We wish to thank Juan J. Tena for the use of the homogenizer and the CABD Proteomics and Animal Husbandry facilities for technical support. This work was supported by the Spanish Ministry of Education, Culture and Sports through fellowship FPU16/03264 to J.D.H.C., the Association Fran&#231;aise contre les Myopathies (AFM) through fellowship grant #22450 to C.V.-G., an Institutional Grant MDM-2016-0687 (Maria de Maeztu Excellence Unit, Department of Gene Regulation and Morphogenesis at CABD) and BFU2017-83150-P to J.J.C. The Junta de Andaluc&#237;a grant P18-RT-4572, the FEDER Funding Program from the European Union, and Spanish Ministry of Science, Innovation and Universities grant RED2018-102576-T to P.N.

Mouse housing and tissue collection were performed using protocols approved by the Universidad Pablo de Olavide Ethics Committee (Sevilla, Spain; protocols 24/04/2018/056 and 12/03/2021/033) in accordance with Spanish Royal Decree 53/2013, European Directive 2010/63/EU, and other relevant guidelines.
1. Preparation of stocks, buffers, and reagents for the respiration assays
<ol>
	<li>Prepare the following stock solutions, which can be stored at the indicated temperature for months. Use ultrapure H2O in all cases.
	<ol>
		<li>Dissolve phosphate-buffered saline (PBS) tablets in H2O (1 tablet per 200 mL of H2O) to prepare 1x PBS. Autoclave the solution and store it at room temperature (RT).</li>
		<li>Dissolve 2 g of NaOH pellets in 50 mL of H2O to prepare 1 M NaOH.</li>
		<li>Prepare 0.1 M, 1 M, 5 M, and 10 M KOH stocks for pH calibration.</li>
		<li>Add 14.612 g of EDTA to 70 mL of H2O. Add NaOH pellets until the pH reaches 8.0 so that EDTA fully dissolves. Add H2O quantum satis (QS) to 100 mL. Autoclave the resulting 0.5 M EDTA (pH 8) solution and store it at RT.</li>
		<li>Add 19 g EGTA to 70 mL of H2O. Add NaOH pellets until the pH reaches 8.0 to allow the EGTA to dissolve fully. Add H2O QS to 100 mL. Autoclave the resulting 0.5 M EGTA (pH 8) solution and store it at RT.</li>
		<li>Add 2 mL of 0.5 M EDTA to 98 mL of PBS. Store the resulting 10 mM EDTA/PBS solution at RT.</li>
		<li>Dissolve 5.958 g of HEPES in 40 mL H2O. Adjust the pH to 7.2 with KOH and QS to 50 mL with H2O. Filter the resulting 0.5 M HEPES buffer through a 0.45 &#181;m mesh and store it at RT.</li>
		<li>Dissolve 3.402 g of KH2PO4 in up to 50 mL of H2O. Filter the resulting 0.5 M KH2PO4 solution&#160;through a 0.45 &#181;m mesh and store it at RT.</li>
		<li>Dissolve 9.521 g of anhydrous MgCl2 in up to 100 mL of H2O. Autoclave the resulting 1 M MgCl2 solution and store it at RT. 
		NOTE: As this is an exothermic reaction, proceed with caution and dissolve the MgCl2 on ice.</li>
	</ol>
	</li>
	<li>Prepare substrate and inhibitor stock solutions (see Table 1). Aliquot and store them at -20 &#176;C. Avoid freeze-thaw cycles. As an exception, always prepare pyruvic acid immediately before use.
	<ol>
		<li>Prepare in ultrapure H2O: 0.5 M succinate, 0.5 M pyruvic acid, 0.5 M malic acid, 100 mM ADP, 1 M ascorbic acid, and 50 mM N,N,N&#8242;,N&#8242;-tetramethyl-para-phenylene-diamine (TMPD) (protect from light).</li>
		<li>Prepare in 100% dimethyl sulfoxide (DMSO): 50 mM palmitoyl-L-carnitine, 4 mM rotenone, 20 mM carbonyl cyanide-p-trifluoromethoxyphenylhydrazone (FCCP), 4 mM oligomycin, and 5 mM Antimycin A. 
		NOTE: Do not exceed 0.1% final DMSO concentration in the microplate wells. Therefore, prepare highly concentrated stock solutions to stay below this limit.</li>
	</ol>
	</li>
	<li>Prepare the buffers for mitochondria isolation and protein quantification freshly on the day of the experiment. Use ultrapure H2O in all cases and keep all buffers on ice unless otherwise stated. 
	NOTE: To save time, all reagents can be weighed and kept in the appropriate containers (e.g., 15 mL tubes) at the right temperature on the previous day.
	<ol>
		<li>To prepare 10% free fatty acids (FFA) BSA, thoroughly dissolve 150 mg of FFA BSA in 1.5 mL of H2O by inversion/rotatory wheel. Do not vortex to avoid foaming.</li>
		<li>To prepare 1x Bradford reagent, dilute the 5x commercial stock solution with H2O and keep it in the dark at RT.</li>
		<li>To prepare 8x Mitochondria Buffer (MB), dissolve 4.112 g of sucrose and 763 mg of HEPES in 15 mL of H2O. Adjust the pH to 7.2, add 1.6 mL of 10% FFA BSA and QS to 20 mL with H2O.</li>
		<li>To prepare 20 mL of Isolation Buffer 1 (IB1) (4 mL used per sample), dissolve 400 &#181;L of 0.5 M EDTA, 784 mg of D-mannitol, and 2.5 mL of 8x MB in 15 mL of H2O. Adjust the pH to 7.2 and QS with H2O.</li>
		<li>To prepare 5 mL of Isolation Buffer 2 (IB2) (500 &#181;L used per sample), dissolve 30 &#181;L of 0.5 M EGTA, 196 mg of D-mannitol, and 625 &#181;L of 8x MB in 4 mL of H2O. Adjust the pH to 7.2 and QS with H2O.</li>
		<li>To prepare 5 mL of Resuspension Buffer (RB) (200 &#181;L used per sample), dissolve 120 mg of sucrose, 191.3 mg of D-mannitol, 50 &#181;L of 0.5 M HEPES, and 10 &#181;L of 0.5 M EGTA in 4 mL of H2O. Adjust the pH to 7.2 and QS with H2O.</li>
		<li>To prepare 2x&#160;Mitochondrial Assay Solution-1 (MAS-1), dissolve 1.199 g of sucrose, 2.8 g of mannitol, 1 mL of 0.5 M KH2PO4, 250 &#181;L of 1 M MgCl2, 200 &#181;L of 0.5 M HEPES, and 100 &#181;L of 0.5 M EGTA in 20 mL of H2O. Adjust the pH to 7.2 and QS to 25 mL with H2O. Keep in ice for short periods. For longer periods, keep it at 4 &#176;C to avoid precipitation.</li>
		<li>To prepare 1x Coupling Assay medium (CAM), prepare two different MAS-1-based buffers: 1) CAM+BSA for the CA assay proper, and 2) CAM-BSA for preparing the assay inhibitors. Always keep the pyruvate:malate ratio at 10:1. 
		NOTE: As BSA can clog the injection ports, dilute the inhibitors in BSA-free CAM.
		<ol>
			<li>To prepare CAM+BSA, dilute 300 &#181;L of 0.5 M pyruvic acid, 30 &#181;L of 0.5 M malic acid, and 7.5 mL of 2x MAS-1 in 6 mL of H2O. Adjust the pH to 7.2. Add 300 &#181;L of 10% FFA BSA and QS to 15 mL with H2O.</li>
			<li>To prepare CAM-BSA, dilute 120 &#181;L of 0.5 M pyruvic acid, 12 &#181;L of 0.5 M malic acid, and 3 mL of 2x MAS-1 in 2 mL of H2O. Adjust the pH to 7.2 and QS to 6 mL with H2O.</li>
		</ol>
		</li>
		<li>To prepare 1x Electron Flow Assay medium (EFAM), prepare both BSA-containing and BSA-free EFAM buffers.
		<ol>
			<li>To prepare EFAM+BSA, dilute 300 &#181;L of 0.5 M pyruvic acid, 60 &#181;L of 0.5 M malic acid, 3 &#181;L of 20 mM FCCP, and 7.5 mL of 2x MAS-1 in 6 mL of H2O. Adjust the pH to 7.2. Add 300 &#181;L of 10% FFA BSA and QS to 15 mL with H2O.</li>
			<li>To prepare EFAM-BSA, dilute 120 &#181;L of 0.5 M pyruvic acid, 24 &#181;L of 0.5 M malic acid, 1.2 &#181;L of 20 mM FCCP, and 3 mL of 2x MAS-1 in 2 mL of H2O. Adjust the pH to 7.2 and QS to 6 mL with H2O.</li>
		</ol>
		</li>
		<li>To prepare 1x &#946;-oxidation medium (BOXM), prepare BSA-containing and BSA-free BOXM solutions.
		<ol>
			<li>To prepare BOXM+BSA, dilute 12 &#181;L of 50 mM palmitoyl-L-carnitine, 30 &#181;L of 0.5 M malic acid, and 7.5 mL of 2x MAS-1 in 7 mL of H2O. Adjust the pH to 7.2. Add 300 &#181;L of 10% FFA BSA and QS to 15 mL with H2O.</li>
			<li>To prepare BOXM-BSA, dilute 4.8 &#181;L of 50 mM palmitoyl-L-carnitine, 12 &#181;L of 0.5 M malic acid, and 3 mL of 2x MAS-1 in 2 mL of H2O. Adjust the pH to 7.2 and QS to 6 mL with H2O.</li>
		</ol>
		</li>
	</ol>
	</li>
</ol>
2. Muscle dissection, homogenization, and mitochondrial isolation
<ol>
	<li>Place all materials and buffers on ice. Ensure all materials are ice-cold during the entire procedure to protect mitochondria from damage.</li>
	<li>Place three 50 mL beakers per sample on ice, and add the following solutions: 10 mL of PBS in beaker 1, 10 mL of 10 mM EDTA/PBS in beaker 2, and 4 mL of IB1 in beaker 3.</li>
	<li>Euthanize the mouse by cervical dislocation. Avoid CO2 euthanasia as skeletal muscles could become hypoxic, interfering with respiration analyses.</li>
	<li>Spray the right hindlimb with 70% ethanol to prevent fur from shedding, and tape limb to the cork dissection board. Tape the left forelimb as well.</li>
	<li>Make an incision with a sterile disposable scalpel through the skin from knee to toe.</li>
	<li>Grip the skin with toothed forceps at ankle level and cut it with fine scissors around the ankle.</li>
	<li>Ease the skin away from the underlying musculature with fine-tip tweezers in one hand while pulling it up with toothed forceps in the other hand.</li>
	<li>Dissect all skeletal muscles from ankle to knee (Figure 2).
	<ol>
		<li>Remove all connective tissue over the tibialis anterior (TA) muscle to facilitate muscle extraction using fine tweezers and scissors.</li>
		<li>Find the four distal tendons of the EDL muscle and section them close to their insertions in the toes. Locate the TA distal tendon and cut it close to its insertion, always below the ankle.</li>
		<li>Carefully pull the TA and EDL tendons above the ankle to liberate the loose ends.</li>
		<li>Grip the loose ends of the tendons and ease the muscles away from the rest of the musculature and bones by pulling them up. Use fine tweezers or scissors to facilitate the process. Proceed with care to avoid myofiber contraction.</li>
		<li>Cut the proximal tendon of the EDL and the TA muscle as close as possible to the kneecap.</li>
		<li>Turn the mouse upside down to proceed with gastrocnemius (GA) and soleus muscle extraction.</li>
		<li>Grip the pocket formed between the biceps femoris and the GA with toothed forceps. Use fine scissors to separate these muscles and visualize the proximal GA tendon.</li>
		<li>Grip the Achilles tendon with fine forceps and carefully cut it with fine scissors. Release the GA and soleus muscles from the underlying bone by pulling them up through their tendons. Cut the proximal GA tendon liberating it together with the underlying soleus.</li>
		<li>Carefully dissect the remaining muscles from tendon to tendon following the same procedure until only bones remain.</li>
		<li>Re-pin the mouse in the initial position to dissect the quadriceps muscle.</li>
		<li>Discard the adipose tissue over the quadriceps at the proximal side using toothed forceps and fine scissors.</li>
		<li>Insert fine tweezers between the quadriceps and the femur and move them in both directions along the femur axis to separate the muscle from the bone.</li>
		<li>Grip the distal quadriceps muscle tendons with toothed forceps and cut the tendon with fine scissors as close as possible to the kneecap.</li>
		<li>Pull the quadriceps up and liberate it at the proximal insertion with fine scissors.</li>
	</ol>
	</li>
	<li>Repeat steps 4-8 from this section&#160;with the left hindlimb.</li>
	<li>Rinse all muscles in Beaker 1 first and then in Beaker 2.</li>
	<li>Transfer all muscles to Beaker 3 and finely mince all muscles with sharp scissors on ice.</li>
	<li>Transfer the suspension to a C Tube (purple lid), always keeping it in ice.</li>
	<li>Tightly close the C Tube and attach it upside down onto the sleeve of the homogenizer. Make sure that the sample material is in the area of the rotator/stator. Select the 1-min program called m_mito_tissue_01.</li>
	<li>Divide the homogenate into two 2 mL prechilled microcentrifuge tubes and centrifuge at 700 &#215; g for 10 min at 4 &#176;C in a tabletop centrifuge.</li>
	<li>Transfer the supernatants to new 2 mL prechilled tubes, carefully avoiding fat and non-homogenized tissue. Store the pellets at -80 &#176;C for fragmentation purity determination (fraction N) (Figure 3).</li>
	<li>Centrifuge the supernatants at 10,500 &#215; g for 10 min at 4 &#176;C.</li>
	<li>Transfer the supernatants to new 2 mL prechilled tubes and label them as Supernatant Number 1 (SN1). Store them at -80 &#176;C for fragmentation purity determination (Figure 3).</li>
	<li>Resuspend and combine both pellets in a total volume of 500 &#181;L of IB2 in ice.</li>
	<li>Centrifuge at 10,500 &#215; g for 10 min at 4&#176;C.</li>
	<li>Transfer the supernatant to a new 2 mL prechilled tube and label it as Supernatant Number 2 (SN2). Store it at -80 &#176;C for fragmentation purity determination (Figure 3).</li>
	<li>Resuspend the final mitochondrial pellet in 200 &#181;L of RB. Quickly set aside 10 &#181;L for protein quantification and immediately add 10 &#181;L of 10% FFA BSA to the remaining mitochondrial suspension to prevent damage.</li>
	<li>Determine protein concentration using the Bradford assay.
	<ol>
		<li>For the standard curve, prepare 30 &#181;L of serial dilutions of known concentration of a protein in RB buffer. For example, use 1 mg/mL, 0.5 mg/mL, 0.25 mg/mL, 0.125 mg/mL, 0.0625 mg/mL, and 0 mg/mL of BSA.</li>
		<li>Prepare 1:3 and 1:6 serial dilutions of the mitochondrial samples in RB buffer.</li>
		<li>In a 96-well flat-bottom plate, first load 2.5 &#181;L of sample/standard per well. Next, add 10 &#181;L of 1 M NaOH to each sample and, finally, 200 &#181;L of 1x Bradford reagent. Mix well, avoiding air bubbles. Check visually that the color of the samples is within the calibration line. Always perform the analysis in triplicate.</li>
		<li>Incubate the plates for 5 min at RT in the dark, and read the absorbance at 595 nm in a microplate spectrophotometer.</li>
		<li>Calculate the standard curve by plotting the absorbance values (y-axis) versus the corresponding protein concentration of the dilutions prepared in step 22.1 in this section (x-axis).</li>
		<li>Calculate the total amount of protein in the mitochondrial samples by extrapolation with the standard curve.</li>
	</ol>
	</li>
</ol>
3. Preparation of the microplate-based respirometric assays
<ol>
	<li>Hydrate the respirometric assay sensor at least 12 h before the experiment with 1 mL of calibration buffer per well. Incubate at 37 &#176;C (no CO2). 
	NOTE: Hydrated sensors can be used for up to 72 h. The cartridge should be handled carefully during this step: if anything touches the sensors, measurement sensibility could be affected.</li>
	<li>Prechill the preparative centrifuge with the swinging bucket microplate rotor and the corresponding microplate adapters at 4 &#176;C.</li>
	<li>Turn on the computer, open the analysis software, and select the desired protocol. 
	NOTE: A click is heard when the software connects to the oxygen consumption-measuring instrument. The heating sensor should be green and at 37 &#176;C before the experiment starts.</li>
	<li>Prepare the inhibitor solutions from the stocks indicated in section 1, step 2&#160;according to the assay to be performed. Prepare enough volume for each solution. See Table 1 and Table 2 for reference.</li>
	<li>Add the appropriate volume of each inhibitor in each port, insert the cartridge into the oxygen consumption-measuring instrument, and start calibration. 
	NOTE: Adding inhibitor to the cartridge and inserting the cartridge into the instrument takes15-20 min. Ensure the correct cartridge components are introduced. The cartridge lid and hydro booster could be discarded while sensor cartridge and utility place are needed.</li>
	<li>Centrifuge the concentrated mitochondrial suspension of section 2, step 21&#160;at 10,500 &#215; g for 10 min at 4 &#176;C.</li>
	<li>Resuspend the mitochondrial pellet in 100 &#181;L of 1x CAM+BSA, 1x EFAM+BSA, or 1x BOXM+BSA, depending on the protocol to be performed.</li>
	<li>Further&#160;dilute the concentrated mitochondrial sample to a final 0.2 &#181;g/&#181;L concentration in the corresponding assay medium.</li>
	<li>Seed 50 &#181;L of the suspension (total 10 &#181;g of protein) per well in a prechilled 24-well microplate on ice. Do not add mitochondria in the background correction wells; only add the corresponding assay medium. Store the remaining mitochondrial suspension at -80 &#176;C for fragmentation purity determination (Figure 3).</li>
	<li>Spin the microplate in the prechilled preparative centrifuge at 2,000 &#215; g for 20 min at 4 &#176;C. Counterweight to balance accordingly.</li>
	<li>Warm the remaining assay medium at 37 &#176;C during microplate centrifugation.</li>
	<li>After centrifugation, leave the microplate on the bench for 5 min to equilibrate. Add 450 &#181;L of warm assay medium for a final volume of 500 &#181;L per well at RT. Do this slowly and carefully, adding the medium to the wall of the wells to avoid detaching mitochondria.</li>
	<li>Place the microplate immediately in the oxygen consumption-measuring instrument without the lid, and start the protocol (Table 3). Ensure that the first step is a 10 min incubation to allow the microplate to warm.</li>
	<li>Once the experiment is finished, remove the cartridge and microplate, switch off the instrument, and start the analysis.</li>
</ol>
4. Analysis of the results
<ol>
	<li>In the case of the CA and BOX assays, perform the following analyses:
	<ol>
		<li>Record nonmitochondrial O2 consumption, which corresponds to the mean of the values obtained after Antimycin A and rotenone injection. 
		&#8203;NOTE: Antimycin A and rotenone are complex III and I inhibitors, respectively.</li>
		<li>Calculate basal respiration by subtracting nonmitochondrial O2 consumption from basal values (measurement points 1 and 2).</li>
		<li>Subtract nonmitochondrial O2 consumption from the values after the injection of the complex V substrate ADP (injection A) to determine mitochondrial state III.</li>
		<li>Subtract nonmitochondrial O2 consumption from the respiration values post injection of the complex V inhibitor oligomycin (injection B) to obtain mitochondrial state IVo.</li>
		<li>Calculate mitochondrial state IIIu by deducting nonmitochondrial O2 consumption from respiration post FCCP injection (injection C). 
		NOTE: FCCP is a potent mitochondrial oxidative phosphorylation uncoupler. ATP synthesis is bypassed in its presence, and the ETC attains maximal activity.</li>
		<li>Subtract basal respiration values from the mitochondrial state IIIu values to obtain mitochondrial spare capacity, which is the capacity to generate extra ATP in case of increased energy demand.</li>
		<li>Divide mitochondrial state IIIu by state IVo values to obtain the Respiratory Control Ratio (RCR). 
		NOTE: Negative or null RCR values indicate that mitochondrial coupling is affected.</li>
	</ol>
	</li>
	<li>In reference to EFA, perform the following calculations:
	<ol>
		<li>Obtain residual activity by calculating the mean value post rotenone and Antimycin A injection (injections A and C).</li>
		<li>Calculate complex I to IV (CI-CIV) activity by subtracting residual activity from the basal values (measurement points 1 and 2).</li>
		<li>Subtract residual activity from the values post injection of the CII substrate succinate (injection B) to obtain CII-CIII-CIV activity.</li>
		<li>Calculate CIV activity by deducting the residual activity from the values obtained after injecting the cytochrome c-reducing agents, ascorbic acid and TMPD (injection D).</li>
	</ol>
	</li>
	<li>Represent all results using bar plots, as in Figure 4, to extract appropriate conclusions.</li>
</ol>

<ol>
	<li>Spinelli, J. B., Haigis, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+multifaceted+contributions+of+mitochondria+to+cellular+metabolism.">The multifaceted contributions of mitochondria to cellular metabolism.</a> Nature Cell Biology. 20 (7), 745-754 (2018).</li><li>Alberts, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+mitochondrion.">The mitochondrion.</a> Molecular Biology of the Cell, 4th edition. , (2002).</li><li>Turunen, M., Olsson, J., Dallner, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Metabolism+and+function+of+coenzyme+Q.">Metabolism and function of coenzyme Q.</a> Biochimica et Biophysica Acta. 1660 (1-2), 171-199 (2004).</li><li>Alc&#225;zar-Fabra, M., Trevisson, E., Brea-Calvo, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Clinical+syndromes+associated+with+coenzyme+Q10+deficiency.">Clinical syndromes associated with coenzyme Q10 deficiency.</a> Essays in Biochemistry. 62 (3), 377-398 (2018).</li><li>Banerjee, R., Purhonen, J., Kallij&#228;rvi, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+mitochondrial+coenzyme+Q+junction+and+complex+III:+biochemistry+and+pathophysiology.">The mitochondrial coenzyme Q junction and complex III: biochemistry and pathophysiology.</a> The FEBS Journal. , (2021).</li><li>Gorman, G. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mitochondrial+diseases.">Mitochondrial diseases.</a> Nature Reviews. Disease Primers. 2, 16080 (2016).</li><li>Villalba, J. M., Navas, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Regulation+of+coenzyme+Q+biosynthesis+pathway+in+eukaryotes.">Regulation of coenzyme Q biosynthesis pathway in eukaryotes.</a> Free Radical Biology &amp; Medicine. 165, 312-323 (2021).</li><li>Li, Z., Graham, B. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measurement+of+mitochondrial+oxygen+consumption+using+a+Clark+electrode.">Measurement of mitochondrial oxygen consumption using a Clark electrode.</a> Methods in Molecular Biology. 837, 63-72 (2012).</li><li>Rogers, G. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+throughput+microplate+respiratory+measurements+using+minimal+quantities+of+isolated+mitochondria.">High throughput microplate respiratory measurements using minimal quantities of isolated mitochondria.</a> PloS One. 6 (7), 21746 (2011).</li><li>Pala, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Distinct+metabolic+states+govern+skeletal+muscle+stem+cell+fates+during+prenatal+and+postnatal+myogenesis.">Distinct metabolic states govern skeletal muscle stem cell fates during prenatal and postnatal myogenesis.</a> Journal of Cell Science. 131 (14), 212977 (2018).</li><li>Shintaku, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MyoD+regulates+skeletal+muscle+oxidative+metabolism+cooperatively+with+alternative+NF-&#312;B.">MyoD regulates skeletal muscle oxidative metabolism cooperatively with alternative NF-&#312;B.</a> Cell Reports. 17 (2), 514-526 (2016).</li><li>Li, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+high-throughput+method+for+real-time+assessment+of+cellular+metabolism+in+intact+long+skeletal+muscle+fibre+bundles.">Development of a high-throughput method for real-time assessment of cellular metabolism in intact long skeletal muscle fibre bundles.</a> The Journal of Physiology. 594 (24), 7197-7213 (2016).</li><li>Schuh, R. A., Jackson, K. C., Khairallah, R. J., Ward, C. W., Spangenburg, E. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+mitochondrial+respiration+in+intact+single+muscle+fibers.">Measuring mitochondrial respiration in intact single muscle fibers.</a> American Journal of Physiology. Regulatory, Integrative and Comparative Physiology. 302 (6), 712-719 (2012).</li><li>Rosenblatt, J. D., Lunt, A. I., Parry, D. J., Partridge, T. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Culturing+satellite+cells+from+living+single+muscle+fiber+explants.">Culturing satellite cells from living single muscle fiber explants.</a> In Vitro Cellular &amp; Developmental Biology. Animal. 31 (10), 773-779 (1995).</li><li>Keire, P., Shearer, A., Shefer, G., Yablonka-Reuveni, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation+and+culture+of+skeletal+muscle+myofibers+as+a+means+to+analyze+satellite+cells.">Isolation and culture of skeletal muscle myofibers as a means to analyze satellite cells.</a> Methods in Molecular Biology. 946, 431-468 (2013).</li><li>Shintaku, J., Guttridge, D. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+aerobic+respiration+in+intact+skeletal+muscle+tissue+by+microplate-based+respirometry.">Analysis of aerobic respiration in intact skeletal muscle tissue by microplate-based respirometry.</a> Methods in Molecular Biology. 1460, 337-343 (2016).</li><li>Bharadwaj, M. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+and+respirometric+assessment+of+mitochondria+isolated+from+skeletal+muscle+tissue+obtained+by+percutaneous+needle+biopsy.">Preparation and respirometric assessment of mitochondria isolated from skeletal muscle tissue obtained by percutaneous needle biopsy.</a> Journal of Visualized Experiments: JoVE. (96), e52350 (2015).</li><li>Garcia-Cazarin, M. L., Snider, N. N., Andrade, F. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mitochondrial+isolation+from+skeletal+muscle.">Mitochondrial isolation from skeletal muscle.</a> Journal of Visualized Experiments: JoVE. (49), e2452 (2011).</li><li>Iuso, A., Repp, B., Biagosch, C., Terrile, C., Prokisch, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessing+mitochondrial+bioenergetics+in+isolated+mitochondria+from+various+mouse+tissues+using+Seahorse+XF96+analyzer.">Assessing mitochondrial bioenergetics in isolated mitochondria from various mouse tissues using Seahorse XF96 analyzer.</a> Methods in Molecular Biology. 1567, 217-230 (2017).</li><li>Divakaruni, A. S., Rogers, G. W., Murphy, A. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+mitochondrial+function+in+permeabilized+cells+using+the+Seahorse+XF+analyzer+or+a+Clark-type+oxygen+electrode.">Measuring mitochondrial function in permeabilized cells using the Seahorse XF analyzer or a Clark-type oxygen electrode.</a> Current Protocols in Toxicology. 60, 1-16 (2014).</li><li>Das, K. C., Muniyappa, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Age-dependent+mitochondrial+energy+dynamics+in+the+mice+heart:+role+of+superoxide+dismutase-2.">Age-dependent mitochondrial energy dynamics in the mice heart: role of superoxide dismutase-2.</a> Experimental Gerontology. 48 (9), 947-959 (2013).</li><li>Aw, W. C., Bajracharya, R., Towarnicki, S. G., Ballard, J. W. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessing+bioenergetic+functions+from+isolated+mitochondria+in+Drosophila+melanogaster.">Assessing bioenergetic functions from isolated mitochondria in Drosophila melanogaster.</a> Journal of Biological Methods. 3 (2), 42 (2016).</li><li>Sakamuri, S. S. V. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measurement+of+respiratory+function+in+isolated+cardiac+mitochondria+using+Seahorse+XFe24+analyzer:+applications+for+aging+research.">Measurement of respiratory function in isolated cardiac mitochondria using Seahorse XFe24 analyzer: applications for aging research.</a> Gerontology. 40 (3), 347-356 (2018).</li><li>Boutagy, N. E., Pyne, E., Rogers, G. W., Ali, M., Hulver, M. W., Frisard, M. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation+of+mitochondria+from+minimal+quantities+of+mouse+skeletal+muscle+for+high+throughput+microplate+respiratory+measurements.">Isolation of mitochondria from minimal quantities of mouse skeletal muscle for high throughput microplate respiratory measurements.</a> Journal of Visualized Experiments: JoVE. (105), e53217 (2015).</li><li>Sperling, J. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+respiration+in+isolated+murine+brain+mitochondria:+implications+for+mechanistic+stroke+studies.">Measuring respiration in isolated murine brain mitochondria: implications for mechanistic stroke studies.</a> Neuromolecular Medicine. 21 (4), 493-504 (2019).</li><li>Boutagy, N. E., Rogers, G. W., Pyne, E. S., Ali, M. M., Hulver, M. W., Frisard, M. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Using+isolated+mitochondria+from+minimal+quantities+of+mouse+skeletal+muscle+for+high+throughput+microplate+respiratory+measurements.">Using isolated mitochondria from minimal quantities of mouse skeletal muscle for high throughput microplate respiratory measurements.</a> Journal of Visualized Experiments: JoVE. (105), e53216 (2015).</li></ol>

The authors declare that they have no conflicts of interest to disclose.

All methods used to study mitochondrial respiration have their limitations; hence, it is crucial to select the method that best suits a specific experimental question. This work provides an updated and detailed protocol to isolate mitochondria from mouse skeletal muscle to perform different respiratory assays to investigate mitochondrial function. Indeed, the study of mitochondrial bioenergetics in isolated mitochondria using microplate-based technologies is valuable to study tissue-specific respiration in terms of reproducibility, reliability, and complexity. Further, the use of isolated mitochondria confers control over substrate availability, facilitating the understanding of the underlying biological processes. Another positive aspect of using isolated mitochondria is that it is possible to study State III because the ATP generated after ADP injection is not converted again into new ADP as most of the transmembrane ATPases are lost. Moreover, in the assays described here, oligomycin is added to block potential nonspecific ATP synthesis20.
Several important considerations need to be highlighted for this protocol. First, isolated mitochondria are extremely sensitive and should be handled with care. The high content of sucrose and mannitol in the buffers used ensures the optimal osmotic conditions to protect the isolated mitochondria from damage. Nevertheless, the assay duration should be kept at a minimum to preserve mitochondrial viability and prevent detachment from the microplate once seeded. Thus, given that protocol steps, such as the preparation of assay media and substrate and inhibitor solutions, or the loading of the inhibitors in the respirometric assay cartridge, are time-consuming, every step should be perfectly coordinated. Further, unlike other methods based on enzymatic digestion21,24 and mortar and pestle homogenization17,19,21,23,24, the method described here relies on the use of an automated homogenizer, enabling fast and efficient sample homogenization. Importantly, mitochondrial suspensions are less sensitive if highly concentrated. Thus, only prepare dilutions immediately before using them. Finally, it is essential to work quickly during the respirometric assay proper. Usually, when analyzing cells in culture in these assays, three consecutive measurement steps are performed after the injection of substrates or inhibitors, which results in protocols that extend between 40 and 50 min., To ensure the viability of the isolated mitochondria throughout the whole procedure, the number of measurement steps is often kept to a minimum due to their vulnerability19,23,25, reducing the time it takes to complete the respirometric analysis to ~20 min. The protocols described in this work (Table 3) follow this trend, even though other previously published methods report efficient OCR profiles with longer and more standard measurement steps26.
For example, if two consecutive assays are going to be run with the same set of samples on the same day, prepare all reagents for the second assay during the first one except for the mitochondrial dilutions: only dilute, seed, and spin mitochondria immediately before starting the second assay, while the instrument is being calibrated. Once the experiment is completed, the RCR parameter (section 4, step 1.7) must be calculated to assess the quality of the mitochondrial preparations used. Usually, RCR values between 3.5 and 5 denote that mitochondrial integrity is optimal and show functional coupled oxidative respiration25. Assays with lower RCR values must be discarded because mitochondrial integrity was compromised during isolation. In these cases, consider washing the mitochondrial pellet twice (section 2, steps 19-21)22, as previously reported.
Second, maintaining the correct pH throughout the procedure is critical to obtaining successful results. Ensure that the pH of all solutions is set as indicated, that is, pH 7.2, and that the pH is always adjusted with KOH unless otherwise stated. Notably, the pH of BSA-containing buffers should not be directly measured with the pH meter as BSA can damage the probe. Thus, adjust the pH in the corresponding buffers before adding BSA. To avoid changes in the pH due to BSA addition, always use FFA BSA. Further, some ultrapure H2O batches could be acidic, so the use of commercially purified, pH 7 H2O is recommended. Furthermore, it is necessary to ensure that the pH meter is correctly calibrated and that it is the appropriate model to measure the pH of the chemicals to be prepared.
Third, it is crucial to correctly perform the sample collection step for protein measurement of the final mitochondrial suspension (section 2, step 21) to prevent mitochondrial destruction. Resuspend the pellet quickly but thoroughly, collect an aliquot, and add FFA BSA to the remaining suspension to conserve the osmotic balance and protect the mitochondria from damage. If FFA BSA were already present in the resuspension buffer, and thus, during protein quantification, the high protein content would confound the quantification results. This is why FFA BSA needs to be added after setting an aliquot aside for quantification.
Fourth, this method is highly versatile and can be adjusted to the experimenter&#39;s needs. For example, if the animal model under study is characterized by reduced muscle mass (e.g., sarcopenic mice), additional muscles can increase mitochondrial yield. Although an adult wild-type male C57BL/6N mouse was used in this work,&#160;animals of any gender, age, or genetic background, as well as specific muscle types, can be employed instead.
Fifth, respiratory values can differ between experiments due to slight variations in the composition of buffers and reagents, which need to be prepared fresh every time. Age, sex, genetic background, or environmental conditions can also have a profound impact on the results. However, a successful experiment should present increases in oxygen consumption after the injection of complex substrates such as ADP and succinate, decreases after the injection of inhibitors such as oligomycin or rotenone, and marked increases when the potent uncoupler FCCP is added. Moreover, to prevent high technical variability, ensure thorough resuspension of mitochondrial pellets to obtain homogeneous suspensions before seeding them in the microplate.
Sixth, if basal respiratory values are low, consider performing a titration experiment to adjust the amount of protein for seeding. Finally, because this work provides a method to obtain crude mitochondrial extracts, a certain grade of impurity associated with other organelles, mainly ER, is expected. A more aggressive fragmentation process to remove these impurities would be detrimental to mitochondrial viability, hindering the performance of respiratory assays. If purity is a concern, especially if it is not consistent between samples, assay results can be normalized relative to mitochondrial purity after running western blots against different organelle markers (Figure 3). To our knowledge, this is the first method that highlights concerns about mitochondrial purity in crude extracts. Usually, in other protocols for respirometric assays with isolated mitochondria, the same amount of protein extract is seeded in the wells to compare samples, assuming that the same amount of mitochondria is used in all cases. This is a reasonable assumption considering that isolation is performed in parallel in all samples. However, the genetic or environmental background of the samples under study may lead to considerable differences in the purity of the mitochondrial extracts. For example, if a given genetic mutation causes increased development of cytoplasmic ER, crude mitochondrial extracts from these animals could contain greater than expected ER content, and consequently, lower than expected mitochondrial protein. Thus, even if the same amount of total protein from control and mutant samples are seeded in the microplate, oxygen consumption of the mutants would be underestimated. Hence, it is recommended that the purity of the extracts of all the conditions under study must be determined. If the values are comparable, no normalization is needed. However, if purity values among samples differ considerably beyond the statistical error the experimenter is willing to accept, they should be used to normalize oxygen consumption results.
The present protocol has some limitations. Of note, this method has been optimized for skeletal muscle tissue isolated from mice. Adjustments may need to be made if using different tissues or skeletal muscle from different species. Additionally, when analyses are performed on isolated mitochondria, the normal cellular microenvironment is lost due to the absence of cellular context and the other organelles that could interact with mitochondria. This could lead to results that slightly deviate from physiological conditions. Finally, as the mitochondria are centrifuged, they adhere to the bottom of the wells. While completely necessary, the potential effects of centrifugation on their normal state are unknown.
It is important to take into account that, after performing the respirometric assay analyses, a reduction in oxygen consumption associated with ATP-linked or FCCP-stimulated respiration in isolated mitochondria could indicate potential mitochondrial alterations that could be explained by20: 1) restricted transport of substrates across the inner mitochondrial membrane, 2) decreased activity of the enzymes involved in the rate-limiting reactions of specific metabolic pathways such as the ETC, Krebs cycle, or &#946;-oxidation, or 3) impaired ETC function, among other possible explanations.
In summary, the updated method described here represents an adequate and reliable way to assess ETC and OXPHOS function from skeletal muscle tissue. It has multiple applications to evaluate how genetic modifications or the environment could affect mitochondrial respiration contributing to a specific phenotype. Remarkably, the present protocol could be adapted to other model organisms or be used with human samples to evaluate potential mitochondrial dysfunctions associated with human disease.

Mitochondria are the primary metabolic organelles in the cell1. These specialized membrane-enclosed organelles use nutrient molecules to produce energy in the form of adenosine triphosphate (ATP) by OXPHOS. This process relies on the transfer of electrons from donor molecules in a series of redox reactions in the ETC2. CoQ is the only redox-active lipid that is endogenously produced in all cellular membranes and circulating lipoproteins that shows antioxidant function3. It is an essential component of the ETC, transferring electrons from NADH-dependent complex I and FADH2-dependent complex II to complex III, although many other reductases can drive the reduction of mitochondrial CoQ to ubiquinol as a mandatory step in multiple cellular metabolic pathways4,5.
Throughout the process, an electrochemical proton gradient is created across the mitochondrial inner membrane, which is transformed into biologically active energy by the ATP synthase complex V2. Consequently, mitochondrial dysfunction leads to a myriad of pathological conditions mainly affecting tissues with high-energy requirements-the brain, heart, and skeletal muscle6,7. Therefore, it is fundamental to develop methods to accurately analyze mitochondrial bioenergetics to investigate its role in health and disease, particularly in highly energetic tissues such as skeletal muscles.
The Clark-type oxygen electrode has been classically used in the study of mitochondrial respiration8. However, this system has been progressively displaced by higher-resolution technologies, with microplate-based oxygen consumption technologies such as Agilent Seahorse XF analyzers being especially popular9. In the skeletal muscle field, these studies are typically conducted in cultured cells, mainly in the C2C12 immortalized mouse myoblast cell line or primary cultures derived from satellite cells10,11. However, these studies do not fully recapitulate the situation in vivo, especially when investigating mitochondrial biology and function at the tissue level upon specific insults, nongenetic interventions, or genetic manipulations.
Furthermore, respiration assays in cells are more complex due to additional factors, including extra-mitochondrial demand of ATP and assay substrates or signaling events, which could mislead the interpretation of the results. Alternatively, it is also possible to use single or bundles of freshly isolated myofibers from muscles. However, the isolation method is technically challenging and only feasible for a few muscle types. In this case, flexor digitorum brevis (FDB) and extensor digitorum longus (EDL) muscles are mainly used10,12,13, although a few reports describe the use of other muscle types as well14,15.
Bioenergetic profiling of skeletal muscle sections has also been reported16. The major advantage of this method is that intact muscles can be studied (the authors show that slicing through fibers does not disturb results when compared with isolated myofibers). However, mitochondrial access to substrates and assay inhibitors is limited, and thus, only a few parameters can be measured16. Finally, isolated mitochondria can be likewise employed9,17,18,19. In this case, mitochondria lose their cytosolic environment, which could affect their function. In contrast, this method guarantees access to substrates and inhibitors, enables the analysis of a plethora of sample types, and typically requires less material.
This paper describes a method to perform the bioenergetic profiling of isolated mitochondria from mouse skeletal muscle using microplate-based respirometric assays (Figure 1). In particular, three protocols are detailed: the Coupling Assay, CA to assess the degree of coupling between the ETC and the OXPHOS machinery; the Electron Flow Assay, EFA to measure the activity of the individual ETC complexes; and the BOX assay to determine mitochondrial &#946;-oxidation capacity. Notably, only small amounts of samples are required compared with conventional respirometry methods. The isolation protocol used here has been modified from the method published elsewhere18.

<table><tbody><tr><td>ADP</td><td>Sigma</td><td>A5285</td><td>Stock at -20 &amp;deg;C</td></tr><tr><td>AKT antibody</td><td>Cell Signaling Technology</td><td>C67E7</td><td>Rabbit (Host species)</td></tr><tr><td>anti-Goat HRP</td><td>Sigma</td><td>401504</td><td>Rabbit (Host species)</td></tr><tr><td>anti-Mouse HRP</td><td>Cell Signaling</td><td>#7076</td><td>Horse (Host species)</td></tr><tr><td>Antimycin A</td><td>Sigma</td><td>A8674</td><td>Stock at -20 &amp;deg;C</td></tr><tr><td>anti-Rabbit HRP</td><td>Cell Signaling</td><td>#7074</td><td>Goat (Host species)</td></tr><tr><td>Ascorbic acid</td><td>Sigma</td><td>A5960</td><td>Stock at RT</td></tr><tr><td>Bactin antibody</td><td>Sigma</td><td>MBS4-48085</td><td>Goat (Host species)</td></tr><tr><td>Bio-Rad Protein Assay Kit II</td><td>Bio-Rad</td><td>5000002</td><td>It includes 5x Bradford reagent and BSA of known concentration for the standard curve</td></tr><tr><td>BSA, fraction V, Fatty Acid-Free</td><td>Calbiochem</td><td>126575</td><td>Stock at 4 &amp;deg;C</td></tr><tr><td>C tube</td><td>Miltenyi Biotec</td><td>130-093-237</td><td>Purple lid</td></tr><tr><td>Calnexin antibody</td><td>ThermoFisher</td><td>MA3-027</td><td>Mouse (Host species)</td></tr><tr><td>D-mannitol</td><td>Sigma</td><td>M4125</td><td>Stock at RT</td></tr><tr><td>EDTA</td><td>BDH</td><td>280254D</td><td>Stock at 4 &amp;deg;C</td></tr><tr><td>EGTA</td><td>Sigma</td><td>E-4378</td><td>Stock at RT</td></tr><tr><td>FCCP</td><td>Sigma</td><td>C2920</td><td>Stock at -20 &amp;deg;C</td></tr><tr><td>gentleMACS Dissociator</td><td>Miltenyi Biotec</td><td>130-093-235</td><td>Homogenizer</td></tr><tr><td>HEPES</td><td>Sigma</td><td>H3375</td><td>Stock at RT</td></tr><tr><td>HSP70 antibody</td><td>Proteintech</td><td>10995-1-AP</td><td>Rabbit (Host species)</td></tr><tr><td>LDH-A antibody</td><td>Santa Cruz Biotechnology</td><td>SC27230</td><td>Goat (Host species)</td></tr><tr><td>Magnesium chloride</td><td>ChemCruz</td><td>sc-255260A</td><td>Stock at RT</td></tr><tr><td>Malic acid</td><td>Sigma</td><td>P1645</td><td>Stock at RT</td></tr><tr><td>Microplate spectrophotometer</td><td>BMG LABTECH GmbH</td><td>POLARstar OMEGA S/N 415-0292</td><td>Stock at RT</td></tr><tr><td>Milli-Q water</td><td>Millipore system</td><td>F7HA17757A</td><td>Ultrapure water</td></tr><tr><td>mtTFA antibody</td><td>Santa Cruz Biotechnology</td><td>SC23588</td><td>Goat (Host species)</td></tr><tr><td>Na+/K+-ATPase &amp;alpha;1 antibody</td><td>Novus Biologicals</td><td>NB300-14755</td><td>Mouse (Host species)</td></tr><tr><td>Oligomycin</td><td>Sigma</td><td>O4876</td><td>Stock at -20 &amp;deg;C</td></tr><tr><td>Palmitoyl-L-carnitine</td><td>Sigma</td><td>P1645</td><td>Stock at -20 &amp;deg;C</td></tr><tr><td>PBS tablets</td><td>Sigma</td><td>P4417-100TAB</td><td>1x stock at RT</td></tr><tr><td>Potassium dihydrogen phosphate</td><td>ChemCruz</td><td>sc-203211</td><td>Stock at RT</td></tr><tr><td>Potassium hydroxide</td><td>Sigma</td><td>60377</td><td>Stock at RT</td></tr><tr><td>Pyruvic acid</td><td>Sigma</td><td>107360</td><td>Stock at 4 &amp;deg;C</td></tr><tr><td>Rotenone</td><td>Sigma</td><td>R8875</td><td>Stock at -20 &amp;deg;C</td></tr><tr><td>Seahorse XF24 mitochondrial flux analyzer</td><td>Agilent Technologies</td><td>420179</td><td>XFe24 model</td></tr><tr><td>Seahorse XFe24 FluxPak mini</td><td>Agilent Technologies</td><td>102342-100</td><td>The kit includes cartridges, microplates, and calibrant solution</td></tr><tr><td>Succinate</td><td>Sigma</td><td>S7626</td><td>Stock at RT</td></tr><tr><td>Sucrose</td><td>Sigma</td><td>S9378</td><td>Stock at RT</td></tr><tr><td>TIMM23 antibody</td><td>Abcam</td><td>ab230253</td><td>Rabbit (Host species)</td></tr><tr><td>TMPD</td><td>Sigma</td><td>T7394</td><td>Stock at -20 &amp;deg;C</td></tr><tr><td>TOMM20 antibody</td><td>Abcam</td><td>ab56783</td><td>Mouse (Host species)</td></tr><tr><td>VDAC antibody</td><td>Abcam</td><td>ab15895</td><td>Rabbit (Host species)</td></tr></tbody></table>

isolation of mitochondria from mouse skeletal muscle for respirometric assays

Most of the cell&#39;s energy is obtained through the degradation of glucose, fatty acids, and amino acids by different pathways that converge on the mitochondrial oxidative phosphorylation (OXPHOS) system, which is regulated in response to cellular demands. The lipid molecule Coenzyme Q (CoQ) is essential in this process by transferring electrons to complex III in the electron transport chain (ETC) through constant oxidation/reduction cycles. Mitochondria status and, ultimately, cellular health can be assessed by measuring ETC oxygen consumption using respirometric assays. These studies are typically performed in established or primary cell lines that have been cultured for several days. In both cases, the respiration parameters obtained may have deviated from normal physiological conditions in&#160;any given organ or tissue.
Additionally, the intrinsic characteristics of cultured single fibers isolated from skeletal muscle impede this type of analysis. This paper presents an updated and detailed protocol for the analysis of respiration in freshly isolated mitochondria from mouse skeletal muscle. We also provide solutions to potential problems that could arise at any step of the process. The method presented here could be applied to compare oxygen consumption rates in diverse transgenic mouse models and study the mitochondrial response to drug treatments or other factors such as aging or sex. This is a feasible method to respond to crucial questions about mitochondrial bioenergetics metabolism and regulation.

The protocol presented here allows the in vivo analysis of mitochondrial respiration through the isolation of mitochondria from mouse skeletal muscle. An outline of the method is shown in Figure 1. After dissecting skeletal muscles from the hindlimbs (Figure 2), tissues are homogenized and mitochondria purified, under isotonic conditions, through serial centrifugations. The purity of the different fractions obtained during the isolation process can be analyzed by western blot using antibodies against different organelle markers. Figure 3A shows the general protein profile from the different fractions showing distinct protein populations in the fractions isolated.
Figure 3B shows that all mitochondrial content is in the mitochondrial fraction, as evidenced by the strong signals for markers of the outer (VDAC and TOMM20) and inner (TIMM23) mitochondrial membranes, and even for nucleoid-associated proteins (mtTFA). All nuclei and cytoskeleton (&#946;-actin) are present in Fraction N, which represents nuclei and undisrupted material (Figure 3C). Moreover, most of the endoplasmic reticulum (ER) (Calnexin), plasma membrane (Na+/K+-ATPase&#945;1), or cytoplasm markers (LDHA, HSP70, or AKT) remain in the SN1 or SN2 fractions, highlighting the high purity obtained during isolation (Figure 3C). However, there are a few traces of ER contamination in the mitochondrial fraction, possibly due to the proximity of these organelles. Given the results obtained in subsequent respiratory assays, the isolation procedure described here yields highly pure, viable mitochondrial preparations.
Both CA and BOX assays permit the calculation of different mitochondrial states in the presence of several substrates that stimulate specific metabolic pathways. Specifically, these assays are performed in the presence of pyruvic acid or palmitoyl-L-carnitine chloride. Pyruvic acid is a substrate of the Krebs cycle; malic acid is a Krebs cycle intermediary and an NADH inductor, while palmitoyl-L-carnitine is a substrate of the fatty acid &#946;-oxidation pathway. (Figure 4A,B). In both assays, the first state that can be measured is the basal respiration rate, which represents mitochondrial respiration in the presence of the substrates initially added to the assay medium. Then, mitochondrial State III is achieved, which represents ATP production from ADP and inorganic phosphate, showing the maximal respiration in a coupled state. Thus, there is an increase in oxygen consumption after ADP addition, as observed in Figure 4A,B.
Further, State IVo indicates the proton leak associated with the inhibition of ATP synthase by oligomycin, which leads to a decrease in respiration, as observed in the CA and BOX graphs (Figure 4A,B). The addition of FCCP leads to State IIIu, which shows the maximal respiratory capacity that mitochondria can display in an uncoupled state when oxygen consumption reaches its highest level in these assays. To calculate all these states, it is fundamental first to determine nonmitochondrial respiration, which is obtained at the end of the assay when Antimycin A and rotenone are injected to inhibit oxidative respiration. As shown in Figure 4A,B, these values need to be always below basal respiration and very close to zero in the case of assays with isolated mitochondria like these assays described here. Finally, the RCR parameter must be calculated to assess mitochondrial integrity. It reflects whether mitochondria can react to ADP by producing ATP at a high rate with a low proton leak. The mean RCR values found in the CA and BOX assays were 5.78 &#177; 1.03 and 3.47 &#177; 0.42 (Figure 4A,B), respectively, which are in agreement with optimal RCRs reported previously21,22,23,24.
Additionally, the EFA examines the activity of the ETC complexes individually or in combination through the injection of specific substrates and inhibitors (Figure 4C). CI-CIV activity represents mitochondrial respiration based on pyruvate and malate substrates when no complexes are inhibited; in this case, most of the electrons go through CI. As rotenone is a specific inhibitor of CI, CI is blocked after its addition, resulting in decreased oxygen consumption (Figure 4C). CII-CIII-CIV activity shows respiration when only CI is blocked, and CII is activated: succinate, injected through port B, is a specific substrate of complex II (succinate dehydrogenase). Thus, CII is reduced, initiating the electron flow from CII to CIV, while CI is still inhibited by the previous rotenone injection, producing an increase in oxygen consumption (Figure 4C). Antimycin A addition inhibits CIII, blocking the electron flow through the ETC and reducing oxygen consumption. Further, CIV activity is determined when it is stimulated by cytochrome C oxidation after being reduced by the addition of ascorbic acid/TMPD; Figure 4C shows that CIV activation produces an increase in oxygen consumption. Finally, residual activity refers to oxygen consumption when the oxidative phosphorylation chain is inactivated after rotenone and Antimycin A addition. This value establishes the background for the calculation of the activity of the complexes as indicated in protocol steps 2.2-2.4 in section 4.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/63336/63336fig01.jpg" /> 
Figure 1: Schematic visualization of the method. Abbreviations: OCR = oxygen consumption rate; ADP = adenosine diphosphate; OL = oligomycin; FCCP = carbonyl cyanide-p-trifluoromethoxyphenylhydrazone; AntA = Antimycin A; Rot = rotenone. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/63336/63336fig01large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 2" class="xfigimg" src="/files/ftp_upload/63336/63336fig02.jpg" /> 
Figure 2: Dissection and isolation of murine skeletal muscles from hindlimbs for mitochondrial respiration analyses. (A) The right hindlimb was stretched and immobilized with tape. (B) An incision was made through the skin from next to the ankle, stopping proximal to the knee. Connective tissue overlying the TA was carefully removed. EDL (C) and TA (D) tendons were sectioned close to their insertions. The TA tendon was pulled up to ease the muscle away from the underlying musculature and bone. Then, the TA was cut proximally, close to the ventral crest to the tibia. Similarly, the EDL muscle was eased away, and the proximal tendon was meticulously cut at the side of the knee. (F) Right hindlimb after TA and EDL dissection. (G) In the posterior hindlimb, the Achilles tendon was sectioned to dissect GA and soleus muscles. (H) GA and soleus were carefully liberated from the tibial bone. (I) The remaining muscles were collected from ankle to knee until only the fibula and tibial bones remained. (J) Hindlimb after dissection. (K) Quadriceps was dissected. (L) All skeletal muscles collected for posterior mitochondrial isolation. The process was performed for both hindlimbs. Abbreviations: TA = tibialis anterior; EDL = extensor digitorum longus; GA = gastrocnemius. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/63336/63336fig02large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 3" class="xfigimg" src="/files/ftp_upload/63336/63336fig03.jpg" /> 
Figure 3: Purity of the fragmentation process. (A) General protein profile stained with Coomassie blue. (B) Mitochondrial protein purity profile. (C) Nonmitochondrial markers. The different fractions obtained during mitochondria isolation were loaded and incubated with antibodies against different proteins in specific subcellular fractions. Abbreviations: fraction N = non-homogenized tissue and nuclei; SN1 = supernatant number 1: cytoplasm + organelles; SN2 = supernatant number 2: cytoplasm + organelles; VDAC = voltage-dependent anion channel; TOMM20 = translocase of outer mitochondrial membrane 20; mtTFA = mitochondrial transcription factor A; TIMM23 = translocase of inner mitochondrial membrane 23; LDHA = lactate dehydrogenase A; HSP70 = heat shock protein 70; ER = endoplasmic reticulum. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/63336/63336fig03large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<img alt="Figure 4" class="xfigimg" src="/files/ftp_upload/63336/63336fig04.jpg" /> 
Figure 4: Representative results. Bioenergetic profiling of mitochondria isolated from hindlimb muscles of a 13-month-old male wild type C57BL/6N mouse. The injection points of the different substrates and inhibitors are indicated in each assay. The performance of the ETC and OXPHOS machinery can be analyzed using pyruvate and malate, or palmitoyl-L-carnitine and malate as substrates in the Coupling Assay (A) or &#946;-oxidation of FA assays (B), respectively. (C) The electron flow assay allows the study of individual mitochondrial complexes in the presence of pyruvate, malate, and FCCP; 10 &#181;g of mitochondria were plated per well. Results are displayed following the middle-point representation option to visualize results in an aggregated form. This is in contrast to the point-to-point option, which would enable the visualization of the 9 consecutive measurements usually performed during each measurement step. The type of visualization can be changed after completing the assay under the Kinetic line chart options in the analysis software. Abbreviations: FA = fatty acids; OCR = oxygen consumption rate; ADP = adenosine diphosphate; FCCP = carbonyl cyanide-p-trifluoromethoxyphenylhydrazone; RCR = respiratory control ratio; EFA = Electron Flow Assay; BOX = &#946;-oxidation of FA. <a href="https://www-jove-com.remotexs.ntu.edu.sg/files/ftp_upload/63336/63336fig04large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Coupling Assay</td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Port</td>
			<td>Inhibitor</td>
			<td>[Stock]</td>
			<td>[Injection Port]</td>
			<td>[Final]</td>
			<td>Recipe</td>
			<td></td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td>Inhib</td>
			<td>CAM-BSA</td>
		</tr>
		<tr>
			<td>A</td>
			<td>ADP</td>
			<td>100 mM</td>
			<td>50 mM</td>
			<td>5 mM</td>
			<td>650 &#956;L</td>
			<td>650 &#956;L</td>
		</tr>
		<tr>
			<td>B</td>
			<td>Oligomycin</td>
			<td>4 mM</td>
			<td>31.6 &#956;M</td>
			<td>3.16 &#956;M</td>
			<td>11.3 &#956;L</td>
			<td>1418.7 &#956;L</td>
		</tr>
		<tr>
			<td>C</td>
			<td>FCCP</td>
			<td>20 mM</td>
			<td>60 &#956;M</td>
			<td>6 &#956;M</td>
			<td>4.68 &#956;L</td>
			<td>1555.32 &#956;L</td>
		</tr>
		<tr>
			<td>D</td>
			<td>Antimycin A // Rotenone</td>
			<td>5 mM // 4 mM</td>
			<td>40 &#956;M // 50 &#956;M</td>
			<td>4 &#956;M // 5 &#956;M</td>
			<td>13.52 &#956;L // 21.12 &#956;L</td>
			<td>1655.36 &#956;L</td>
		</tr>
		<tr>
			<td>Electron Flow Assay</td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Port</td>
			<td>Inhibitor</td>
			<td>[Stock]</td>
			<td>[Injection Port]</td>
			<td>[Final]</td>
			<td>Recipe</td>
			<td></td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td>Inhib</td>
			<td>EFAM-BSA</td>
		</tr>
		<tr>
			<td>A</td>
			<td>Rotenone</td>
			<td>4 mM</td>
			<td>50 &#956;M</td>
			<td>5 &#956;M</td>
			<td>16.25 &#956;L</td>
			<td>1283.7 &#956;L</td>
		</tr>
		<tr>
			<td>B</td>
			<td>Succinate</td>
			<td>500 mM</td>
			<td>100 mM</td>
			<td>10 mM</td>
			<td>286 &#956;L</td>
			<td>1144 &#956;L</td>
		</tr>
		<tr>
			<td>C</td>
			<td>Antimycin A</td>
			<td>5mM</td>
			<td>4 &#956;M</td>
			<td>4 &#956;M</td>
			<td>12.48 &#956;L</td>
			<td>1547.5 &#956;L</td>
		</tr>
		<tr>
			<td>D</td>
			<td>Ascorbate // TMPD</td>
			<td>1 M // 50 mM</td>
			<td>100 mM // 1 mM</td>
			<td>10 mM // 100 &#956;M</td>
			<td>169 &#956;L // 33.8 &#956;L</td>
			<td>1487.2 &#956;L</td>
		</tr>
		<tr>
			<td>&#946;-Oxidation Assay</td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Port</td>
			<td>Inhibitor</td>
			<td>[Stock]</td>
			<td>[Injection Port]</td>
			<td>[Final]</td>
			<td>Recipe</td>
			<td></td>
		</tr>
		<tr>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td></td>
			<td>Inhib</td>
			<td>BOX-BSA</td>
		</tr>
		<tr>
			<td>A</td>
			<td>ADP</td>
			<td>100 mM</td>
			<td>40 mM</td>
			<td>4 mM</td>
			<td>520 &#956;L</td>
			<td>780 &#956;L</td>
		</tr>
		<tr>
			<td>B</td>
			<td>Oligomycin</td>
			<td>4 mM</td>
			<td>31.6 &#956;M</td>
			<td>3.16 &#956;M</td>
			<td>11.3 &#956;L</td>
			<td>1418.7 &#956;L</td>
		</tr>
		<tr>
			<td>C</td>
			<td>FCCP</td>
			<td>20 mM</td>
			<td>60 &#956;M</td>
			<td>6 &#956;M</td>
			<td>4.68 &#956;L</td>
			<td>1555.32 &#956;L</td>
		</tr>
		<tr>
			<td>D</td>
			<td>Antimycin A // Rotenone</td>
			<td>5 mM // 4 mM</td>
			<td>40 &#956;M // 20 &#956;M</td>
			<td>4 &#956;M // 2 &#956;M</td>
			<td>13.52 &#956;L // 8.45 &#956;L</td>
			<td>1668 &#956;L</td>
		</tr>
	</tbody>
</table>
Table 1: Preparation of inhibitor solutions for the different assays. The [Stock] column shows the concentrations of the stock solutions of the compound indicated in the Inhibitor column. [Injection Port] refers to the concentration of the inhibitor solutions to be loaded in the different ports of the cartridge, while the [Final] column indicates the final concentration of the inhibitors in the wells. Finally, the Recipe columns specify the volumes of stock inhibitor solutions and BSA-free media that must be mixed to prepare the solutions to be loaded in the injection ports.&#160;Abbreviations: ADP = adenosine diphosphate; FCCP = carbonyl cyanide-p-trifluoromethoxyphenylhydrazone; TMPD = N,N,N&#8242;,N&#8242;-tetramethyl-para-phenylene-diamine; Inhib = inhibitor; BSA = bovine serum albumin; CAM-BSA = BSA-free coupling assay medium; EFAM-BSA = BSA-free electron flow assay medium; BOX-BSA = BSA-free &#946;-oxidation of fatty acid assay medium.
<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Port</td>
			<td>Volume injected</td>
			<td>Stock prepared (26 wells)</td>
		</tr>
		<tr>
			<td>A</td>
			<td>50 &#956;L</td>
			<td>1300 &#956;L</td>
		</tr>
		<tr>
			<td>B</td>
			<td>55 &#956;L</td>
			<td>1430 &#956;L</td>
		</tr>
		<tr>
			<td>C</td>
			<td>60 &#956;L</td>
			<td>1560 &#956;L</td>
		</tr>
		<tr>
			<td>D</td>
			<td>65 &#956;L</td>
			<td>1690 &#956;L</td>
		</tr>
	</tbody>
</table>
Table 2: Calculation of injection volumes.
<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Action</td>
			<td>Time (minutes)</td>
			<td>Repetition</td>
			<td>Port</td>
		</tr>
		<tr>
			<td>Calibrate</td>
			<td>15-20</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Wait</td>
			<td>10</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Mix + Wait</td>
			<td>1 + 3</td>
			<td>&#215; 2</td>
			<td></td>
		</tr>
		<tr>
			<td>Mix</td>
			<td>1</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Measure + Mix</td>
			<td>3 + 1</td>
			<td>&#215; 2</td>
			<td></td>
		</tr>
		<tr>
			<td>Inject</td>
			<td></td>
			<td></td>
			<td>A</td>
		</tr>
		<tr>
			<td>Mix</td>
			<td>1</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Measure</td>
			<td>3</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Mix</td>
			<td>1</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Inject</td>
			<td></td>
			<td></td>
			<td>B</td>
		</tr>
		<tr>
			<td>Mix</td>
			<td>1</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Measure</td>
			<td>3</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Mix</td>
			<td>1</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Inject</td>
			<td></td>
			<td></td>
			<td>C</td>
		</tr>
		<tr>
			<td>Mix</td>
			<td>1</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Measure</td>
			<td>3</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Mix</td>
			<td>1</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Inject</td>
			<td></td>
			<td></td>
			<td>D</td>
		</tr>
		<tr>
			<td>Mix + Measure</td>
			<td>1 + 3</td>
			<td>&#215; 2</td>
			<td></td>
		</tr>
	</tbody>
</table>
Table 3: Protocol settings for the different assays.

Watch this Scientific Journal Video about Isolation of Mitochondria from Mouse Skeletal Muscle for Respirometric Assays at JoVE.com

Isolation of Mitochondria from Mouse Skeletal Muscle for Respirometric Assays

Here, we describe a detailed method for mitochondria isolation from mouse skeletal muscle and the subsequent analysis of respiration by Oxygen Consumption Rate (OCR) using microplate-based respirometric assays. This pipeline can be applied to study the effects of multiple environmental or genetic interventions on mitochondrial metabolism.

Most of the cell&#39;s energy is obtained through the degradation of glucose, fatty acids, and amino acids by different pathways that converge on the ...

isolation-mitochondria-from-mouse-skeletal-muscle-for-respirometric

Nanyang Technological University

Research

JoVE Journal

Biology

5.0K Views.  Universidad Pablo de Olavide. Dit woord beschrijft ademhalingsanalyse bij het verwerken van mitochondriën uit de skeletspieren van muizen. Dit protocol verkort de zuiveringstijd aanzienlijk en maakt het mogelijk om meerdere monsters tegelijkertijd te verwerken. Mitochondriën van dieren met een acht geslacht van Verenigde achtergrond kunnen worden verminkt met behulp van dit protocol dat de studie van ademhaling in een breed scala van experimentele omstandigheden mogelijk maakt.Deze methode is geschikt voor alle o...

Video: Isolation of Mitochondria from Mouse Skeletal Muscle for Respirometric Assays

Using Isolated Mitochondria from Minimal Quantities of Mouse Skeletal Muscle for High throughput Microplate Respiratory Measurements

Skeletal muscle mitochondria play a specific role in many disease pathologies. As such, the measurement of oxygen consumption as an indicator of mitochondrial function in this tissue has become more prevalent. Although many technologies and assays exist that measure mitochondrial respiratory pathways in a variety of cells, tissue and species, there is currently a void in the literature in regards to the compilation of these assays using isolated mitochondria from mouse skeletal muscle for use in microplate based technologies. Importantly, the use of microplate based respirometric assays is growing among mitochondrial biologists as it allows for high throughput measurements using minimal quantities of isolated mitochondria. Therefore, a collection of microplate based respirometric assays were developed that are able to assess mechanistic changes/adaptations in oxygen consumption in a commonly used animal model. The methods presented herein provide step-by-step instructions to perform these assays with an optimal amount of mitochondrial protein and reagents, and high precision as evidenced by the minimal variance across the dynamic range of each assay.

The methods presented provide step-by-step instructions for the performance of a collection of microplate based respirometric assays using isolated mitochondria from minimal quantities of mouse skeletal muscle. These assays are able to measure mechanistic changes/adaptations in mitochondrial oxygen consumption in a commonly used animal model.

Skeletal muscle mitochondria play a specific role in many disease pathologies. As such, the measurement of oxygen consumption as an indicator of ...

Developmental Biology

Measurement of Protein Import Capacity of Skeletal Muscle Mitochondria

Mitochondria are key metabolic and regulatory organelles that determine the energy supply as well as the overall health of the cell. In skeletal muscle, mitochondria exist in a series of complex morphologies, ranging from small oval organelles to a broad, reticulum-like network. Understanding how the mitochondrial reticulum expands and develops in response to diverse stimuli such as alterations in energy demand has long been a topic of research. A key aspect of this growth, or biogenesis, is the import of precursor proteins, originally encoded by the nuclear genome, synthesized in the cytosol, and translocated into various mitochondrial sub-compartments. Mitochondria have developed a sophisticated mechanism for this import process, involving many selective inner and outer membrane channels, known as the protein import machinery (PIM). Import into the mitochondrion is dependent on viable membrane potential and the availability of organelle-derived ATP through oxidative phosphorylation. Therefore its measurement can serve as a measure of organelle health. The PIM also exhibits a high level of adaptive plasticity in skeletal muscle that is tightly coupled to the energy status of the cell. For example, exercise training has been shown to increase import capacity, while muscle disuse reduces it, coincident with changes in markers of mitochondrial content. Although protein import is a critical step in the biogenesis and expansion of mitochondria, the process is not widely studied in skeletal muscle. Thus, this paper outlines how to use isolated and fully functional mitochondria from skeletal muscle to measure protein import capacity in order to promote a greater understanding of the methods involved and an appreciation of the importance of the pathway for organelle turnover in exercise, health, and disease.

Mitochondria are key metabolic organelles that exhibit a high level of phenotypic plasticity in skeletal muscle. The import of proteins from the cytosol is a critical pathway for organelle biogenesis, essential for the expansion of the reticulum and the maintenance of mitochondrial function. Therefore, protein import serves as a barometer of cellular health.

Mitochondria are key metabolic and regulatory organelles that determine the energy supply as well as the overall health of the cell. In skeletal muscle, ...

Biochemistry

Preparation and Respirometric Assessment of Mitochondria Isolated from Skeletal Muscle Tissue Obtained by Percutaneous Needle Biopsy

Respirometric profiling of isolated mitochondria is commonly used to investigate electron transport chain function. We describe a method for obtaining samples of human Vastus lateralis, isolating mitochondria from minimal amounts of skeletal muscle tissue, and plate based respirometric profiling using an extracellular flux (XF) analyzer. Comparison of respirometric profiles obtained using 1.0, 2.5 and 5.0 &#956;g of mitochondria indicate that 1.0 &#956;g is sufficient to measure respiration and that 5.0 &#956;g provides most consistent results based on comparison of standard errors. Western blot analysis of isolated mitochondria for mitochondrial marker COX IV and non-mitochondrial tissue marker GAPDH indicate that there is limited non-mitochondrial contamination using this protocol. The ability to study mitochondrial respirometry in as little as 20 mg of muscle tissue allows users to utilize individual biopsies for multiple study endpoints in clinical research projects.

Methods for biopsy of Vastus lateralis, preparation of purified mitochondria, and respirometric profiling are described. The use of small muscle volume makes this technique suitable for clinical research applications.

Respirometric profiling of isolated mitochondria is commonly used to investigate electron transport chain function. We describe a method for obtaining ...

Medicine

Adult and Embryonic Skeletal Muscle Microexplant Culture and Isolation of Skeletal Muscle Stem Cells

Cultured embryonic and adult skeletal muscle cells have a number of different uses. The micro-dissected explants technique described in this chapter is a robust and reliable method for isolating relatively large numbers of proliferative skeletal muscle cells from juvenile, adult or embryonic muscles as a source of skeletal muscle stem cells. The authors have used micro-dissected explant cultures to analyse the growth characteristics of skeletal muscle cells in wild-type and dystrophic muscles. Each of the components of tissue growth, namely cell survival, proliferation, senescence and differentiation can be analysed separately using the methods described here. The net effect of all components of growth can be established by means of measuring explant outgrowth rates. The micro-explant method can be used to establish primary cultures from a wide range of different muscle types and ages and, as described here, has been adapted by the authors to enable the isolation of embryonic skeletal muscle precursors.
Uniquely, micro-explant cultures have been used to derive clonal (single cell origin) skeletal muscle stem cell (SMSc) lines which can be expanded and used for in vivo transplantation. In vivo transplanted SMSc behave as functional, tissue-specific, satellite cells which contribute to skeletal muscle fibre regeneration but which are also retained (in the satellite cell niche) as a small pool of undifferentiated stem cells which can be re-isolated into culture using the micro-explant method.

The micro-dissected explants technique is a robust and reliable method for isolating proliferative skeletal muscle cells from juvenile, adult or embryonic muscles as a source of skeletal muscle stem cells. Uniquely, these cells have been clonally derived to produce skeletal muscle stem cell lines used for in vivo transplantation.

Cultured embryonic and adult skeletal muscle cells have a number of different uses. The micro-dissected explants technique described in this chapter is a ...

Mitochondrial Isolation from Skeletal Muscle

Mitochondria are organelles controlling the life and death of the cell. They participate in key metabolic reactions, synthesize most of the ATP, and regulate a number of signaling cascades2,3. Past and current researchers have isolated mitochondria from rat and mice tissues such as liver, brain and heart4,5. In recent years, many researchers have focused on studying mitochondrial function from skeletal muscles.
Here, we describe a method that we have used successfully for the isolation of mitochondria from skeletal muscles 6. Our procedure requires that all buffers and reagents are made fresh and need about 250-500 mg of skeletal muscle. We studied mitochondria isolated from rat and mouse gastrocnemius and diaphragm, and rat extraocular muscles. Mitochondrial protein concentration is measured with the Bradford assay. It is important that mitochondrial samples be kept ice-cold during preparation and that functional studies be performed within a relatively short time (~1 hr). Mitochondrial respiration is measured using polarography with a Clark-type electrode (Oxygraph system) at 37&deg;C7. Calibration of the oxygen electrode is a key step in this protocol and it must be performed daily. Isolated mitochondria (150 &mu;g) are added to 0.5 ml of experimental buffer (EB). State 2 respiration starts with addition of glutamate (5mM) and malate (2.5 mM). Then, adenosine diphosphate (ADP) (150 &mu;M) is added to start state 3. Oligomycin (1 &mu;M), an ATPase synthase blocker, is used to estimate state 4. Lastly, carbonyl cyanide p-[trifluoromethoxy]-phenyl-hydrazone (FCCP, 0.2 &mu;M) is added to measurestate 5, or uncoupled respiration 6. The respiratory control ratio (RCR), the ratio of state 3 to state 4, is calculated after each experiment. An RCR &ge;4 is considered as evidence of a viable mitochondria preparation.
In summary, we present a method for the isolation of viable mitochondria from skeletal muscles that can be used in biochemical (e.g., enzyme activity, immunodetection, proteomics) and functional studies (mitochondrial respiration).

This protocol describes a procedure to study the respiration of mitochondria isolated from skeletal muscles. This method was adapted from Scorrano et al. (2007). The mitochondrial isolation procedure requires about 2 hours. The mitochondrial respiration can be completed in about 1 hour.

Mitochondria are organelles controlling the life and death of the cell. They participate in key metabolic reactions, synthesize most of the ATP, and ...

Purification of Progenitors from Skeletal Muscle

Skeletal muscle contains multiple progenitor populations of distinct embryonic origins and developmental potential. Myogenic progenitors, usually residing in a "satellite cell position" between the myofiber plasma membrane and the laminin-rich basement membrane that ensheaths it, are self-renewing cells that are solely committed to the myogenic lineage1,2. We have recently described a second class of vessel associated progenitors that can generate myofibroblasts and white adipocytes, which responds to damage by efficiently entering proliferation and provides trophic support to myogenic cells during tissue regeneration3,4. One of the most trusted assays to determine the developmental and regenerative potential of a given cell population relies on their isolation and transplantation5-7. To this end we have optimized protocols for their purification by flow cytometry from enzymatically dissociated muscle, which we will outline in this article. The populations obtained using this method will contain either myogenic or fibro/adipogenic colony forming cells: no other cell types are capable of expanding in vitro or surviving in vivo delivery. However, when these populations are used immediately after the sort for molecular analysis (e.g qRT-PCR) one must keep in mind that the freshly sorted subsets may contain other contaminant cells that lack the ability of forming colonies or engrafting recipients.

Method for the enzymatic dissociation, surface labeling and purification by flow cytometry of fibro/adipogenic and myogenic progenitors from murine skeletal muscle.

Skeletal muscle contains multiple progenitor populations of distinct embryonic origins and developmental potential. Myogenic progenitors, usually residing ...

Laser-inflicted Injury of Zebrafish Embryonic Skeletal Muscle

Various experimental approaches have been used in mouse to induce muscle injury with the aim to study muscle regeneration, including myotoxin injections (bupivacaine, cardiotoxin or notexin), muscle transplantations (denervation-devascularization induced regeneration), intensive exercise, but also murine muscular dystrophy models such as the mdx mouse (for a review of these approaches see 1). In zebrafish, genetic approaches include mutants that exhibit muscular dystrophy phenotypes (such as runzel2 or sapje3) and antisense oligonucleotide morpholinos that block the expression of dystrophy-associated genes4. Besides, chemical approaches are also possible, e.g. with Galanthamine, a chemical compound inhibiting acetylcholinesterase, thereby resulting in hypercontraction, which eventually leads to muscular dystrophy5. However, genetic and pharmacological approaches generally affect all muscles within an individual, whereas the extent of physically inflicted injuries are more easily controlled spatially and temporally1. Localized physical injury allows the assessment of contralateral muscle as an internal control. Indeed, we recently used laser-mediated cell ablation to study skeletal muscle regeneration in the zebrafish embryo6, while another group recently reported the use of a two-photon laser (822 nm) to damage very locally the plasma membrane of individual embryonic zebrafish muscle cells7.
Here, we report a method for using the micropoint laser (Andor Technology) for skeletal muscle cell injury in the zebrafish embryo. The micropoint laser is a high energy laser which is suitable for targeted cell ablation at a wavelength of 435 nm. The laser is connected to a microscope (in our setup, an optical microscope from Zeiss) in such a way that the microscope can be used at the same time for focusing the laser light onto the sample and for visualizing the effects of the wounding (brightfield or fluorescence). The parameters for controlling laser pulses include wavelength, intensity, and number of pulses.
Due to its transparency and external embryonic development, the zebrafish embryo is highly amenable for both laser-induced injury and for studying the subsequent recovery. Between 1 and 2 days post-fertilization, somitic skeletal muscle cells progressively undergo maturation from anterior to posterior due to the progression of somitogenesis from the trunk to the tail8, 9. At these stages, embryos spontaneously twitch and initiate swimming. The zebrafish has recently been recognized as an important vertebrate model organism for the study of tissue regeneration, as many types of tissues (cardiac, neuronal, vascular etc.) can be regenerated after injury in the adult zebrafish10, 11.

The method presented here comprises the precise injury of live zebrafish embryos with high-energy laser pulses and the subsequent analysis of these injuries and their recovery with time. We also show how genetically labeled single or groups of skeletal muscle cells can be tracked during and after laser light induced damage.

Various experimental approaches have been used in mouse to induce muscle injury with the aim to study muscle regeneration, including myotoxin injections ...

Isolation and Functional Analysis of Mitochondria from Cultured Cells and Mouse Tissue

Comparison between two or more distinct groups, such as healthy vs. disease, is necessary to determine cellular status. Mitochondria are at the nexus of cell heath due to their role in both cell metabolism and energy production as well as control of apoptosis. Therefore, direct evaluation of isolated mitochondria and mitochondrial perturbation offers the ability to determine if organelle-specific (dys)function is occurring. The methods described in this protocol include isolation of intact, functional mitochondria from HEK cultured cells and mouse liver and spinal cord, but can be easily adapted for use with other cultured cells or animal tissues. Mitochondrial function assessed by TMRE and the use of common mitochondrial uncouplers and inhibitors in conjunction with a fluorescent plate reader allow this protocol not only to be versatile and accessible to most research laboratories, but also offers high throughput.

Comparison of mitochondrial membrane potential between samples yields valuable information about cellular status. Detailed steps for isolating mitochondria and assessing response to inhibitors and uncouplers using fluorescence are described. The method and utility of this protocol are illustrated by use of a cell culture and animal model of cellular stress.

Comparison between two or more distinct groups, such as healthy vs. disease, is necessary to determine cellular status. Mitochondria are at the nexus of ...

Isolation of Mitochondria from Minimal Quantities of Mouse Skeletal Muscle for High Throughput Microplate Respiratory Measurements

Dysfunctional skeletal muscle mitochondria play a role in altered metabolism observed with aging, obesity and Type II diabetes. Mitochondrial respirometric assays from isolated mitochondrial preparations allow for the assessment of mitochondrial function, as well as determination of the mechanism(s) of action of drugs and proteins that modulate metabolism. Current isolation procedures often require large quantities of tissue to yield high quality mitochondria necessary for respirometric assays. The methods presented herein describe how high quality purified mitochondria (~ 450 &#181;g) can be isolated from minimal quantities (~75-100 mg) of mouse skeletal muscle for use in high throughput respiratory measurements. We determined that our isolation method yields 92.5&#177; 2.0% intact mitochondria by measuring citrate synthase activity spectrophotometrically. In addition, Western blot analysis in isolated mitochondria resulted in the faint expression of the cytosolic protein, GAPDH, and the robust expression of the mitochondrial protein, COXIV. The absence of a prominent GAPDH band in the isolated mitochondria is indicative of little contamination from non-mitochondrial sources during the isolation procedure. Most importantly, the measurement of O2 consumption rate with micro-plate based technology and determining the respiratory control ratio (RCR) for coupled respirometric assays shows highly coupled (RCR; &#62;6 for all assays) and functional mitochondria. In conclusion, the addition of a separate mincing step and significantly reducing motor driven homogenization speed of a previously reported method has allowed the isolation of high quality and purified mitochondria from smaller quantities of mouse skeletal muscle that results in highly coupled mitochondria that respire with high function during microplate based respirometirc assays.

Here, we present a modification of a previously reported method that allows for the isolation of high quality and purified mitochondria from smaller quantities of mouse skeletal muscle. This procedure results in highly coupled mitochondria that respire with high function during microplate based respirometirc assays.

Dysfunctional skeletal muscle mitochondria play a role in altered metabolism observed with aging, obesity and Type II diabetes. Mitochondrial ...

Isolation of Intact Mitochondria from Skeletal Muscle by Differential Centrifugation for High-resolution Respirometry Measurements

Mitochondria are involved in cellular energy metabolism and use oxygen to produce energy in the form of adenosine triphosphate (ATP). Differential centrifugation at low- and high-speed is commonly used to isolate mitochondria from tissues and cultured cells. Crude mitochondrial fractions obtained by differential centrifugation are used for respirometry measurements. The differential centrifugation technique is based on the separation of organelles according to their size and sedimentation velocity. The isolation of mitochondria is performed immediately after tissue harvesting. The tissue is immersed in an ice-cold homogenization medium, minced using scissors and homogenized in a glass homogenizer with a loose-fitting pestle. The differential centrifugation technique is efficient, fast and inexpensive and the mitochondria obtained by differential centrifugation are pure enough for respirometry assays. Some of the limitations and disadvantages of isolated mitochondria, based on differential centrifugation, are that the mitochondria can be damaged during the homogenization and isolation procedure and that large amounts of the tissue biopsy or cultured cells are required for the mitochondrial isolation.

Here, a quadriceps muscle specimen is taken from an anaesthetized pig and mitochondria are isolated by differential centrifugation. Then, the respiratory rates of mitochondrial respiratory chain complexes I, II and IV are determined using high-resolution respirometry.

Isolation of Mitochondria from Mouse Skeletal Muscle for Respirometric Assays

Samenvatting

Meer video's verkennen