Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators
8.1K Views
•
14:42 min
•
April 25th, 2020
DOI :
April 25th, 2020
•Rozdziały w tym wideo
0:00
Introduction
1:15
Membrane Preparation- Option A: Dry Porous PTFE Sheet
1:45
Membrane Preparation- Option B: Soaked Porous PTFE Sheet
3:05
Membrane Preparation- Option C: Textile Reinforcement
5:21
Electrode Preparation- Making the Suspension
6:57
Electrode Preparation- Spray-Coating
7:58
Current Collector Attachment: Gold
10:34
Cutting And Shaping: FInal Steps Before It Is Ready
11:17
Representative Results: Gripper in Action
13:30
Representative Results: Cryo-Fracturing (Textile)
Powiązane Filmy
Fabrication of Spatially Confined Complex Oxides
9.4K Views
Fabrication and Testing of Microfluidic Optomechanical Oscillators
12.1K Views
Atomically Traceable Nanostructure Fabrication
8.6K Views
Fabrication Process of Silicone-based Dielectric Elastomer Actuators
33.4K Views
Free-form Light Actuators — Fabrication and Control of Actuation in Microscopic Scale
9.2K Views
Fabrication and Characterization of Superconducting Resonators
10.3K Views
Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method
8.2K Views
Fabrication of Soft Pneumatic Network Actuators with Oblique Chambers
8.9K Views
Scalable Stamp Printing and Fabrication of Hemiwicking Surfaces
7.2K Views
Studying Large Amplitude Oscillatory Shear Response of Soft Materials
12.4K Views
Copyright © 2025 MyJoVE Corporation. Wszelkie prawa zastrzeżone