Name: tracking rats in operant conditioning chambers using a versatile homemade video camera and deeplabcut
Uploaded: 2020-06-15T14:30:00.000+00:00
Duration: 8 min 32 s
Description: Watch this Scientific Journal Video about Tracking Rats in Operant Conditioning Chambers Using a Versatile Homemade Video Camera and DeepLabCut at JoVE.com

This work was supported by grants from the Swedish Brain Foundation, the Swedish Parkinson Foundation, and the Swedish Government Funds for Clinical Research (M.A.C.), as well as the Wenner-Gren foundations (M.A.C, E.K.H.C), &#197;hl&#233;n foundation (M.A.C) and the foundation Blanceflor Boncompagni Ludovisi, n&#233;e Bildt (S.F).

All procedures that include animal handling have been approved by the Malm&#246;-Lund Ethical committee for animal research.
1. Building the video camera
NOTE: A list of the components needed for building the camera is provided in the Table of Materials. Also refer to Figure 1, Figure 2, Figure 3, Figure 4, Figure 5.
<ol>
	<li>Attach the magnetic metal ring (that accompanies the fisheye lens package) around the opening of the camera stand (Figure 2A). This will allow the fisheye lens to be placed in front of the camera.</li>
	<li>Attach the camera module to the camera stand (Figure 2B). This will give some stability to the camera module and offer some protection to the electronic circuits.</li>
	<li>Open the camera ports on the camera module and microcomputer (Figure 1) by gently pulling on the edges of their plastic clips (Figure 2C).</li>
	<li>Place the ribbon cable in the camera ports, so that the silver connectors face the circuit boards (Figure2C). Lock the cable in place by pushing in the plastic clips of the camera ports.</li>
	<li>Place the microcomputer in the plastic case and insert the listed micro SD card (Figure 2D). 
	NOTE: The micro SD card will function as the microcomputer&#8217;s hard drive and contains a full operating system. The listed micro SD card comes with an installation manager preinstalled on it (New Out Of Box Software (NOOBS). As an alternative, one can write an image of the latest version of the microcomputer&#8217;s operating system (Raspbian or Rasberry Pi OS) to a generic micro SD card. For aid with this, please refer to official web resources18. It is preferable to use a class 10 micro SD card with 32 Gb of storage space. Larger SD cards might not be fully compatible with the listed microcomputer.</li>
	<li>Connect a monitor, keyboard and a mouse to the microcomputer, and then connect its power supply.</li>
	<li>Follow the steps as prompted by the installation guide to perform a full installation of the microcomputer&#8217;s operating system (Raspbian&#160;or Rasberry Pi OS). When the microcomputer has booted, ensure that it is connected to internet either through an ethernet cable or Wi-Fi.</li>
	<li>Follow the steps outlined below to update the microcomputer&#8217;s preinstalled software packages.
	<ol>
		<li>Open a terminal window (Figure 3A).</li>
		<li>Type &#8220;sudo apt-get update&#8221; (excluding quotation marks) and press the Enter key (Figure 3B). Wait for the process to finish.</li>
		<li>Type &#8220;sudo apt full-upgrade&#8221; (excluding quotation marks) and press enter. Make button responses when prompted and wait for the process to finish.</li>
	</ol>
	</li>
	<li>Under the Start menu, select Preferences and Raspberry Pi configurations (Figure 3C). In the opened window, go to the Interfaces tab and click to Enable the Camera and I2C. This is required for having the microcomputer work with the camera and IR LED modules.</li>
	<li>Rename Supplementary File 1 to &#8220;Pi_video_camera_Clemensson_2019.py&#8221;. Copy it onto a USB memory stick, and subsequently into the microcomputer&#8217;s /home/pi folder (Figure 3D). This file is a Python script, which enables video recordings to be made with the button switches that are attached in step 1.13.</li>
	<li>Follow the steps outlined below to edit the microcomputer&#8217;s rc.local file. This makes the computer start the script copied in step 1.10 and start the IR LEDs attached in step 1.13 when it boots. 
	CAUTION: This auto-start feature does not reliably work with microcomputer boards other than the listed model.
	<ol>
		<li>Open a terminal window, type &#8220;sudo nano /etc/rc.local&#8221; (excluding quotation marks) and press enter. This opens a text file (Figure 4A).</li>
		<li>Use the keyboard&#8217;s arrow keys to move the cursor down to the space between &#8220;fi&#8221; and &#8220;exit 0&#8221; (Figure 4A).</li>
		<li>Add the following text as shown in Figure 4B, writing each string of text on a new line: 
		sudo i2cset -y 1 0x70 0x00 0xa5 &#38; 
		sudo i2cset -y 1 0x70 0x09 0x0f &#38; 
		sudo i2cset -y 1 0x70 0x01 0x32 &#38; 
		sudo i2cset -y 1 0x70 0x03 0x32 &#38; 
		sudo i2cset -y 1 0x70 0x06 0x32 &#38; 
		sudo i2cset -y 1 0x70 0x08 0x32 &#38; 
		sudo python /home/pi/Pi_video_camera_Clemensson_2019.py &#38;</li>
		<li>Save the changes by pressing Ctrl + x followed by y and Enter.</li>
	</ol>
	</li>
	<li>Solder together the necessary components as indicated in Figure 5A, and as described below.
	<ol>
		<li>For the two colored LEDs, attach a resistor and a female jumper cable to one leg, and a female jumper cable to the other (Figure 5A). Try to keep the cables as short as possible. Take note of which of the LED&#8217;s electrodes is the negative one (typically the short one), as this needs to be connected to ground on the microcomputer&#8217;s general-purpose input/output (GPIO) pins.</li>
		<li>For the two button switches, attach a female jumper cable to each leg (Figure 5A). Make the cables long for one of the switches, and short for the other.</li>
		<li>To assemble the IR LED module, follow instructions available on its official web resources19.</li>
		<li>Cover the soldered joints with shrink tubing to limit the risk of short-circuiting the components.</li>
	</ol>
	</li>
	<li>Switch off the microcomputer and connect the switches and LEDs to its GPIO pins as indicated in Figure 5B, and described below. 
	CAUTION: Wiring the components to the wrong GPIO pins could damage them and/or the microcomputer when the camera is switched on.
	<ol>
		<li>Connect one LED so that its negative end connects to pin #14 and its positive end connects to pin #12. This LED will shine when the microcomputer has booted and the camera is ready to be used.</li>
		<li>Connect the button switch with long cables so that one cable connects to pin #9 and the other one to pin #11. This button is used to start and stop the video recordings. 
		NOTE: The script that controls the camera has been written so that this button is unresponsive for a few seconds just after starting or stopping a video recording.</li>
		<li>Connect one LED so that its negative end connects to pin #20 and its positive end connects to pin #13. This LED will shine when the camera is recording a video.</li>
		<li>Connect the button switch with the short cables so that one cable connects to pin #37 and the other one to pin #39. This switch is used to switch off the camera.</li>
		<li>Connect the IR LED module as described in its official web resources19.</li>
	</ol>
	</li>
</ol>
2. Designing the operant conditioning protocol of interest
NOTE: To use DeepLabCut for tracking the protocol progression in videos recorded from operant chambers, the behavioral protocols need to be structured in specific ways, as explained below.
<ol>
	<li>Set the protocol to use the chamber&#8217;s house light, or another strong light signal, as an indicator of a specific step in the protocol (such as the start of individual trials, or the test session) (Figure 6A). This signal will be referred to as the &#8220;protocol step indicator&#8221; in the remainder of this protocol. The presence of this signal will allow tracking protocol progression in the recorded videos.</li>
	<li>Set the protocol to record all responses of interest with individual timestamps in relation to when the protocol step indicator becomes active.</li>
</ol>
3. Recording videos of animals performing the behavioral test of interest
<ol>
	<li>Place the camera on top of the operant chambers, so that it records a top view of the area inside (Figure 7). 
	NOTE: This is particularly suitable for capturing an animals&#8217; general position and posture inside the chamber. Avoid placing the camera&#8217;s indicator lights and the IR LED module close to the camera lens.</li>
	<li>Start the camera by connecting it to an electrical outlet via the power supply cable. 
	NOTE: Prior to first use, it is beneficial to set the focus of the camera, using the small tool that accompanies the camera module.</li>
	<li>Use the button connected in step 1.13.2 to start and stop video recordings.</li>
	<li>Switch off the camera by following these steps.
	<ol>
		<li>Push and hold the button connected in step 1.13.4 until the LED connected in step 1.13.1 switches off. This initiates the camera&#8217;s shut down process.</li>
		<li>Wait until the green LED visible on top of the microcomputer (Figure 1) has stopped blinking.</li>
		<li>Remove the camera&#8217;s power supply. 
		CAUTION: Unplugging the power supply while the microcomputer is still running can cause corruption of the data on the micro SD card.</li>
	</ol>
	</li>
	<li>Connect the camera to a monitor, keyboard, mouse and USB storage device and retrieve the video files from its desktop. 
	NOTE: The files are named according to the date and time when video recording was started. However, the microcomputer does not have an internal clock and only updates its time setting when connected to the internet.</li>
	<li>Convert the recorded videos from .h264 to .MP4, as the latter works well with DeepLabCut and most media players. 
	NOTE: There are multiple ways to achieve this. One is described in Supplementary File 2.</li>
</ol>
4. Analyzing videos with DeepLabCut
NOTE: DeepLabCut is a software package that allows users to define any object of interest in a set of video frames, and subsequently use these to train a neural network in tracking the objects&#8217; positions in full-length videos15,16. This section gives a rough outline for how to use DeepLabCut to track the status of the protocol step indicator and the position of a rat&#8217;s head. Installation and use of DeepLabCut is well-described in other published protocols15,16. Each step can be done through specific Python commands or DeepLabCut&#8217;s graphic user interface, as described elsewhere15,16.
<ol>
	<li>Create and configure a new DeepLabCut project by following the steps outlined in16.</li>
	<li>Use DeepLabCut&#8217;s frame grabbing function to extract 700&#8210;900 video frames from one or more of the videos recorded in section 3. 
	NOTE: If the animals differ considerably in fur pigmentation or other visual characteristics, it is advisable that the 700&#8210;900 extracted video frames are split across videos of different animals. Through this, one trained network can be used to track different individuals.
	<ol>
		<li>Make sure to include video frames that display both the active (Figure 8A) and inactive (Figure 8B) state of the protocol step indicator.</li>
		<li>Make sure to include video frames that cover the range of different positions, postures and head movements that the rat may show during the test. This should include video frames where the rat is standing still in different areas of the chamber, with its head pointing in different directions, as well as video frames where the rat is actively moving, entering nose poke openings and entering the pellet trough.</li>
	</ol>
	</li>
	<li>Use DeepLabCut&#8217;s Labeling Toolbox to manually mark the position of the rat&#8217;s head in each video frame extracted in step 4.2. Use the mouse cursor to place a &#8220;head&#8221; label in a central position between the rat&#8217;s ears (Figure 8A,B). In addition, mark the position of the chamber&#8217;s house light (or other protocol step indicator) in each video frame where it is actively shining (Figure 8A). Leave the house light unlabeled in frames where it is inactive (Figure 8B).</li>
	<li>Use DeepLabCut&#8217;s &#8220;create training data set&#8221; and &#8220;train network&#8221; functions to create a training data set from the video frames labeled in step 4.3 and start the training of a neural network. Make sure to select &#8220;resnet_101&#8221; for the chosen network type.</li>
	<li>Stop the training of the network when the training loss has plateaued below 0.01. This may take up to 500,000 training iterations. 
	NOTE: When using a GPU machine with approximately 8 GB of memory and a training set of about 900 video frames (resolution: 1640 x 1232 pixels), the training process has been found to take approximately 72 h.</li>
	<li>Use DeepLabCut&#8217;s video analysis function to analyze videos gathered in step 3, using the neural network trained in step 4.4. This will provide a .csv file listing the tracked positions of the rat&#8217;s head and the protocol step indicator in each video frame of the analyzed videos. In addition, it will create marked-up video files where the tracked positions are displayed visually (Videos 1-8).</li>
	<li>Evaluate the accuracy of the tracking by following the steps outlined below.
	<ol>
		<li>Use DeepLabCut&#8217;s built-in evaluate function to obtain an automated evaluation of the network&#8217;s tracking accuracy. This is based on the video frames that were labeled in step 4.3 and describes how far away on average the position tracked by the network is from the manually placed label.</li>
		<li>Select one or more brief video sequences (of about 100&#8210;200 video frames each) in the marked-up videos obtained in step 4.6. Go through the video sequences, frame by frame, and note in how many frames the labels correctly indicate the positions of the rat&#8217;s head, tail, etc., and in how many frames the labels are placed in erroneous positions or not shown.
		<ol>
			<li>If the label of a body part or object is frequently lost or placed in an erroneous position, identify the situations where tracking fails. Extract and add labeled frames of these occasions by repeating steps 4.2. and 4.3. Then retrain the network and reanalyze the videos by repeating steps 4.4-4.7. Ultimately, tracking accuracy of &#62;90% accuracy should be achieved.</li>
		</ol>
		</li>
	</ol>
	</li>
</ol>
5. Obtaining coordinates for points of interest in the operant chambers
<ol>
	<li>Use DeepLabCut as described in step 4.3 to manually mark points of interest in the operant chambers (such as nose poke openings, levers, etc.) in a single video frame (Figure 8C). These are manually chosen depending on study-specific interests, although the position of the protocol step indicator should always be included.</li>
	<li>Retrieve the coordinates of the marked points of interest from the .csv file that DeepLabCut automatically stores under &#8220;labelled data&#8221; in the project folder.</li>
</ol>
6. Identifying video segments where the protocol step indicator is active
<ol>
	<li>Load the .csv files obtained from the DeepLabCut video analysis in step 4.6 into a data management software of choice. 
	NOTE: Due to the amount and complexity of data obtained from DeepLabCut and operant conditioning systems, the data management is best done through automated analysis scripts. To get started with this, please refer to entry-level guides available elsewhere20,21,22.</li>
	<li>Note in which video segments the protocol step indicator is tracked within 60&#160;pixels of the position obtained in section 5. These will be periods where the protocol step indicator is active (Figure 6B). 
	NOTE: During video segments where the protocol step indicator is not shining, the marked-up video might seem to indicate that DeepLabCut is not tracking it to any position. However, this is rarely the case, and it is instead typically tracked to multiple scattered locations.</li>
	<li>Extract the exact starting point for each period where the protocol step indicator is active (Figure 6C: 1).</li>
</ol>
7. Identifying video segments of interest
<ol>
	<li>Consider the points where the protocol step indicator becomes active (Figure 6C: 1) and the timestamps of responses recorded by the operant chambers (section 2, Figure 6C: 2).</li>
	<li>Use this information to determine which video segments cover specific interesting events, such as inter-trial intervals, responses, reward retrievals etc. (Figure 6C: 3, Figure 6D). 
	NOTE: For this, keep in mind that the camera described herein records videos at 30 fps.</li>
	<li>Note the specific video frames that cover these events of interest.</li>
	<li>(Optional) Edit video files of full test sessions to include only the specific segments of interest. 
	NOTE: There are multiple ways to achieve this. One is described in Supplementary File 2 and 3. This greatly helps when storing large numbers of videos and can also make reviewing and presenting results more convenient.</li>
</ol>
8. Analyzing the position and movements of an animal during specific video segments
<ol>
	<li>Subset the full tracking data of head position obtained from DeepLabCut in step 4.6 to only include video segments noted under section 7.</li>
	<li>Calculate the position of the animal&#8217;s head in relation to one or more of the reference points selected under section 5 (Figure 8C). This enables comparisons of tracking and position across different videos.</li>
	<li>Perform relevant in-depth analysis of the animal&#8217;s position and movements. 
	NOTE: The specific analysis performed will be strongly study-specific. Some examples of parameters that can be analyzed are given below.
	<ol>
		<li>Visualize path traces by plotting all coordinates detected during a selected period within one graph.</li>
		<li>Analyze proximity to a given point of interest by using the following formula: 
		<img alt="Equation 1" src="/files/ftp_upload/61409/61409equ01.jpg" /></li>
		<li>Analyze changes in speed during a movement by calculating the distance between tracked coordinates in consecutive frames and divide by 1/fps of the camera.</li>
	</ol>
	</li>
</ol>

<ol>
	<li>Pritchett, K., Mulder, G. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Operant+conditioning.">Operant conditioning.</a> Contemporary Topics in Laboratory Animal Science. 43 (4), (2004).</li><li>Clemensson, E. K. H., Novati, A., Clemensson, L. E., Riess, O., Nguyen, H. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+BACHD+rat+model+of+Huntington+disease+shows+slowed+learning+in+a+Go/No-Go-like+test+of+visual+discrimination.">The BACHD rat model of Huntington disease shows slowed learning in a Go/No-Go-like test of visual discrimination.</a> Behavioural Brain Research. 359, 116-126 (2019).</li><li>Asinof, S. K., Paine, T. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+5-choice+serial+reaction+time+task:+a+task+of+attention+and+impulse+control+for+rodents.">The 5-choice serial reaction time task: a task of attention and impulse control for rodents.</a> Journal of Visualized Experiments. (90), e51574 (2014).</li><li>Coulbourn instruments. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Graphic+State:+Graphic+State+4+user's+manual.">Graphic State: Graphic State 4 user's manual.</a> Coulbourn instruments. , 12-17 (2013).</li><li>Med Associates Inc. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Med-PC+IV:+Med-PC+IV+programmer's+manual.">Med-PC IV: Med-PC IV programmer's manual.</a> Med Associates Inc. , 21-44 (2006).</li><li>Clemensson, E. K. H., Clemensson, L. E., Riess, O., Nguyen, H. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+BACHD+rat+model+of+Huntingon+disease+shows+signs+of+fronto-striatal+dysfunction+in+two+operant+conditioning+tests+of+short-term+memory.">The BACHD rat model of Huntingon disease shows signs of fronto-striatal dysfunction in two operant conditioning tests of short-term memory.</a> PloS One. 12 (1), (2017).</li><li>Herremans, A. H. J., Hijzen, T. H., Welborn, P. F. E., Olivier, B., Slangen, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+infusion+of+cholinergic+drugs+into+the+prefrontal+cortex+area+on+delayed+matching+to+position+performance+in+the+rat.">Effect of infusion of cholinergic drugs into the prefrontal cortex area on delayed matching to position performance in the rat.</a> Brain Research. 711 (1-2), 102-111 (1996).</li><li>Chudasama, Y., Muir, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+behavioral+analysis+of+the+delayed+non-matching+to+position+task:+the+effects+of+scopolamine,+lesions+of+the+fornix+and+of+the+prelimbic+region+on+mediating+behaviours+by+rats.">A behavioral analysis of the delayed non-matching to position task: the effects of scopolamine, lesions of the fornix and of the prelimbic region on mediating behaviours by rats.</a> Psychopharmacology. 134 (1), 73-82 (1997).</li><li>Talpos, J. C., McTighe, S. M., Dias, R., Saksida, L. M., Bussey, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Trial-unique,+delayed+nonmatching-to-location+(TUNL):+A+novel,+highly+hippocampus-dependent+automated+touchscreen+test+of+location+memory+and+pattern+separation.">Trial-unique, delayed nonmatching-to-location (TUNL): A novel, highly hippocampus-dependent automated touchscreen test of location memory and pattern separation.</a> Neurobiology of Learning and Memory. 94 (3), 341 (2010).</li><li>Rayburn-Reeves, R. M., Moore, M. K., Smith, T. E., Crafton, D. A., Marden, K. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spatial+midsession+reversal+learning+in+rats:+Effects+of+egocentric+cue+use+and+memory.">Spatial midsession reversal learning in rats: Effects of egocentric cue use and memory.</a> Behavioural Processes. 152, 10-17 (2018).</li><li>Gallo, A., Duchatelle, E., Elkhessaimi, A., Le Pape, G., Desportes, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Topographic+analysis+of+the+rat's+behavior+in+the+Skinner+box.">Topographic analysis of the rat's behavior in the Skinner box.</a> Behavioural Processes. 33 (3), 318-328 (1995).</li><li>Iversen, I. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Response-initiated+imaging+of+operant+behavior+using+a+digital+camera.">Response-initiated imaging of operant behavior using a digital camera.</a> Journal of the Experimental Analysis of Behavior. 77 (3), 283-300 (2002).</li><li>Med Associates Inc. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Video+monitor:+Video+monitor+SOF-842+user's+manual.">Video monitor: Video monitor SOF-842 user's manual.</a> Med Associates Inc. , 26-30 (2004).</li><li>. Coulbourn Instruments Available from: <a target="_blank" href="https://www.coulbourn.com/product_p/h39-16.htm">https://www.coulbourn.com/product_p/h39-16.htm</a> (2020)</li><li>Mathis, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DeepLabCut:+markerless+pose+estimation+of+user-defined+body+parts+with+deep+learning.">DeepLabCut: markerless pose estimation of user-defined body parts with deep learning.</a> Nature Neuroscience. 21 (9), 1281-1289 (2018).</li><li>Nath, T., Mathis, A., Chen, A. C., Patel, A., Bethge, M., Mathis, M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Using+DeepLabCut+for+3D+markerless+pose+estimation+across+species+and+behaviors.">Using DeepLabCut for 3D markerless pose estimation across species and behaviors.</a> Nature Protocols. 14 (7), 2152-2176 (2019).</li><li>Bari, A., Dalley, J. W., Robbins, T. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+application+of+the+5-chopice+serial+reaction+time+task+for+the+assessment+of+visual+attentional+processes+and+impulse+control+in+rats.">The application of the 5-chopice serial reaction time task for the assessment of visual attentional processes and impulse control in rats.</a> Nature Protocols. 3 (5), 759-767 (2008).</li><li>. Raspberry Pi foundation Available from: <a target="_blank" href="https://thepi.io/how-to-install-raspbian-on-the-raspberry-pi/">https://thepi.io/how-to-install-raspbian-on-the-raspberry-pi/</a> (2020)</li><li>. Pi-supply Available from: <a target="_blank" href="https://learn.pi-supply.com/make/bright-pi-quickstart-faq/">https://learn.pi-supply.com/make/bright-pi-quickstart-faq/</a> (2018)</li><li>. Python Available from: <a target="_blank" href="https://wiki.python.org/moin/BeginnersGuide/NonProgrammers">https://wiki.python.org/moin/BeginnersGuide/NonProgrammers</a> (2020)</li><li>. MathWorks Available from: <a target="_blank" href="https://mathworks.com/academia/highschool/">https://mathworks.com/academia/highschool/</a> (2020)</li><li>. Cran.R-Project.org Available from: <a target="_blank" href="https://cran.r-project.org/manuals.html">https://cran.r-project.org/manuals.html</a> (2020)</li><li>Liu, Y., Tian, C., Huang, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Critical assessment of correction methods for fisheye lens distortion. The international archives of the photogrammetry, remote sensing and spatial information sciences. , (2016).</li><li>Pereira, T. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fast+animal+pose+estimation+using+deep+neural+networks.">Fast animal pose estimation using deep neural networks.</a> Nature Methods. 16 (1), 117-125 (2019).</li><li>Graving, J. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DeepPoseKit,+a+software+toolkit+for+fast+and+robust+animal+pose+estimation+using+deep+learning.">DeepPoseKit, a software toolkit for fast and robust animal pose estimation using deep learning.</a> Elife. 8 (47994), (2019).</li><li>Geuther, B. Q., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Robust+mouse+tracking+in+complex+environments+using+neural+networks.">Robust mouse tracking in complex environments using neural networks.</a> Communications Biology. 2 (124), (2019).</li></ol>

While materials and resources from The Raspberry Pi foundation has been used and cited in this manuscript, the foundation was not actively involved in the preparation or use of equipment and data in this manuscript. The same is true for Pi-Supply. The authors have nothing to disclose.

This protocol describes how to build an inexpensive and flexible video camera that can be used to record videos from operant conditioning chambers and other behavioral test setups. It further demonstrates how to use DeepLabCut to track a strong light signal within these videos, and how that can be used to aid in identifying brief video segments of interest in video files that cover full test sessions. Finally, it describes how to use the tracking of a rat&#8217;s head to complement the analysis of behaviors during operant conditioning tests.
The protocol presents an alternative to commercially available video recording solutions for operant conditioning chambers. As noted, the major benefit of these is that they integrate with the operant chambers, enabling video recordings of specific events. The approach to identifying video segments of interest described in this protocol is more laborious and time-consuming compared to using a fully integrated system to record specific events. It is, however, considerably cheaper (a recent cost estimate for video monitoring equipment for 6 operant chambers was set to approximately 13,000 USD. In comparison, constructing six of the cameras listed here would cost about 720 USD). In addition, the cameras can be used for multiple other behavioral test setups. When working with the camera, it is important to be mindful of the areas of exposed electronics (the back of the camera component as well as the IR LED component), so that they do not come into contact with fluids. In addition, the ribbon cable attaching the camera module to the microcomputer and cables connecting the LEDs and switches to the GPIO pins may come loose if the camera is frequently moved around. Thus, adjusting the design of the camera case may be beneficial for some applications.
The use of DeepLabCut to identify video segments of interest and track animal movements offers a complement and/or alternative to manual video analysis. While the former does not invalidate the latter, we have found that it provides a convenient way of analyzing movements and behaviors inside operant chambers. In particular, it provides positional data of the animal, which contains more detailed information than what is typically extracted via manual scoring (i.e., actual coordinates compared to qualitative positional information such as &#8220;in front of&#8221;, &#8220;next to&#8221; etc.).
When selecting a protocol step indicator, it is important to choose one that consistently indicates a given step of the behavioral protocol, and that is unlikely to be blocked by the animal. If the latter is problematic, one may consider placing a lamp outside the operant chamber and film it through the chamber walls. Many operant conditioning chambers are modular and allow users to freely move lights, sensors and other components around. It should be noted that there are other software packages that also allow users to train neural networks in recognizing and tracking user-defined objects in videos24,25,26. These can likely be used as alternatives to DeepLabCut in the current protocol.
The protocol describes how to track the central part of a rats&#8217; head in order to measure movements inside the operant chambers. As DeepLabCut offers full freedom in selecting body parts or objects of interest, this can with convenience be modified to fit study-specific interests. A natural extension of the tracking described herein is to also track the position of the rats&#8217; ears and nose, to better judge not only head position but also orientation. The representative data shown here was recoded with Long Evans rats. These rats display considerable inter-individual variation in their pigmentation pattern, particularly towards their tail base. This may result in some difficulties applying a single trained neural network for the tracking of different individuals. To limit these issues, it is best to include video frames from all animals of interest in the training set for the network. The black head of the Long Evans rat provides a reasonably strong contrast against the metal surfaces of the chamber used here. Thus, obtaining accurate tracking of their heads likely requires less effort than with albino strains. The most critical step of obtaining accurate tracking with DeepLabCut or comparable software packages is to select a good number of diverse video frames for the training of the neural network. As such, if tracking of an object of interest is deemed to be sub-optimal, increasing the set of training frames should always be the first step towards improving the results.

In the field of behavioral neuroscience, researchers commonly use operant conditioning chambers to assess a wide range of different cognitive and psychiatric features in rodents. While there are several different manufacturers of such systems, they typically share certain attributes and have an almost standardized design1,2,3. The chambers are generally square- or rectangle-shaped, with one wall that can be opened for placing animals inside, and one or two of the remaining walls containing components such as levers, nose-poke openings, reward trays, response wheels and lights of various kinds1,2,3. The lights and sensors present in the chambers are used to both control the test protocol and track the animals&#8217; behaviors1,2,3,4,5. The typical operant conditioning systems allow for a very detailed analysis of how the animals interact with the different operanda and openings present in the chambers. In general, any occasions where sensors are triggered can be recorded by the system, and from this data users can obtain detailed log files describing what the animal did during specific steps of the test4,5. While this provides an extensive representation of an animal&#8217;s performance, it can only be used to describe behaviors that directly trigger one or more sensors4,5. As such, aspects related to how the animal positions itself and moves inside the chamber during different phases of the test are not well described6,7,8,9,10. This is unfortunate, as such information can be valuable for fully understanding the animal&#8217;s behavior. For example, it can be used to clarify why certain animals perform poorly on a given test6, to describe the strategies that animals might develop to handle difficult tasks6,7,8,9,10, or to appreciate the true complexity of supposedly simple behaviors11,12. To obtain such articulate information, researchers commonly turn to manual analysis of videos6,7,8,9,10,11.
When recording videos from operant conditioning chambers, the choice of camera is critical. The chambers are commonly located in isolation cubicles, with protocols frequently making use of steps where no visible light is shining3,6,7,8,9. Therefore, the use of infra-red (IR) illumination in combination with an IR-sensitive camera is necessary, as it allows visibility even in complete darkness. Further, the space available for placing a camera inside the isolation cubicle is often very limited, meaning that one benefits strongly from having small cameras that use lenses with a wide field of view (e.g., fish-eye lenses)9. While manufacturers of operant conditioning systems can often supply high-quality camera setups to their customers, these systems can be expensive and do not necessarily fit chambers from other manufacturers or setups for other behavioral tests. However, a notable benefit over using stand-alone video cameras is that these setups can often interface directly with the operant conditioning systems13,14. Through this, they can be set up to only record specific events rather than full test sessions, which can greatly aid in the analysis that follows.
The current protocol describes how to build an inexpensive and versatile video camera using hobby electronics components. The camera uses a fisheye lens, is sensitive to IR illumination and has a set of IR light emitting diodes (IR LEDs) attached to it. Moreover, it is built to have a flat and slim profile. Together, these aspects make it ideal for recording videos from most commercially available operant conditioning chambers as well as other behavioral test setups. The protocol further describes how to process videos obtained with the camera and how to use the software package DeepLabCut15,16 to aid in extracting video sequences of interest as well as tracking an animal&#8217;s movements therein. This partially circumvents the draw-back of using a stand-alone camera over the integrated solutions provided by operant manufacturers of conditioning systems, and offers a complement to manual scoring of behaviors.
Efforts have been made to write the protocol in a general format to highlight that the overall process can be adapted to videos from different operant conditioning tests. To illustrate certain key concepts, videos of rats performing the 5-choice serial reaction time test (5CSRTT)17 are used as examples.

<table><tbody><tr><td>32 Gb micro SD card with New Our Of Box Software (NOOBS) preinstalled</td><td>The Pi hut (https://thpihut.com)</td><td>32GB</td><td></td></tr><tr><td>330-Ohm resistor</td><td>The Pi hut (https://thpihut.com)</td><td>100287</td><td>This article is for a package with mixed resistors, where 330-ohm resistors are included.</td></tr><tr><td>Camera module (Raspberry Pi NoIR camera v.2)</td><td>The Pi hut (https://thpihut.com)</td><td>100004</td><td></td></tr><tr><td>Camera ribbon cable (Raspberry Pi Zero camera cable stub)</td><td>The Pi hut (https://thpihut.com)</td><td>MMP-1294</td><td>This is only needed if a Raspberry Pi zero is used. If another Raspberry Pi board is used, a suitable camera ribbon cable accompanies the camera component</td></tr><tr><td>Colored LEDs</td><td>The Pi hut (https://thpihut.com)</td><td>ADA4203</td><td>This article is for a package with mixed colors of LEDs. Any color can be used.</td></tr><tr><td>Female-Female jumper cables</td><td>The Pi hut (https://thpihut.com)</td><td>ADA266</td><td></td></tr><tr><td>IR LED module (Bright Pi)</td><td>Pi Supply (https://uk.pi-supply.com)</td><td>PIS-0027</td><td></td></tr><tr><td>microcomputer motherboard (Raspberry Pi Zero board with presoldered headers)</td><td>The Pi hut (https://thpihut.com)</td><td>102373</td><td>Other Raspberry Pi boards can also be used, although the method for automatically starting the Python script only works with Raspberry Pi zero. If using other models, the python script needs to be started manually.</td></tr><tr><td>Push button switch</td><td>The Pi hut (https://thpihut.com)</td><td>ADA367</td><td></td></tr><tr><td>Raspberry Pi power supply cable</td><td>The Pi hut (https://thpihut.com)</td><td>102032</td><td></td></tr><tr><td>Raspberry Pi Zero case</td><td>The Pi hut (https://thpihut.com)</td><td>102118</td><td></td></tr><tr><td>Raspberry Pi, Mod my pi, camera stand with magnetic fish eye lens and magnetic metal ring attachment</td><td>The Pi hut (https://thpihut.com)</td><td>MMP-0310-KIT</td><td></td></tr></tbody></table>

tracking rats in operant conditioning chambers using a versatile homemade video camera and deeplabcut

Operant conditioning chambers are used to perform a wide range of behavioral tests in the field of neuroscience. The recorded data is typically based on the triggering of lever and nose-poke sensors present inside the chambers. While this provides a detailed view of when and how animals perform certain responses, it cannot be used to evaluate behaviors that do not trigger any sensors. As such, assessing how animals position themselves and move inside the chamber is rarely possible. To obtain this information, researchers generally have to record and analyze videos. Manufacturers of operant conditioning chambers can typically supply their customers with high-quality camera setups. However, these can be very costly and do not necessarily fit chambers from other manufacturers or other behavioral test setups. The current protocol describes how to build an inexpensive and versatile video camera using hobby electronics components. It further describes how to use the image analysis software package DeepLabCut to track the status of a strong light signal, as well as the position of a rat, in videos gathered from an operant conditioning chamber. The former is a great aid when selecting short segments of interest in videos that cover entire test sessions, and the latter enables analysis of parameters that cannot be obtained from the data logs produced by the operant chambers.

Watch this Scientific Journal Video about Tracking Rats in Operant Conditioning Chambers Using a Versatile Homemade Video Camera and DeepLabCut at JoVE.com

Tracking Rats in Operant Conditioning Chambers Using a Versatile Homemade Video Camera and DeepLabCut

This protocol describes how to build a small and versatile video camera, and how to use videos obtained from it to train a neural network to track the position of an animal inside operant conditioning chambers. This is a valuable complement to standard analyses of data logs obtained from operant conditioning tests.

Operant conditioning chambers are used to perform a wide range of behavioral tests in the field of neuroscience. The recorded data is typically based on ...

tracking-rats-operant-conditioning-chambers-using-versatile-homemade

Nanyang Technological University

Research

JoVE Journal

Behavior

12.3K Views.  Lund University. Door het volgen van de methoden die in dit protocol onderzoekers in staat zullen zijn om op te nemen en te analyseren video's van knaagdieren het uitvoeren van complexe gedragstests in operant conditionering kamers. Het protocol beschrijft hoe je goedkope videocamera's bouwen en deze samen met een open source tracking software gebruiken. Dit is een aantrekkelijke aanpak voor labs met een beperkt budget.De methode is waardevol voor onderzoeksprojecten waarbij operant conditionering bij ...

Video: Tracking Rats in Operant Conditioning Chambers Using a Versatile Homemade Video Camera and DeepLabCut

Mouse Short- and Long-term Locomotor Activity Analyzed by Video Tracking Software

Locomotor activity (LMA) is a simple and easily performed measurement of behavior in mice and other rodents. Improvements in video tracking software (VTS) have allowed it to be coupled to LMA testing, dramatically improving specificity and sensitivity when compared to the line crossings method with manual scoring. In addition, VTS enables high-throughput experimentation. While similar to automated video tracking used for the open field test (OFT), LMA testing is unique in that it allows mice to remain in their home cage and does not utilize the anxiogenic stimulus of bright lighting during the active phase of the light-dark cycle. Traditionally, LMA has been used for short periods of time (mins), while longer movement studies (hrs-days) have often used implanted transmitters and biotelemetry. With the option of real-time tracking, long-, like short-term LMA testing, can now be conducted using videography. Long-term LMA testing requires a specialized, but easily constructed, cage so that food and water (which is usually positioned on the cage top) does not obstruct videography. Importantly, videography and VTS allows for the quantification of parameters, such as path of mouse movement, that are difficult or unfeasible to measure with line crossing and/or biotelemetry. In sum, LMA testing coupled to VTS affords a more complete description of mouse movement and the ability to examine locomotion over an extended period of time.

Locomotor activity (LMA) is a simple and easily performed measurement of behavior in mice. Coupling of video tracking software (VTS) and LMA allows for the improvement of specificity and sensitivity, especially when compared with the manual, line crossing method of LMA analysis. Additionally VTS allows long-term tracking of mouse LMA.

Locomotor  activity (LMA) is a simple and easily performed measurement of behavior in mice  and other rodents. Improvements in video tracking software ...

Automated Visual Cognitive Tasks for Recording Neural Activity Using a Floor Projection Maze

Neuropsychological tasks used in primates to investigate mechanisms of learning and memory are typically visually guided cognitive tasks. We have developed visual cognitive tasks for rats using the Floor Projection Maze1,2&#160;that are optimized for visual abilities of rats permitting stronger comparisons of experimental findings with other species.
In order to investigate neural correlates of learning and memory, we have integrated electrophysiological recordings into fully automated cognitive tasks on the Floor Projection Maze1,2. Behavioral software interfaced with an animal tracking system allows monitoring of the animal's behavior with precise control of image presentation and reward contingencies for better trained animals. Integration with an in vivo electrophysiological recording system enables examination of behavioral correlates of neural activity at selected epochs of a given cognitive task.
We describe protocols for a model system that combines automated visual presentation of information to rodents and intracranial reward with electrophysiological approaches. Our model system offers a sophisticated set of tools as a framework for other cognitive tasks to better isolate and identify specific mechanisms contributing to particular cognitive processes.

We describe protocols for training rats for chronic electrophysiological recordings in fully automated cognitive tasks on a Floor Projection Maze.

Neuropsychological tasks used in primates to investigate mechanisms of learning and memory are typically visually guided cognitive tasks. We have ...

An Automated T-maze Based Apparatus and Protocol for Analyzing Delay- and Effort-based Decision Making in  Free Moving Rodents

Many neurological and psychiatric patients demonstrate difficulties and/or deficits in decision making. Rodent models are helpful to produce a deeper understanding of the neurobiological causes underlying the decision-making problems. A cost-benefit based T-maze task is used for measuring decision making in which rodents choose between a high reward arm (HRA) and a low reward arm (LRA). There are two paradigms of the T-maze decision-making task, one in which the cost is a time delay and the other in which it is physical effort. Both paradigms require a tedious and labor-intensive management of experimental animals, multiple doors, pellet reward, and arm choice recordings. In the current work, we invented an apparatus based on traditional T-maze with full automation for pellet delivery, door management and choice recordings. This automated setup can be used for the evaluation of both delay- and effort-based decision making in rodents. With the protocol described here, our lab investigated the decision-making phenotypes of multiple genetically modified mice. In the representative data, we showed that the mice with ablated medial habenular showed aversions of both delay and effort and tended to choose the immediate and effortless reward. This protocol helps to decrease the variability caused by experimenter intervention and to enhance experiment efficiency. In addition, chronic silicon probe or microelectrode recording, fiber-optic imaging and/or manipulation of neural activity can be easily applied during the decision-making task using the setup described here.

This article introduces an automated T-maze apparatus that we invented, and a protocol based on this apparatus for analyzing delay-based decision making and effort-based decision making in free moving rodents.

Many neurological and psychiatric patients demonstrate difficulties and/or deficits in decision making. Rodent models are helpful to produce a deeper ...

A Novel Single Animal Motor Function Tracking System Using Simple, Readily Available Software

We have recently demonstrated that implanting intracortical microelectrodes in the motor corteces of rats&#160;results in immediate and lasting motor deficits. Motor impairments were manually quantified through an open field grid test to measure the gross motor function and through a ladder test to measure the fine motor function. Here, we discuss a technique for the automated quantification of the video-recorded tests using our custom Capadona Behavioral Video Analysis System: Grid and Ladder Test, or BVAS. Leveraging simple and readily available coding software (see the Table of Materials), this program allows for the tracking of a single animal on both the open field grid and the ladder tests. In open field grid tracking, the code thresholds the video for intensity, tracks the position of the rat over the 3 min duration of the grid test, and analyzes the path. It then computes and returns measurements for the total distance traveled, the maximum velocity achieved, the number of left- and right-handed turns, and the total number of grid lines crossed by the rat. In ladder tracking, the code again thresholds the video for intensity, tracks the movement of the rat across the ladder, and returns calculated measurements including the time it took the rat to cross the ladder, the number of paw slips occurring below the plane of the ladder rungs, and the incidence of failures due to stagnation or reversals. We envision that the BVAS developed here can be employed for the analysis of motor function in a variety of applications, including many injury or disease models.

The current study aimed to automate the quantification of motor deficits in rats. The initial evaluation model assesses motor loss resulting from an intracortical microelectrode implantation in the motor cortex. We report on the development and use of a tracking algorithm using easily adaptable, simple, and readily available coding software.

We have recently demonstrated that implanting intracortical microelectrodes in the motor corteces of rats&#160;results in immediate and lasting motor ...

Elevated Plus Maze Test Combined with Video Tracking Software to Investigate the Anxiolytic Effect of Exogenous Ketogenic Supplements

The overall goal of this study is to describe the methodology of the elevated plus maze (EPM) test in combination with a video tracking software. The purpose of the method is to document the effect of various potential anxiolytic treatments on laboratory rodent models. The EPM test is based on the rodents&#39; proclivity toward protected, enclosed dark spaces and unconditioned fear of open spaces and heights, and their innate intense motivation to explore novel environments. The EPM test is a widely used behavioral test for investigating the anxiolytic or anxiogenic responses of rodents given drugs that are known to affect behavior. Observation demonstrating a decreased proportion of time spent on closed arms, an increased proportion of time spent on open arms, a reduced number of entries to closed arms, and an elevated number of entries to open arms measured by the EPM test may reflect reduced anxiety levels. Using this method, the effect of exogenous ketone supplements on anxiety-related behavior is tested in Sprague Dawley (SPD) rats. Exogenous ketone supplements are chronically fed to the rats for 83 days or subchronically and acutely orally gavaged, daily for 7 days, before conducting the EPM test. Behavioral data collection is performed using the SMART video tracking system by a blinded observer at the end of the treatments. The main findings indicate that the EPM test is an effective method to detect the ketone supplement-induced anxiolytic effect and can be considered a sensitive measure to assess changes in anxiety behavior associated with drug- or metabolic-based therapies.

Here, we present a protocol to investigate changes in the anxiety level of rodent animal models. The elevated plus maze (EPM) test, used together with a video tracking software, provides a reliable method to document the effect of various potential anxiolytic treatments in preclinical laboratory scenarios.

The overall goal of this study is to describe the methodology of the elevated plus maze (EPM) test in combination with a video tracking software. The ...

3D Kinematic Gait Analysis for Preclinical Studies in Rodents

The utility of three-dimensional (3D) kinematic motion analysis systems is limited in rodents. Part of the reason for this inadequacy is the use of complex algorithms and mathematical modeling that accompany 3D data collection and analysis procedures. This work provides a simple, user-friendly, step-by-step detailed methodology for 3D kinematic gait analysis during treadmill locomotion in healthy and neurotraumatic rats using a six-camera motion capture system. Also provided are details on 1) calibration of the system in an experimental set-up customized for quadrupedal locomotion, 2) data collection for treadmill locomotion in adult rats using markers positioned on all four limbs, 3) options available for video tracking and processing, and 4) basic 3D kinematic data generation and visualization and quantification of data using the built-in data collection software. Finally, it is suggested that the utility of this motion capture system be expanded to studying a variety of motor behaviors before and after neurotrauma.

Presented here is a protocol to collect and analyze three-dimensional kinematics of quadrupedal locomotion in rodents for preclinical studies.

The utility of three-dimensional (3D) kinematic motion analysis systems is limited in rodents. Part of the reason for this inadequacy is the use of ...

Automated Rat Single-Pellet Reaching with 3-Dimensional Reconstruction of Paw and Digit Trajectories

Rodent skilled reaching is commonly used to study dexterous skills, but requires significant time and effort to implement the task and analyze the behavior. Several automated versions of skilled reaching have been developed recently. Here, we describe a version that automatically presents pellets to rats while recording high-definition video from multiple angles at high frame rates (300 fps). The paw and individual digits are tracked with DeepLabCut, a machine learning algorithm for markerless pose estimation. This system can also be synchronized with physiological recordings, or be used to trigger physiologic interventions (e.g., electrical or optical stimulation).

Rodent skilled reaching is commonly used to study dexterous skills, but requires significant time and effort to implement the task and analyze the behavior. We describe an automated version of skilled reaching with motion tracking and three-dimensional reconstruction of reach trajectories.

Rodent skilled reaching is commonly used to study dexterous skills, but requires significant time and effort to implement the task and analyze the ...

A System for Tracking the Dynamics of Social Preference Behavior in Small Rodents

Exploring the neurobiological mechanisms of social behavior requires behavioral tests that can be applied to animal models in an unbiased and observer-independent manner. Since the beginning of the millennium, the three-chamber test has been widely used as a standard paradigm to evaluate sociability (social preference) and social novelty preference in small rodents. However, this test suffers from multiple limitations, including its dependence on spatial navigation and negligence of behavioral dynamics. Presented and validated here is a novel experimental system that offers an alternative to the three-chamber test, while also solving some of its caveats. The system requires a simple and affordable experimental apparatus and publicly available open-source analysis system, which automatically measures and analyzes multiple behavioral parameters at individual and population levels. It allows detailed analysis of the behavioral dynamics of small rodents during any social discrimination test. We demonstrate the efficiency of the system in analyzing the dynamics of social behavior during the social preference and social novelty preference tests as performed by adult male mice and rats. Moreover, we validate the ability of the system to reveal modified dynamics of social behavior in rodents following manipulations such as whisker trimming. Thus, the system allows for rigorous investigation of social behavior and dynamics in small rodent models and supports more accurate comparisons between strains, conditions, and treatments.

Described here is a novel automated experimental system that offers an alternative to the three-chamber test and also solves several caveats. This system supplies multiple behavioral parameters that enable rigorous analysis of small rodent behavioral dynamics during the social preference and social novelty preference tests.

Exploring the neurobiological mechanisms of social behavior requires behavioral tests that can be applied to animal models in an unbiased and ...

Real-Time Mouse Eye Squint Detection for Migraine Pain Tracking Using DeepLabCut

An Automated Squint Method for Time-syncing Behavior and Brain Dynamics in Mouse Pain Studies

Spontaneous pain has been challenging to track in real time and quantify in a way that prevents human bias. This is especially true for metrics of head pain, as in disorders such as migraine. Eye squint has emerged as a continuous variable metric that can be measured over time and is effective for predicting pain states in such assays. This paper provides a protocol for the use of DeepLabCut (DLC) to automate and quantify eye squint (Euclidean distance between eyelids) in restrained mice with freely rotating head motions. This protocol enables unbiased quantification of eye squint to be paired with and compared directly against mechanistic measures such as neurophysiology. We provide an assessment of AI training parameters necessary for achieving success as defined by discriminating squint and non-squint periods. We demonstrate an ability to reliably track and differentiate squint in a CGRP-induced migraine-like phenotype at a sub second resolution.

Author Spotlight: Deciphering Electrical Networks Behind Complex Brain Activities and Disorders

This protocol provides a method for tracking automated eye squint in rodents over time in a manner compatible with time-locking to neurophysiological measures. This protocol is expected to be useful to researchers studying mechanisms of pain disorders such as migraine.

Spontaneous pain has been challenging to track in real time and quantify in a way that prevents human bias. This is especially true for metrics of head ...

Comprehensive Understanding of Inactivity-Induced Gait Alteration in Rodents

It is well known that disuse affects neural systems and that joint motions become altered; however, which outcomes properly exhibit these characteristics is still unclear. The present study describes a motion analysis approach that utilizes three-dimensional (3D) reconstruction from video captures. Using this technology, disuse-evoked alterations of walking performances were observed in rodents exposed to a simulated microgravity environment by unloading their hindlimb by their tail. After 2 weeks of unloading, the rats walked on a treadmill, and their gait motions were captured with four charge-coupled device (CCD) cameras. 3D motion profiles were reconstructed and compared to those of control subjects using the image processing software. The reconstructed outcome measures successfully portrayed distinct aspects of distorted gait motion: hyperextension of the knee and ankle joints and higher position of the hip joints during the stance phase. Motion analysis is useful for several reasons. First, it enables quantitative behavioral evaluations instead of subjective observations (e.g., pass/fail in certain tasks). Second, multiple parameters can be extracted to fit specific needs once the fundamental datasets are obtained. Despite hurdles for broader application, the disadvantages of this method, including labor intensity and cost, may be alleviated by determining comprehensive measurements and experimental procedures.

The present protocol describes three-dimensional motion tracking/evaluation to depict gait motion alteration of rats after exposure to a simulated disuse environment.

It is well known that disuse affects neural systems and that joint motions become altered; however, which outcomes properly exhibit these characteristics ...

Tracking Rats in Operant Conditioning Chambers Using a Versatile Homemade Video Camera and DeepLabCut

Samenvatting

Meer video's verkennen

Hoofdstukken in deze video