JoVE Journal
Engineering
Masz pełny dostęp do tej treści za pośrednictwem
Nanyang Technological UniversityMethods for Measuring the Orientation and Rotation Rate of 3D-printed Particles in Turbulence
10.0K Views
•
12:34 min
•
June 24th, 2016
DOI :
June 24th, 2016
•Rozdziały w tym wideo
0:05
Title
0:58
Design and Fabrication of Particles
2:53
Preparation of Particles
5:26
Experiment and Optical Setup
7:28
Perform the Experiment
8:46
Data Analysis
10:13
Results: Reconstructed Trajectories and Tumbling Rates for Crosses and Jacks
11:25
Conclusion
Powiązane Filmy
Encapsulation and Permeability Characteristics of Plasma Polymerized Hollow Particles
10.7K Views
Experimental Measurement of Settling Velocity of Spherical Particles in Unconfined and Confined Surfactant-based Shear Thinning Viscoelastic Fluids
13.2K Views
Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
11.3K Views
Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow
12.1K Views
Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions
8.6K Views
Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques
7.0K Views
3D Printing - Evaluating Particle Emissions of a 3D Printing Pen
8.4K Views
Frugal Imaging Technique of Capillary Flow Through Three-Dimensional Polymeric Printing Powders
1.2K Views
Real-Time Imaging of Bonding in 3D-Printed Layers
3.1K Views
Measuring Turbulent Flows
13.6K Views
Copyright © 2025 MyJoVE Corporation. Wszelkie prawa zastrzeżone
Używamy plików cookie, aby ulepszyć Twoje wrażenia z korzystania z naszej witryny.
Kontynuując korzystanie z naszej witryny lub klikając „Kontynuuj”, wyrażasz zgodę na akceptację naszych plików cookie.