCR, RNA sequencing, DNA methylation analyses, fluorescence in situ hybridization (FISH), immunostaining, and reporter gene assays.

Efficient and Rapid Isolation of Early-stage Embryos from Arabidopsis thaliana Seeds

We report an efficient and simple method to isolate embryos at early stages of development from Arabidopsis thaliana seeds. Up to 40 embryos can be isolated in 1 hr to 4 hr, depending on the downstream application. The procedure is suitable for transcriptome, DNA methylation, reporter gene expression, immunostaining and fluorescence in situ hybridization analyses.

Isolamento eficiente e rápida de embriões em início de carreira a partir de<em&gt; Arabidopsis thaliana</em&gt; Sementes

In flowering plants, the embryo develops within a nourishing tissue - the endosperm - surrounded by the maternal seed integuments (or seed coat). As a ...

Metabolic Labeling and Membrane Fractionation for Comparative Proteomic Analysis of Arabidopsis thaliana Suspension Cell Cultures

Plasma membrane microdomains are features based on the physical properties of the lipid and sterol environment and have particular roles in signaling processes. Extracting sterol-enriched membrane microdomains from plant cells for proteomic analysis is a difficult task mainly due to multiple preparation steps and sources for contaminations from other cellular compartments. The plasma membrane constitutes only about 5-20% of all the membranes in a plant cell, and therefore isolation of highly purified plasma membrane fraction is challenging. A frequently used method involves aqueous two-phase partitioning in polyethylene glycol and dextran, which yields plasma membrane vesicles with a purity of 95% 1. Sterol-rich membrane microdomains within the plasma membrane are insoluble upon treatment with cold nonionic detergents at alkaline pH. This detergent-resistant membrane fraction can be separated from the bulk plasma membrane by ultracentrifugation in a sucrose gradient 2. Subsequently, proteins can be extracted from the low density band of the sucrose gradient by methanol/chloroform precipitation. Extracted protein will then be trypsin digested, desalted and finally analyzed by LC-MS/MS. Our extraction protocol for sterol-rich microdomains is optimized for the preparation of clean detergent-resistant membrane fractions from Arabidopsis thaliana cell cultures.
We use full metabolic labeling of Arabidopsis thaliana suspension cell cultures with K15NO3 as the only nitrogen source for quantitative comparative proteomic studies following biological treatment of interest 3. By mixing equal ratios of labeled and unlabeled cell cultures for joint protein extraction the influence of preparation steps on final quantitative result is kept at a minimum. Also loss of material during extraction will affect both control and treatment samples in the same way, and therefore the ratio of light and heave peptide will remain constant. In the proposed method either labeled or unlabeled cell culture undergoes a biological treatment, while the other serves as control 4.

Metabolic Labeling and Membrane Fractionation for Comparative Proteomic Analysis of Arabidopsis thaliana Suspension Cell Cultures

Here we describe a robust method for the fractionation of plant plasma membranes into detergent resistant and detergent soluble membranes based on a mixture of unlabeled and in vivo fully 15N labeled Arabidopsis thaliana cell cultures. The procedure is applied for comparative proteomic studies to understand signaling processes.

Metabólica Labeling e Membrana Fracionamento para Comparative Analysis proteômica de<em&gt; Arabidopsis thaliana</em&gt; Culturas suspensão de células

Plasma membrane microdomains are features based on the physical properties of the lipid and sterol environment and have particular roles in signaling ...

Histochemical Staining of Arabidopsis thaliana Secondary Cell Wall Elements

Arabidopsis thaliana is a model organism commonly used to understand and manipulate various cellular processes in plants, and it has been used extensively in the study of secondary cell wall formation. Secondary cell wall deposition occurs after the primary cell wall is laid down, a process carried out exclusively by specialized cells such as those forming vessel and fiber tissues. Most secondary cell walls are composed of cellulose (40&#8211;50%), hemicellulose (25&#8211;30%), and lignin (20&#8211;30%). Several mutations affecting secondary cell wall biosynthesis have been isolated, and the corresponding mutants may or may not exhibit obvious biochemical composition changes or visual phenotypes since these mutations could be masked by compensatory responses. Staining procedures have historically been used to show differences on a cellular basis. These methods are exclusively visual means of analysis; nevertheless their role in rapid and critical analysis is of great importance. Congo red and calcofluor white are stains used to detect polysaccharides, whereas M&#228;ule and phloroglucinol are commonly used to determine differences in lignin, and toluidine blue O is used to differentially stain polysaccharides and lignin. The seemingly simple techniques of sectioning, staining, and imaging can be a challenge for beginners. Starting with sample preparation using the A. thaliana model, this study details the protocols of a variety of staining methodologies that can be easily implemented for observation of cell and tissue organization in secondary cell walls of plants.

Histochemical Staining of Arabidopsis thaliana Secondary Cell Wall Elements

Plant cell wall composition varies between tissue types and can include lignin, cellulose, hemicelluloses, and pectin. Various staining techniques have been developed to visualize differences at the cell-type level. This paper is a compilation of commonly used cell wall staining techniques.

Coloração histoquímica de<em&gt; Arabidopsis thaliana</em&gt; Celular Secundária parede Elements

Arabidopsis thaliana is a model organism commonly used to understand and manipulate various cellular processes in plants, and it has been used extensively ...

Affinity-based Isolation of Tagged Nuclei from Drosophila Tissues for Gene Expression Analysis

Drosophila melanogaster embryonic and larval tissues often contain a highly heterogeneous mixture of cell types, which can complicate the analysis of gene expression in these tissues. Thus, to analyze cell-specific gene expression profiles from Drosophila tissues, it may be necessary to isolate specific cell types with high purity and at sufficient yields for downstream applications such as transcriptional profiling and chromatin immunoprecipitation. However, the irregular cellular morphology in tissues such as the central nervous system, coupled with the rare population of specific cell types in these tissues, can pose challenges for traditional methods of cell isolation such as laser microdissection and fluorescence-activated cell sorting (FACS). Here, an alternative approach to characterizing cell-specific gene expression profiles using affinity-based isolation of tagged nuclei, rather than whole cells, is described. Nuclei in the specific cell type of interest are genetically labeled with a nuclear envelope-localized EGFP tag using the Gal4/UAS binary expression system. These EGFP-tagged nuclei can be isolated using antibodies against GFP that are coupled to magnetic beads. The approach described in this protocol enables consistent isolation of nuclei from specific cell types in the Drosophila larval central nervous system at high purity and at sufficient levels for expression analysis, even when these cell types comprise less than 2% of the total cell population in the tissue. This approach can be used to isolate nuclei from a wide variety of Drosophila embryonic and larval cell types using specific Gal4 drivers, and may be useful for isolating nuclei from cell types that are not suitable for FACS or laser microdissection.

Affinity-based Isolation of Tagged Nuclei from Drosophila Tissues for Gene Expression Analysis

Drosophila tissues often contain a heterogeneous mixture of cell types.&#160;To examine gene expression in specific cell types from a particular tissue, nuclei can be genetically tagged and subsequently isolated using an affinity-based approach. Isolated nuclei can be used for downstream applications such as gene expression analysis and chromatin immunoprecipitation.

Isolamento à base de Afinidade de Tagged Núcleos de<em&gt; Drosophila</em&gt; Tecidos para Análise de Expressão Gênica

Drosophila melanogaster embryonic and larval tissues often contain a highly heterogeneous mixture of cell types, which can complicate the analysis of gene ...

Rapid Analysis of Circadian Phenotypes in Arabidopsis Protoplasts Transfected with a Luminescent Clock Reporter

The plant circadian clock allows the anticipation of daily changes to the environment. This anticipation aids the responses to temporally predictable biotic and abiotic stress. Conversely, disruption of circadian timekeeping severely compromises plant health and reduces agricultural crop yields. It is therefore imperative that we understand the intricate regulation of circadian rhythms in plants, including the factors that affect motion of the transcriptional clockwork itself.
Testing circadian defects in the model plant Arabidopsis thaliana (Arabidopsis) traditionally involves crossing specific mutant lines to a line rhythmically expressing firefly luciferase from a circadian clock gene promoter. This approach is laborious, time-consuming, and could be fruitless if a mutant has no circadian phenotype. The methodology presented here allows a rapid initial assessment of circadian phenotypes. Protoplasts derived from mutant and wild-type Arabidopsis are isolated, transfected with a rhythmically expressed luminescent reporter, and imaged under constant light conditions for 5 days. Luminescent traces will directly reveal whether the free-running period of mutant plants is different from wild-type plants. The advantage of the method is that any Arabidopsis line can efficiently be screened, without the need for generating a stably transgenic luminescent clock marker line in that mutant background.

The circadian clock regulates about a third of the Arabidopsis transcriptome, but the percentage of genes that feed back into timekeeping remains unknown. Here we visualize a method to rapidly assess circadian phenotypes in any mutant line of Arabidopsis using luminescent imaging of a circadian reporter transiently expressed in protoplasts.

Rápida análise de fenótipos circadianos em Arabidopsis Protoplastos transfectadas com um relógio Reporter luminescentes

The plant circadian clock allows the anticipation of daily changes to the environment. This anticipation aids the responses to temporally predictable ...

Analysis of Arabidopsis thaliana Growth Behavior in Different Light Qualities

Plant biologists often need to observe the growth behavior of their chosen species. To this end, the plants need constant environmental and stable light conditions, which are preferably variable in quantity and quality so that studies under different setups can be conducted. These requirements are met by climatic chambers featuring light emitting diodes (LED) lights, which can &#8211; in contrast to fluorescent lights &#8211; be set to different wavelengths. LEDs are energy conserving and emit virtually no heat even at light intensities, which often constitutes a problem with other light sources. The presented protocol provides a step-by-step guidance of how to program a climatic chamber equipped with variable LED lights as well as describing several approaches for in depth analysis of growth phenotypes. Depending on the experimental set-up various characteristics of the growing plants can be observed and analyzed. Here we describe how to determine fresh weight, leaf area, photosynthetic activity, and stomatal density. We demonstrate that in order to obtain reliable data and draw valid conclusions it is mandatory to use a sufficient number of individuals for statistical evaluation. Taking too few plants for this kind of analysis results in high statistical errors and consequently in less clear interpretations of the data.

Analysis of Arabidopsis thaliana Growth Behavior in Different Light Qualities

Here, we present a protocol for studying plant growth behavior and especially phenotypes in a reproducible manner. We show how to provide variable and at the same time stable light conditions. Proper analyses depend on sufficient sample numbers and valid statistical evaluations.

Análise do comportamento de crescimento de Arabidopsis thaliana em diferentes qualidades de luz

Plant biologists often need to observe the growth behavior of their chosen species. To this end, the plants need constant environmental and stable light ...

A Simple Method for Isolation of Soybean Protoplasts and Application to Transient Gene Expression Analyses

Soybean (Glycine max (L.) Merr.) is an important crop species and has become a legume model for the studies of genetic and biochemical pathways. Therefore, it is important to establish an efficient transient gene expression system in soybean. Here, we report a simple protocol for the preparation of soybean protoplasts and its application for transient functional analyses. We found that young unifoliate leaves from soybean seedlings resulted in large quantities of high quality protoplasts. By optimizing a PEG-calcium-mediated transformation method, we achieved high transformation efficiency using soybean unifoliate protoplasts. This system provides an efficient and versatile model for examination of complex regulatory and signaling mechanisms in live soybean cells and may help to better understand diverse cellular, developmental and physiological processes of legumes.

We developed a simple and efficient protocol for the preparation of large quantities of soybean protoplasts to study complex regulatory and signaling mechanisms in live cells.

Isolamento de Protoplastos de tecidos de 14 dias de idade, mudas de Arabidopsis thaliana

Resumo

Explore mais vídeos

Capítulos neste vídeo

Separação de células de fluorescência Activated de Protoplastos Usina

Floral-dip Transformação de Arabidopsis thaliana Examine a PTSO2:: β-glucuronidase Expressão Gênica Reporter

Arabidopsis thaliana Profiling Glycerolipid Polar por cromatografia em camada delgada (TLC) Juntamente com Cromatografia gás-líquido (GLC)

Isolamento eficiente e rápida de embriões em início de carreira a partir de

Metabólica Labeling e Membrana Fracionamento para Comparative Analysis proteômica de

Coloração histoquímica de

Isolamento à base de Afinidade de Tagged Núcleos de

Rápida análise de fenótipos circadianos em Arabidopsis Protoplastos transfectadas com um relógio Reporter luminescentes

Análise do comportamento de crescimento de Arabidopsis thaliana em diferentes qualidades de luz

Um método simples para o isolamento de aplicativo para análises de expressão de Gene transiente e protoplastas de soja