This work was partially supported by JST CREST (Japan Science and Technology agency, Create REvolutionary technological seeds for Science and Technology innovation program), Grant Number JPMJCR1324, Japan.

1. Support preparation
<ol>
	<li>Pretreatment of support
	<ol>
		<li>Cut out a 3 cm long tubular porous &#945;-Al2O3 support (see Table of Materials).</li>
		<li>Wash the support with distilled water for 10 min. After that, wash the support with acetone for 10 min. Repeat this washing process 2x. 
		NOTE: Do not touch the outer surface of a support after the washing step. No other treatment was carried out (e.g., sonication, and rubbing by sandpaper, etc.)</li>
		<li>Dry the washed support at 110 &#176;C overnight prior to use for dip-coating. 
		NOTE: Measure the weight of the support piece after drying. The final membrane weight is calculated by the difference in the support weight before and after membrane synthesis.</li>
	</ol>
	</li>
</ol>
2. *BEA seed crystal synthesis
<ol>
	<li>Preparation of seed crystal synthesis gel
	<ol>
		<li>Add 26.2 g of colloidal silica (see Table of Materials) and 8.39 g of tetraethylammonium hydroxide (TEAOH) (see Table of Materials) into a 250 mL bottle made of polypropylene (Solution A). Stir the mixture using a magnetic stirrer for 20 min in a 50 &#176;C in water bath. After that, stir the mixture using a magnetic stirrer for 20 min at room temperature.</li>
		<li>Add 8.39 g of TEAOH, 5.79 g of distilled water, 1.08 g of NaOH (see Table of Materials), and 0.186 g of NaAlO2 (see Table of Materials) into a Teflon beaker (Solution B). Stir the mixture by using a magnetic stirrer for 20 min at room temperature.</li>
		<li>Add solution B to solution A in the 250 mL bottle. The mixture of solution A and B will become milky. Cap the bottle and shake it vigorously by hand for 5 min. After that, stir the mixture using a magnetic stirrer for 24 h at room temperature. The gel obtained after 24 h of stirring is called the synthesis gel. 
		NOTE: The milky solution cannot be mixed with a magnetic stirrer at first because it forms a hard gel. The 5 min shaking by hand makes the milky solution soft and allows stirring with a magnetic stirrer. The final composition of the synthesis gel is 24Na2O: 1Al2O3: 200SiO2: 60TEAOH: 2905H2O.</li>
	</ol>
	</li>
	<li>Crystallization
	<ol>
		<li>Pour the synthesis gel into a Teflon-lined autoclave. Place the autoclave in an air oven at 100 &#176;C for 7 days.</li>
	</ol>
	</li>
	<li>Quenching
	<ol>
		<li>Quench the autoclave with flowing water for 30 min after crystallization.</li>
	</ol>
	</li>
	<li>Filtration
	<ol>
		<li>Remove the white sediment in the autoclave by filtration. Wash the white sediment with 200 mL of boiling water to remove amorphous and uncrystallized materials. Dry the washed sediment at 110 &#176;C overnight. The dried sediment is the seed crystal. 
		NOTE: A 200 nm mesh filter (see Table of Materials) was used to obtain the crystal. The Si/Al ratio of obtained crystal was ~19 as analyzed by energy dispersive X-ray spectrometry (EDX). About 2.3 g of seed crystal was obtained by a single synthesis. The preparation procedure refers to a previous report by Schoeman et al. with some modifications14.</li>
	</ol>
	</li>
	<li>*BEA seed slurry preparation for dip-coating
	<ol>
		<li>Add 0.50 g of seed crystals into 100 mL of distilled water to prepare a 5 g/L seed slurry. Carry out sonication of the seed slurry for 1 h to disperse the seed crystals.</li>
	</ol>
	</li>
</ol>
3. Seeding on support by dip-coating
<ol>
	<li>Set up a support for the dip-coating equipment.
	<ol>
		<li>Fix a tubular support with a stainless steel rod using Teflon tape to plug the inside of the support.</li>
	</ol>
	</li>
	<li>Dip-coating
	<ol>
		<li>Pour the seed slurry into a glass tube with a 19 mm diameter. Immerse the fixed support into the poured seed slurry and wait for 1 min. After that, withdraw the seed slurry vertically at ~3 cm/s. Dry the support at 70 &#176;C for 2 h after dip-coating. 
		NOTE: The dip-coating process shown in 3.2.1 was run 2x. This protocol uses homemade equipment for dip-coating. One side of glass tube is plugged with a silicon cap with a tap from which the seed slurry can be withdrawn. The details about the dip-coating equipment are provided in the video.</li>
	</ol>
	</li>
	<li>3. Calcination
	<ol>
		<li>Calcine the dip-coated support at 530 &#176;C for 6 h. 
		NOTE: The calcination step was carried out to remove OSDA blocking the micropores of the seed crystals and to chemically bind the seeds onto the support surface. The increase and decrease temperature rates of the calcination step were 50 &#176;C/min.</li>
	</ol>
	</li>
	<li>Measuring the weight of the seed crystal on the support
	<ol>
		<li>After calcination, measure the weight of the support. The amount of seed crystal loaded is calculated by the difference in the support weight before and after dip-coating. 
		NOTE: The average weight of seeded crystal loaded on a support is ~17 mg.</li>
	</ol>
	</li>
</ol>
4. *BEA membrane preparation by a secondary growth method
<ol>
	<li>Preparation for gel synthesis
	<ol>
		<li>Add 92.9 g of distilled water, 9.39 g of NaOH, and 1.15 g of NaAl2O into a 250 mL polypropylene bottle. Stir the mixture using a magnetic stirrer for 30 min at 60 &#176;C in a water bath. After that, add 81.6 g of colloidal silica in a stepwise manner into the mixture. Stir the mixture by using a magnetic stirrer for 4 h at 60 &#176;C in a water bath. The gel that is obtained after stirring for 4 h is called the synthesis gel. 
		NOTE: Colloidal silica was slowly added at the rate of one drop (~0.05 g) per second. The final composition of the synthesis gel is 30Na2O: 1Al2O3: 100SiO2: 2000H2O. The preparation procedure of the synthesis gel is based on Kamimura et al. with some modifications9.</li>
	</ol>
	</li>
	<li>Crystallization
	<ol>
		<li>Pour the synthesis gel into a Teflon lined autoclave in which the seeded support is placed vertically. The autoclave is placed in an air oven at 120 &#176;C for 7 days.</li>
	</ol>
	</li>
	<li>Quenching
	<ol>
		<li>Quench the autoclave with flowing water for 30 min after crystallization.</li>
	</ol>
	</li>
	<li>Washing and drying
	<ol>
		<li>Wash the membrane in boiling water for 8 h and dry overnight. This is the *BEA membrane.</li>
	</ol>
	</li>
	<li>Measuring the weight of the membrane
	<ol>
		<li>After drying, measure the weight of the prepared membrane. The weight of the membrane is calculated by the difference in support weight before and after crystallization. 
		NOTE: The average weight of the *BEA membrane on each support is ~74 mg.</li>
	</ol>
	</li>
</ol>

<ol>
	<li>Ghaffour, N., Missimer, T. M., Amy, G. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Technical+review+and+evaluation+of+the+economics+of+water+desalination:+Current+and+future+challenges+for+better+water+supply+sustainability.">Technical review and evaluation of the economics of water desalination: Current and future challenges for better water supply sustainability.</a> Desalination. 309, 197-207 (2013).</li><li>Hickenbottom, K. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Forward+osmosis+treatment+of+drilling+mud+and+fracturing+wastewater+from+oil+and+gas+operations.">Forward osmosis treatment of drilling mud and fracturing wastewater from oil and gas operations.</a> Desalination. 312, 60-66 (2013).</li><li>Kanezashi, M., Shazwani, W. N., Yoshioka, T., Tsuru, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Separation+of+propylene/propane+binary+mixtures+by+bis(triethoxysilyl)+methane+(BTESM)-derived+silica+membranes+fabricated+at+different+calcination+temperatures.">Separation of propylene/propane binary mixtures by bis(triethoxysilyl) methane (BTESM)-derived silica membranes fabricated at different calcination temperatures.</a> Journal of Membrane Science. 415-416, 478-485 (2012).</li><li>Xu, L., Rungta, M., Koros, W. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Matrimid&#174;+derived+carbon+molecular+sieve+hollow+fiber+membranes+for+ethylene/ethane+separation.">Matrimid&#174; derived carbon molecular sieve hollow fiber membranes for ethylene/ethane separation.</a> Journal of Membrane Science. 380, 138-147 (2011).</li><li>Morigami, Y., Kondo, M., Abe, J., Kita, H., Okamoto, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+first+large-scale+pervaporation+plant+using+tubular-type+module+with+zeolite+NaA+membrane.">The first large-scale pervaporation plant using tubular-type module with zeolite NaA membrane.</a> Separation and Purification Technology. 25, 251-260 (2001).</li><li>Kondo, M., Komori, M., Kita, H., Okamoto, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tubular-type+pervaporation+module+with+zeolite+NaA+membrane.">Tubular-type pervaporation module with zeolite NaA membrane.</a> Journal of Membrane Science. 133, 133-141 (1997).</li><li>Hoof, V. V., Dotremont, C., Buekenhoudt, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Performance+of+Mitsui+NaA+type+zeolite+membranes+for+the+dehydration+of+organic+solvents+in+comparison+with+commercial+polymeric+pervaporation+membranes.">Performance of Mitsui NaA type zeolite membranes for the dehydration of organic solvents in comparison with commercial polymeric pervaporation membranes.</a> Separation and Purification Technology. 48, 304-309 (2006).</li><li>Kamimura, Y., Chaikittisilp, W., Itabashi, K., Shimojima, A., Okubo, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Critical+Factors+in+the+Seed-Assisted+Synthesis+of+Zeolite+Beta+and+"Green+Beta"+from+OSDA-Free+Na+-Aluminosilicate+Gels.">Critical Factors in the Seed-Assisted Synthesis of Zeolite Beta and "Green Beta" from OSDA-Free Na+-Aluminosilicate Gels.</a> Chemistry An Asian Journal. 5, 2182-2191 (2010).</li><li>Majano, G., Delmotte, L., Valtchev, V., Mintova, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Al-Rich+Zeolite+Beta+by+Seeding+in+the+Absence+of+Organic+Template.">Al-Rich Zeolite Beta by Seeding in the Absence of Organic Template.</a> Chemistry of Materials. 21, 4184-4191 (2009).</li><li>Sakai, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Formation+process+of+*BEA-type+zeolite+membrane+under+OSDA-free+conditions+and+its+separation+property.">Formation process of *BEA-type zeolite membrane under OSDA-free conditions and its separation property.</a> Microporous and Mesoporous Materials. 284, 360-365 (2019).</li><li>Choi, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Grain+Boundary+Defect+Elimination+in+a+Zeolite+Membrane+by+Rapid+Thermal+Processing.">Grain Boundary Defect Elimination in a Zeolite Membrane by Rapid Thermal Processing.</a> Science. 325, 590-593 (2009).</li><li>Dong, J., Lin, Y. S., Hu, M. Z. -. C., Peascoe, R. A., Payzant, E. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Template-removal-associated+microstructural+development+of+porous-ceramic-supported+MFI+zeolite+membranes.">Template-removal-associated microstructural development of porous-ceramic-supported MFI zeolite membranes.</a> Microporous and Mesoporous Materials. 34, 241-253 (2000).</li><li>Schoeman, B. J., Babouchkina, E., Mintova, S., Valtchev, V. P., Sterte, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Synthesis+of+Discrete+Colloidal+Crystals+of+Zeolite+Beta+and+their+Application+in+the+Preparation+of+Thin+Microporous+Films.">The Synthesis of Discrete Colloidal Crystals of Zeolite Beta and their Application in the Preparation of Thin Microporous Films.</a> Journal of Porous Materials. 8, 13-22 (2001).</li><li>Sasaki, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polytype+distributions+in+low-defect+zeolite+beta+crystals+synthesized+without+an+organic+structure-directing+agent.">Polytype distributions in low-defect zeolite beta crystals synthesized without an organic structure-directing agent.</a> Microporous and Mesoporous Materials. 225, 210-215 (2016).</li></ol>

The authors have nothing to disclose.

There are many kinds of Si and Al sources for zeolite synthesis. However, we cannot change raw materials for preparation of this *BEA-type membrane. If raw materials are changed, the phase of zeolite crystallized and/or growth rate may be changed.
Glass beakers cannot be used for synthesis gel preparation because the synthesis gel has high alkalinity. Bottles and beakers made of polyethylene, polypropylene, and Teflon can be used instead.
To prepare a higher quality *BEA membrane, uniform seed layer on the outer surface of tubular support is essential. The size of the seed crystals and their distribution are quite important to form a uniform seed layer by dip-coating. The required seed size is larger than that of the pore size of the support (150 nm) to stop the seed crystal from spreading into the support. In addition, a narrow distribution of the seed size is also required to prepare a uniform seed layer.
Crystallization conditions for membrane preparation such as temperatures and time periods are quite important. Changing the crystallization conditions easily shifts the phase of zeolite crystalized. Higher temperatures and longer time periods lead to crystallization of the MOR-type zeolite. If the MOR-type zeolite co-crystallizes in the *BEA membrane, large spherical crystal can be observed on the surface by microscopic observation.
Successfully synthesized *BEA membrane has very few defects and can be used for hydrocarbon separation11.

Membrane separation has drawn attention as novel-energy saving separation process. Many types of membranes have been developed for the past decades. Polymeric membranes have been widely used for gas separation, creating drinkable water from sea water1, and wastewater treatment2.
Inorganic membrane materials like silica3, carbon molecular sieve4, and zeolite have advantages for thermal, chemical, and mechanical strength compared with polymeric membranes. Therefore, inorganic membranes tend to be used under more severe conditions, such as hydrocarbon separation in petroleum and petrochemical fields.
Zeolite has unique adsorption and molecular sieving properties due to its micropores. In addition, zeolite has a cation exchange ability that contributes to control zeolite&#39;s adsorption and molecular sieving properties. The number of cations in zeolite is determined by the Si/Al ratio of the zeolite structure. Therefore, the size of the micropores and Si/Al ratio are key characteristics that determine the permeation and separation properties of zeolite membranes. For these reasons, zeolite is a promising type of inorganic membrane material. Some zeolite membranes have already been commercialized for dehydration of organic solvents due to their hydrophilicity and molecular sieving properties5,6,7,8.
*BEA-type zeolite is an interesting membrane material because of its large pore size and wide Si/Al range. *BEA has generally been prepared by hydrothermal treatment using tetraethylammonium hydroxide as organic structure-directing agent (OSDA). However, the synthesis method using OSDA has economic and environmental disadvantages. Recently, a seed-assisted method for *BEA synthesis without using OSDA was reported9,10.
*BEA is an intergrowth crystal of polymorph A and polymorph B. Thereby, &#34;*&#34; represents an intergrowth material. At present, no bulk materials consisting only of polymorph A or B is known.
We have successfully prepared *BEA membranes without using OSDA by a modified seed-assisted method11. The *BEA membrane had very few defects and exhibited high separation performance for hydrocarbons due to its molecular sieving effect. It is well known that calcination to remove OSDA after synthesis is one of the most common causes of defect formation in zeolite membranes12,13. Our *BEA membrane prepared without using OSDA showed good separation performance possibly because this calcination step was skipped.
The preparation of zeolite membranes is based on know-how and experience accumulated in the laboratory. Consequently, it is difficult for a beginner to synthesize zeolite membranes alone. Here, we would like to share a protocol for *BEA membrane preparation as a reference for everyone who wants to start membrane synthesis.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>a-Al2O3 support</td>
			<td>Noritake Co. Ltd.</td>
			<td>NS-1</td>
			<td>Average pore size, 150 nm; Outer diameter, 10 mm; Innar diameter, 7 mm</td>
		</tr>
		<tr>
			<td>Colloidal silica</td>
			<td>Nissan Chemical</td>
			<td>ST-S</td>
			<td>SiO2 30.5%, Na2O 0.44%, H2O 69.1%</td>
		</tr>
		<tr>
			<td>Mesh filter (PTFE membrane)</td>
			<td>Omnipore</td>
			<td>JGWP04700</td>
			<td>Pore size, 200 nm</td>
		</tr>
		<tr>
			<td>NaAl2O</td>
			<td>Kanto Chemical</td>
			<td>34095-01</td>
			<td>Na2O 31.0-35.0%; Al2O3 34.0-39.0%</td>
		</tr>
		<tr>
			<td>NaOH</td>
			<td>Kanto Chemical</td>
			<td>37184-00</td>
			<td>97%</td>
		</tr>
		<tr>
			<td>Tetraethylammonium hydroxide</td>
			<td>Sigma-Aldrich</td>
			<td>302929-500ML</td>
			<td>35 wt% solution</td>
		</tr>
	</tbody>
</table>

organic structure-directing agent-free synthesis for *bea-type zeolite membrane

Membrane separation has drawn attention as a novel-energy saving separation process. Zeolite membranes have great potential for hydrocarbon separation in petroleum and petrochemical fields because of their high thermal, chemical, and mechanical strength. A *BEA-type zeolite is an interesting membrane material because of its large pore size and wide Si/Al range. This manuscript presents a protocol for *BEA membrane preparation by a secondary growth method that does not use an organic structure-directing agent (OSDA). The preparation protocol consists of four steps: pretreatment of support, seed preparation, dip-coating, and membrane crystallization. First, the *BEA seed crystal is prepared by conventional hydrothermal synthesis using OSDA. The synthesized seed crystal is loaded on the outer surface of a 3 cm long tubular &#945;-Al2O3 support by a dip-coating method. The loaded seed layer is prepared with the secondary growth method using a hydrothermal treatment at 393 K for 7 days without using OSDA. A *BEA membrane having very few defects is successfully obtained. The seed preparation and dip-coating steps strongly affect the membrane quality.

Figure 1 shows the preparation procedure of the *BEA seed crystal. Figure 2 shows the X-ray diffraction (XRD) pattern of synthesized *BEA seed crystal. Typical strong reflection peaks of (101) and (302) around 2q = 7.7 and 22.1&#176; appeared. In addition, no obvious reflection peaks other than the *BEA-type zeolite were observed. These results showed that the pure phase of *BEA zeolite was successfully synthesized.
A typical FE-SEM image of the synthesized seed crystal is shown in Figure 3. Spherical seed crystals were observed and their size was uniformly ~200 nm. The Si/Al ratio of the obtained crystals was ~19 when analyzed by EDX.
Figure 4 and Figure 5 show the procedures of dip-coating and membrane preparation, respectively. Figure 6 shows the XRD pattern of synthesized *BEA membrane. As in the case of the seed crystals, typical strong reflection peaks of (101) and (302) around 2q = 7.7 and 22.1&#176; appeared. In addition, reflection peaks of &#945;-Al2O3 as support around 2q = 26, 35.5, and 38&#176; were observed. As a result, we were able to confirm that the pure phase of *BEA was obtained as a membrane.
A typical field emission scanning electron microscope (FE-SEM) image of the synthesized membrane is shown in Figure 7. Crystals having truncated octahedral morphology uniformly covered the support surface. The distinct morphology seems to be very similar to typical *BEA crystals synthesized by the OSDA-free method previously reported9,10,15. The Si/Al ratio of the obtained membrane was ~5.1 analyzed by EDX.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/60500/60500fig1a.jpg" /> 
Figure 1: Preparation procedure of *BEA seed crystal. *BEA seed crystal was synthesized by typical hydrothermal treatment using OSDA. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/60500/60500fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/60500/60500fig2a.jpg" /> 
Figure 2: XRD pattern of *BEA seed crystals. The crystal phase of the sediment obtained was confirmed with the XRD pattern. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/60500/60500fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 3" class="xfigimg" src="/files/ftp_upload/60500/60500fig3a.jpg" /> 
Figure 3: Typical FE-SEM image of seed crystals. Microscopic analysis was carried out to estimate the size of the seed crystals. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/60500/60500fig3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 4" class="xfigimg" src="/files/ftp_upload/60500/60500fig4a.jpg" /> 
Figure 4: Dip-coating procedure. Seed crystals were loaded by the dip-coating method using the seed slurry. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/60500/60500fig4large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 5" class="xfigimg" src="/files/ftp_upload/60500/60500fig5a.jpg" /> 
Figure 5: Preparation procedure of the *BEA membrane. The *BEA membrane was synthesized by the secondary growth method without using OSDA. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/60500/60500fig5large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 6" class="xfigimg" src="/files/ftp_upload/60500/60500fig6a.jpg" /> 
Figure 6: XRD pattern of the *BEA membrane. The crystal phase of the membrane obtained was confirmed from the XRD pattern. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/60500/60500fig6large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 7" class="xfigimg" src="/files/ftp_upload/60500/60500fig7a.jpg" /> 
Figure 7: Typical FE-SEM image of the *BEA membrane. Microscopic analysis was carried out to investigate the membrane thickness and crystal morphology. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/60500/60500fig7large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>

Watch this Scientific Journal Video about Organic Structure-directing Agent-free Synthesis for *BEA-type Zeolite Membrane at JoVE.com

Organic Structure-directing Agent-free Synthesis for *BEA-type Zeolite Membrane

A *BEA seed crystal was loaded on a porous &#945;-Al2O3 support by the dip-coating method, and hydrothermally grown without using an organic structure-directing agent. A *BEA-type zeolite membrane having very few defects was successfully prepared by the secondary growth method.

Membrane separation has drawn attention as a novel-energy saving separation process. Zeolite membranes have great potential for hydrocarbon separation in ...

organic-structure-directing-agent-free-synthesis-for-bea-type-zeolite

Nanyang Technological University

Research

JoVE Journal

Chemistry

14.1K Views.  Waseda University. A *BEA seed crystal was loaded on a porous α-Al2O3 support by the dip-coating method, and hydrothermally grown without using an organic structure-directing agent. A *BEA-type zeolite membrane having very few defects was successfully prepared by the secondary growth method.

Video: Organic Structure-directing Agent-free Synthesis for *BEA-type Zeolite Membrane

Synthesis, Cellular Delivery and In vivo Application of Dendrimer-based pH Sensors

The development of fluorescent indicators represented a revolution for life sciences. Genetically encoded and synthetic fluorophores with sensing abilities allowed the visualization of biologically relevant species with high spatial and temporal resolution. Synthetic dyes are of particular interest thanks to their high tunability and the wide range of measureable analytes. However, these molecules suffer several limitations related to small molecule behavior (poor solubility, difficulties in targeting, often no ratiometric imaging allowed). In this work we introduce the development of dendrimer-based sensors and present a procedure for pH measurement in vitro, in living cells and in vivo. We choose dendrimers as ideal platform for our sensors for their many desirable properties (monodispersity, tunable properties, multivalency) that made them a widely used scaffold for several biomedical devices. The conjugation of fluorescent pH indicators to the dendrimer scaffold led to an enhancement of their sensing performances. In particular dendrimers exhibit reduced cell leakage, improved intracellular targeting and allow ratiometric measurements. These novel sensors were successfully employed to measure pH in living HeLa cells and in vivo in mouse brain.

Synthesis, Cellular Delivery and In vivo Application of Dendrimer-based pH Sensors

Fluorescence sensors are powerful tools in life science. Here we describe a methodology to synthesize and use dendrimer-based fluorescent sensors to measure pH in living cells and in vivo. The dendritic scaffold enhances the properties of conjugated fluorescent dyes leading to improved sensing properties.

The development of  fluorescent indicators represented a revolution for life sciences. Genetically  encoded and synthetic fluorophores with sensing ...

Analysis of Volatile and Oxidation Sensitive Compounds Using a Cold Inlet System and Electron Impact Mass Spectrometry

This video presents a protocol for the mass spectrometrical analysis of volatile and oxidation sensitive compounds using electron impact ionization. The analysis of volatile and oxidation sensitive compounds by mass spectrometry is not easily achieved, as all state-of-the-art mass spectrometric methods require at least one sample preparation step, e.g., dissolution and dilution of the analyte (electrospray ionization), co-crystallization of the analyte with a matrix compound (matrix-assisted laser desorption/ionization), or transfer of the prepared samples into the ionization source of the mass spectrometer, to be conducted under atmospheric conditions. Here, the use of a sample inlet system is described which enables the analysis of volatile metal organyls, silanes, and phosphanes using a sector field mass spectrometer equipped with an electron impact ionization source. All sample preparation steps and the sample introduction into the ion source of the mass spectrometer take place either under air-free conditions or under vacuum, enabling the analysis of compounds highly susceptible to oxidation. The presented technique is especially of interest for inorganic chemists, working with metal organyls, silanes, or phosphanes, which have to be handled using inert conditions, such as the Schlenk technique. The principle of operation is presented in this video.

This video presents a protocol for the mass spectrometrical analysis of volatile and oxidation sensitive compounds using electron impact ionization. The presented technique is especially of interest for inorganic chemists, working with metal organyls, silanes, or phosphanes which have to be handled using inert conditions, such as the Schlenk technique.

This video presents a protocol for the mass spectrometrical analysis of volatile and oxidation sensitive compounds using electron impact ionization. The ...

Synthesis and Characterization of Functionalized Metal-organic Frameworks

Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and technological applications. Their signature property is their ultrahigh porosity, which however imparts a series of challenges when it comes to both constructing them and working with them. Securing desired MOF chemical and physical functionality by linker/node assembly into a highly porous framework of choice can pose difficulties, as less porous and more thermodynamically stable congeners (e.g., other crystalline polymorphs, catenated analogues) are often preferentially obtained by conventional synthesis methods. Once the desired product is obtained, its characterization often requires specialized techniques that address complications potentially arising from, for example, guest-molecule loss or preferential orientation of microcrystallites. Finally, accessing the large voids inside the MOFs for use in applications that involve gases can be problematic, as frameworks may be subject to collapse during removal of solvent molecules (remnants of solvothermal synthesis). In this paper, we describe synthesis and characterization methods routinely utilized in our lab either to solve or circumvent these issues. The methods include solvent-assisted linker exchange, powder X-ray diffraction in capillaries, and materials activation (cavity evacuation) by supercritical CO2 drying. Finally, we provide a protocol for determining a suitable pressure region for applying the Brunauer-Emmett-Teller analysis to nitrogen isotherms, so as to estimate surface area of MOFs with good accuracy.

Synthesis, activation, and characterization of intentionally designed metal-organic framework materials is challenging, especially when building blocks are incompatible or unwanted polymorphs are thermodynamically favored over desired forms. We describe how applications of solvent-assisted linker exchange, powder X-ray diffraction in capillaries and activation via supercritical CO2 drying, can address some of these challenges.

Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and ...

Synthesis and Characterization of Supramolecular Colloids

Control over colloidal assembly is of utmost importance for the development of functional colloidal materials with tailored structural and mechanical properties for applications in photonics, drug delivery and coating technology. Here we present a new family of colloidal building blocks, coined supramolecular colloids, whose self-assembly is controlled through surface-functionalization with a benzene-1,3,5-tricarboxamide (BTA) derived supramolecular moiety. Such BTAs interact via directional, strong, yet reversible hydrogen-bonds with other identical BTAs. Herein, a protocol is presented that describes how to couple these BTAs to colloids and how to quantify the number of coupling sites, which determines the multivalency of the supramolecular colloids. Light scattering measurements show that the refractive index of the colloids is almost matched with that of the solvent, which strongly reduces the van der Waals forces between the colloids. Before photo-activation, the colloids remain well dispersed, as the BTAs are equipped with a photo-labile group that blocks the formation of hydrogen-bonds. Controlled deprotection with UV-light activates the short-range hydrogen-bonds between the BTAs, which triggers the colloidal self-assembly. The evolution from the dispersed state to the clustered state is monitored by confocal microscopy. These results are further quantified by image analysis with simple routines using ImageJ and Matlab. This merger of supramolecular chemistry and colloidal science offers a direct route towards light- and thermo-responsive colloidal assembly encoded in the surface-grafted monolayer.

A protocol for the synthesis and characterization of colloids coated with supramolecular moieties is described. These supramolecular colloids undergo self-assembly upon the activation of the hydrogen-bonds between the surface-anchored molecules by UV-light.

Control over colloidal assembly is of utmost importance for the development of functional colloidal materials with tailored structural and mechanical ...

Synthesis of Cyclic Polymers and Characterization of Their Diffusive Motion in the Melt State at the Single Molecule Level

We demonstrate a method for the synthesis of cyclic polymers and a protocol for characterizing their diffusive motion in a melt state at the single molecule level. An electrostatic self-assembly and covalent fixation (ESA-CF) process is used for the synthesis of the cyclic poly(tetrahydrofuran) (poly(THF)). The diffusive motion of individual cyclic polymer chains in a melt state is visualized using single molecule fluorescence imaging by incorporating a fluorophore unit in the cyclic chains. The diffusive motion of the chains is quantitatively characterized by means of a combination of mean-squared displacement (MSD) analysis and a cumulative distribution function (CDF) analysis. The cyclic polymer exhibits multiple-mode diffusion which is distinct from its linear counterpart. The results demonstrate that the diffusional heterogeneity of polymers that is often hidden behind ensemble averaging can be revealed by the efficient synthesis of the cyclic polymers using the ESA-CF process and the quantitative analysis of the diffusive motion at the single molecule level using the MSD and CDF analyses.

A protocol for the synthesis and characterization of diffusive motion of cyclic polymers at the single molecule level is presented.

We demonstrate a method for the synthesis of cyclic polymers and a protocol for characterizing their diffusive motion in a melt state at the single ...

Synthesis of a Water-soluble Metal&#8211;Organic Complex Array

We demonstrate a method for the synthesis of a water-soluble multimetallic peptidic array containing a predetermined sequence of metal centers such as Ru(II), Pt(II), and Rh(III). The compound, named as a water-soluble metal-organic complex array (WSMOCA), is obtained through 1) the conventional solution-chemistry-based preparation of the corresponding metal complex monomers having a 9-fluorenylmethyloxycarbonyl (Fmoc)-protected amino acid moiety and 2) their sequential coupling together with other water-soluble organic building units on the surface-functionalized polymeric resin by following the procedures originally developed for the solid-phase synthesis of polypeptides, with proper modifications. Traces of reactions determined by mass spectrometric analysis at the representative coupling steps in stage 2 confirm the selective construction of a predetermined sequence of metal centers along with the peptide backbone. The WSMOCA cleaved from the resin at the end of stage 2 has a certain level of solubility in aqueous media dependent on the pH value and/or salt content, which is useful for the purification of the compound.

A potential general method for the synthesis of water-soluble multimetallic peptidic arrays containing a predetermined sequence of metal centers is presented.

We demonstrate a method for the synthesis of a water-soluble multimetallic peptidic array containing a predetermined sequence of metal centers such as ...

Microfluidic-based Synthesis of Covalent Organic Frameworks (COFs): A Tool for Continuous Production of COF Fibers and Direct Printing on a Surface

Covalent Organic Frameworks (COFs) are a class of porous covalent materials which are frequently synthesized as unprocessable crystalline powders. The first COF was reported in 2005 with much effort centered on the establishment of new synthetic routes for its preparation. To date, most available synthetic methods for COF synthesis are based on bulk mixing under solvothermal conditions. Therefore, there is increasing interest in developing systematic protocols for COF synthesis that provide for fine control over reaction conditions and improve COF processability on surfaces, which is essential for their use in practical applications. Herein, we present a novel microfluidic-based method for COF synthesis where the reaction between two constituent building blocks, 1,3,5-benzenetricarbaldehyde (BTCA) and 1,3,5-tris(4-aminophenyl)benzene (TAPB), takes place under controlled diffusion conditions and at room temperature. Using such an approach yields sponge-like, crystalline fibers of a COF material, hereafter called MF-COF. The mechanical properties of MF-COF and the dynamic nature of the approach allow the continuous production of MF-COF fibers and their direct printing onto surfaces. The general method opens new potential applications requiring advanced printing of 2D or 3D COF structures on flexible or rigid surfaces.

Microfluidic-based Synthesis of Covalent Organic Frameworks COFs: A Tool for Continuous Production of COF Fibers and Direct Printing on a Surface

We present a novel microfluidic-based method for synthesis of covalent organic frameworks (COFs). We demonstrate how this approach can be used to produce continuous COF fibers, and also 2D or 3D COF structures on surfaces.

Covalent Organic Frameworks (COFs) are a class of porous covalent materials which are frequently synthesized as unprocessable crystalline powders. The ...

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides Mediated by Ni/Zn Complexes

Here, we describe an effective protocol that combines photoredox Ni/Ir catalysis with the use of a Zn-alkoxide for efficient ring-opening polymerization, allowing for the synthesis of isotactic poly(&#945;-hydroxy acids) with expected molecular weights (&#62;140 kDa) and narrow molecular weight distributions (Mw/Mn &#60; 1.1). This ring-opening polymerization is mediated by Ni and Zn complexes in the presence of an alcohol initiator and a photoredox Ir catalyst, irradiated by a blue LED (400 - 500 nm). The polymerization is performed at a low temperature (-15 &#176;C) to avoid undesired side reactions. The complete monomer consumption can be achieved within 4 - 8 hours, providing a polymer close to the expected molecular weight with narrow molecular weight distribution. The resulted number-average molecular weight shows a linear correlation with the degree of polymerization up to 1000. The homodecoupling 1H NMR study confirms that the obtained polymer is isotactic without epimerization. This polymerization reported herein offers a strategy for achieving rapid, controlled O-carboxyanhydrides polymerization to prepare stereoregular poly(&#945;-hydroxy acids) and its copolymers bearing various functional side-chain groups.

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides Mediated by Ni/Zn Complexes

A protocol for the controlled photoredox ring-opening polymerization of O-carboxyanhydrides mediated by Ni/Zn complexes is presented.

Here, we describe an effective protocol that combines photoredox Ni/Ir catalysis with the use of a Zn-alkoxide for efficient ring-opening polymerization, ...

Efficient Synthesis of Polyfunctionalized Benzenes in Water via Persulfate-promoted Benzannulation of &#945;,&#946;-Unsaturated Compounds and Alkynes

Benzannulation reactions represent an effective protocol to transform acyclic building blocks into structurally varied benzene skeletons. Despite classical and recent approaches toward functionalized benzenes, in water metal-free methods remains a challenge and represents an opportunity to expand even more the set of tools used to synthesize polysubstituted benzene compounds. This protocol describes an operationally simple experimental setup to explore the benzannulation of &#945;,&#946;-unsaturated compounds and alkynes to afford unprecedented functionalized benzene rings in high yields. Ammonium persulfate is the reagent of choice and brings notable advantages as stability and easy handling. Moreover, the use of water as a solvent and the absence of metals impart more sustainability to the method. A modified workup procedure that avoids the use of drying agents also adds convenience to the protocol. The purification of the products is performed using only a plug of silica. The substrate scope is currently limited to terminal alkynes and &#945;,&#946;-unsaturated aliphatic compounds.

Efficient Synthesis of Polyfunctionalized Benzenes in Water via Persulfate-promoted Benzannulation of &#945;,&#946;-Unsaturated Compounds and Alkynes

A persulfate-promoted metal-free benzannulation of &#945;,&#946;-unsaturated compounds and alkynes in water toward the synthesis of unprecedented polyfunctionalized benzenes is reported.

Benzannulation reactions represent an effective protocol to transform acyclic building blocks into structurally varied benzene skeletons. Despite ...

Construction of Cyclic Cell-Penetrating Peptides for Enhanced Penetration of Biological Barriers

Cancer has been a grand challenge in global health. However, the complex tumor microenvironment generally limits the access of therapeutics to deeper tumor cells, leading to tumor recurrence. To conquer the limited penetration of biological barriers, cell-penetrating peptides (CPPs) have been discovered with excellent membrane translocation ability and have emerged as useful molecular transporters for delivering various cargoes into cells. However, conventional linear CPPs generally show compromised proteolytic stability, which limits their permeability across biological barriers. Thus, the development of novel molecular transporters that can penetrate biological barriers and exhibit enhanced proteolytic stability is highly desired to promote drug delivery efficiency in biomedical applications. We have previously synthesized a panel of short cyclic CPPs with aromatic crosslinks, which exhibited superior permeability in cancer cells and tissues compared to their linear counterparts. Here, a concise protocol is described for the synthesis of the fluorescently labeled cyclic polyarginine R8 peptide and its linear counterpart, as well as key steps for investigating their cell permeability.

This protocol describes the synthesis of cyclic cell-penetrating peptides with aromatic cross-links and the evaluation of their permeability across biological barriers.

Cancer has been a grand challenge in global health. However, the complex tumor microenvironment generally limits the access of therapeutics to deeper ...

Organic Structure-directing Agent-free Synthesis for *BEA-type Zeolite Membrane

Podsumowanie

Przeglądaj więcej filmów

Rozdziały w tym wideo

Synthesis, Cellular Delivery and In vivo Application of Dendrimer-based pH Sensors

Analysis of Volatile and Oxidation Sensitive Compounds Using a Cold Inlet System and Electron Impact Mass Spectrometry

Synthesis and Characterization of Functionalized Metal-organic Frameworks

Synthesis and Characterization of Supramolecular Colloids

Synthesis of Cyclic Polymers and Characterization of Their Diffusive Motion in the Melt State at the Single Molecule Level

Synthesis of a Water-soluble Metal–Organic Complex Array

Microfluidic-based Synthesis of Covalent Organic Frameworks (COFs): A Tool for Continuous Production of COF Fibers and Direct Printing on a Surface

Controlled Photoredox Ring-Opening Polymerization of O-Carboxyanhydrides Mediated by Ni/Zn Complexes

Efficient Synthesis of Polyfunctionalized Benzenes in Water via Persulfate-promoted Benzannulation of α,β-Unsaturated Compounds and Alkynes

Construction of Cyclic Cell-Penetrating Peptides for Enhanced Penetration of Biological Barriers